"The Upvc Door Handle Replacement Awards: The Best, Worst And Weirdest Things We've Seen Choosing the Right UPVC Door Handle Replacement

It's easy to replace your upvc handles however, choosing the correct handle can be difficult. Modern double-glazed handles are equipped with spring cassettes, but older handles aren't.

If your upvc handle is loose and floppy there may be an issue with the internal components of the multipoint lock. This article will cover a number of potential problems and their causes.

Handles that slide or droop

uPVC handles can sustain wear and tear, especially in older properties. A broken spring cassette inside the door lever is the most frequent reason for a floppy handle. This is usually due to excessive force and the square spindle that supports the cassette could be moved or rounded off.

The good news is that replacing the door handle made of uPVC is a fairly simple task and can be done in just a few minutes. The first step is to take off the old handle unit. To remove it, loosen the fixing screws on the back of the lever. After the handles have been removed, you can remove the cassette from the square spindle and replace it with an entirely new one.

On the internet, you can select from a range of uPVC handles available with different finishes. The finish you select will determine the durability of your handle as well as how it is easy to clean. Finishes like Resista, Stainless Steel, or PVD are designed to resist corrosion and last up to 25 years.

After selecting a colour or style, you are able to select the kind of handle you require. The most popular types are pad and lever arrangement. Lever pads feature a lever on the inside and an outside paddle which is typically used as a security feature to stop unauthorised access.

Next, measure and note the dimensions of the handle you currently have. You'll need to determine the PZ dimension, which is the distance between the screw hole and the center of the lever. You'll also need to know how long the handle is as well as the size of its keyhole. Once you have the measurements you can then compare these to the handle sizes matrix to determine the appropriate replacement.

Broken springs

Over time uPVC door handles can get loose or wobbly and occasionally the spring cassette inside may break. The tiny springs bring the lever of the handle to a horizontal position. without them your doors will not lock properly.

Modern uPVC handles are made with these cassettes integrated directly into the backplate. However, older uPVC doors typically include these springs in the lock mechanism. This isn't something that can be fixed on your own, but it's worth asking your locksmith to look at this as it could be the reason behind the sagging or drooping uPVC door handles.

One of the most frequent problems that is commonly encountered with uPVC door handles is that they get unstable or wobbly after a certain period of time, and this is typically due to worn-out springs that can be easily fixed. This is typically caused by excessive handling of the handle. The square spindle inside the handle wears down and cause the springs to move.

In order to rectify this you will need to open the door and loosen the fixing screws on the back of the handle plate. This can be done using the Philips screwdriver. Once the screws are removed, the handle can be removed and the handle plates pulled apart carefully. You can then remove the springs that were in use and replace them with new ones.

Depending on the kind of handle you have the distance between the two screws may differ and it is important to know when purchasing a replacement. This measurement is known as the PZ and it is essential to use a measuring tape that is calibrated to ensure an precise reading.

After replacing the springs you should be able to use the handle without issue. It is recommended to lubricate the internal mechanism to ensure that everything is working exactly as it should. This will ensure that your uPVC door is as secure as it is, and improve their comfort in the long run.

Handles that slide around

Handles that slide can be caused by many things. One of the most frequent causes is that the levers of the handle are not aligned with the lock. This can happen on both uPVC doors and composite doors. However, it's more evident on older doors since they are made of cheaper materials that don't stand up to the elements.

This issue can be fixed by a professional who will realign the handles and ensure that they are in line with the door lock. They'll also examine the lock to see what needs to be fixed. In many cases, a small adjustment to the handle springs is all that's needed to resolve this issue.


Changing your uPVC door handle is easy enough, but you need to measure the handles that are in use to ensure that you have the right size replacement. You will need to measure the distance of the two screws, as well as the size of the keyhole and lever, as well as the distance between them. You can then use this uPVC handle size guide to locate the appropriate replacement for your home.

Once you have the measurements, the next step is to remove the old uPVC handles. It's usually a simple procedure and requires only the use of a screwdriver. Once the screws are removed, you'll have to unscrew the handle and then replace the new handle.

It's important to secure the door using an appropriate wedge prior to beginning. This will stop it from closing during the course of your work. After you remove the handle, you will be able to access the parts beneath the door that cause the door to move.

If you don't have time or nerves to tackle this job yourself, an expert handyman from Fantastic Services can help. They'll employ locksmith techniques to open the door without causing damage and will then replace the damaged handle, ensuring that everything is working exactly as it should.

Damaged gearbox

A damaged gearbox could cause the handle made of upvc to become stiff and lose functionality. This could also stop the lock from being able to be opened using a key. This could be extremely dangerous and should be addressed as soon as possible. If you're unable to solve the problem yourself it is crucial to contact a locksmith as they have the expertise and tools necessary to get the job done correctly.

The first step is removing the handle from the cover plate. This can be done using a screwdriver that has flat-headed tips. After you have removed your handle, you can then take out the middle screw that holds the barrel in the position. Once you have removed the middle screw, you will then loosen the two screws that hold the barrel. You can then pull the barrel from the door. You will need to prop the door open to accomplish this, so make sure that you have someone to help.

After you have removed the cylinder, you can replace the cylinder with a new one. It is important to make sure that the new cylinder is the exact size as the previous one. You may have an incorrectly aligned handle. This can cause a variety of issues, such as leaks and drips.

Many doors made of upvc feature adjustment slots that allow you to adjust the handle's tension or release. They are usually on the inside of the door, near where the handle is connected to the cylinder. Allen wrenches can be used to tighten the slots for adjustment. After you have made the adjustments you can place the handle back on & screw it in. Then, upvc door handle can test the handle and make sure it functions as intended.

If the door handle of upvc becomes floppy or loose when it is closed, this is usually an indication that the gearbox in the upvc has broken down or internal spring components are breaking down. This could cause the upvc multipoint lock to fail and leave your door open to intruders. If this happens, it will be necessary to replace the upvc gearbox. The cost will range from PS145 to PS280, including labour.