20 Myths About Upvc Door Replacement Lock: Busted How to Replace a UPVC Door Replacement Lock

If your door lock starts jamming or simply doesn't work as it ought to, it's time to consider replacing it. The process might seem complicated but it's actually quite simple and doesn't require the services of a locksmith.

A few basic tools, a bit of patience and a lot of love will suffice. Here's how:

Measure the Door

It's time to replace your uPVC doors if they are experiencing difficulty locking them or if they don't shut. If you've recently relocated or a tenant has moved out without returning keys, or your multipoint gear box is showing signs of wear and tear, it's simple to change the barrel on your lock to an alternative that offers an additional layer of security.

Before you purchase a new lock, you'll need make sure you have key measurements to ensure that the new lock fits properly and won't affect your security at home. The backset is the most important. This is the distance that runs from the center of the keyhole bore hole to the edge of the door. It's usually 2 3/8 or even 2 3/4 inches. Use an measuring tape or ruler to measure this and record the results on a piece of paper or notepad.

You'll also need to know the faceplate width. This is the size of the piece that covers the lock mechanism. If you can, buy a replacement lock from the same manufacturer since they are manufactured to the same dimensions. If you are unable to locate the name of the manufacturer or mark, simply take a measurement of the width of the existing cylinder. You can also check this by placing a pencil on the keyhole and measuring from the bottom of the lock up to the centre of the pencil mark on the opposite side of the cylinder.

Once you have the measurements you can begin removing the old cylinder. Begin by loosening the screw that holds the handle in place with the Phillips-head screwdriver. Then, loosen the screws that hold the handles' exterior and interior together. After these screws have been removed, you can remove the barrel screw on the exterior handle and take the cylinder off.


If the cylinder becomes stuck in the lock, you could try using WD-40, or another oil or lubricant. It is important not to force it out - excessive force can cause damage to the internal gearbox and lead to more problems with the lock. You might also look into upgrading your lock with anti-snap or anti-bump security, which are more robust against attacks from thieves.

Source the Lock

When buying the latest door lock, you must take into consideration some aspects. To ensure quality and fit make sure you purchase the right size cylinder and from a trusted manufacturer. You'll also require some basic tools to do the job, including a screwdriver, tape measure and a rubber mallet.

There are several signs that your upvc door lock is about to wear out and requires replacement. The lock could be showing obvious damage, or the handle could be loose and not fit correctly. If the lock is jamming or doesn't lock at all then it's time to consider replacing it.

Installing the lock correctly is important once you've chosen the right one. This will ensure that it locks and works properly. Follow the manufacturer's directions when installing the multipoint lock mechanism into the upvc panel. Attach the appropriate faceplates, handles, and other components. Test the mechanism by locking the door and unlocking it from the outside and inside. If everything is in order, it's time to celebrate your achievement.

The process of replacing a door lock made of upvc may sound intimidating however, it's an simple DIY project that can be done without the assistance of a locksmith. It's not difficult to change your lock if you are aware of the indicators and have the appropriate tools.

Remember that like any moving part that a door lock made of upvc will benefit from some lubrication to keep it running smoothly. A few sprays of silicone or graphite powder lubricant can help to prolong their lifespan by ensuring they're free of excess friction that can wear them down prematurely. Regularly cleaning your door's lock mechanisms with WD-40 and a damp cloth can help to keep them in good condition.

Take the Cylinder off

If you're having trouble with your upvc doors and windows, it could be time to replace the barrel on your lock. This is a simple DIY project and can be completed in few minutes. It's also an effective method to ensure home security. This process requires that you determine the brand of the lock to find an appropriate replacement.

A broken door lock could be a huge hassle, and it can also be a security risk. It's not uncommon for locks on uPVC doors to experience issues, and it's important to maintain regular maintenance. In fact, experts suggest that you change your locks every seven years. If your lock is seriously damaged or you are not satisfied with its performance, professional help might be worthwhile.

In most cases, a simple pin-based system, referred to as a euro cylinder is used to construct uPVC doors. They are easy to use and are not likely to break down, but are still vulnerable. It's therefore worth replacing your lock with a modern model that has anti-snap and anti-bump protection to prevent burglary.

The first step in changing your uPVC lock is to remove the handle and opening the old cylinder. It can be a challenge since there are screws hidden beneath the handles. Make sure you have a screwdriver in your bag. Next, you'll want to try moving the cylinder until it becomes loose. Once it's loose then you can pull it out of the socket.

Once you've found an appropriate replacement, it's simply the matter of screwing it into place and reversing the removal process. Be cautious not to tighten too much because this can cause the cylinder to become stuck in the door and stop working as it should. Test the uPVC replacement lock by opening and closing it both from inside and outside. You should now be able to lock and unlock the door using your key. If not, ensure that the screws are tight and try again.

Install the Lock

You'll have to do some research to make sure that the lock you select is appropriate for your door. You'll be required to be aware of the faceplate and backset measurements - which is the distance from the edge of the door to the center of the handle or cylinder and also the type of lock to ensure that the new lock is properly fitted without harming security.

After you've completed that, you can start installing the new lock. It is recommended to open the door with a prop, or lock it so that it does not close during the installation process. To begin, use a Phillips head driver to loosen the screws holding the handle in place. Once they're removed then you'll be able to pull the handle's outer and inner parts apart.

Now you can begin to take off the old cylinder, which you'll need to do by removing it from its barrel. Once you've removed the cylinder and the barrel, you can install your replacement lock, making sure that you follow the directions for your particular model. Once the lock is installed you can test it by opening and shutting the door from both the inside and the outside, then locking and unlocking it from the interior and then trying it again.

There are many reasons why you might need to change the locks on your uPVC door. You might have recently moved in and haven't had an entry key. The previous tenant might not have returned it. Or you might prefer to upgrade your lock to something more secure. It should take no more than five minutes to change the lock cylinder.

No matter if you have a multipoint lock or single-point lock, they all work on the same basic mechanism. There are some issues that can arise with the lock, for instance, a failure to close or jam. These issues could be caused by weather conditions, wear and tear, or just everyday use. Luckily, upvc door lock replacement of these issues can be solved with some minor maintenance or with the help of locksmith.