The Intermediate Guide On Window Repair Window Repairs

Window repairs can help homeowners save money and ensure their comfort. Window replacements may be required in the event of severe damage such as broken glass, or a broken window frame.

Many other issues can be solved to prolong the longevity of windows. Common problems include:

Broken or cracked panes

It's a rock that's been that was tossed by your lawnmowers or a tree branch that has been blown by high winds, cracked window glass isn't just visually unappealing, but also can result in higher electric bills since the broken pieces allow cold air to enter your home. It's relatively easy to repair windows with damaged panes.

Start by carefully removing the glass using gloves and safety glasses. You may need to employ a utility knife to remove any remaining putty or old glazing compound around the edges of the frame. Then, use a soft paper towel or cloth to clean the surface of both the glass and the wood of the frame.

After cleaning the area, apply silicone caulking that is water-proof to the frame's perimeter. This will stop water from leaking into the frame through the crack and cause further damage.

If you have double-paned glass, cracks that are severe could damage the gas layer between the panes, making your windows less efficient in insulating. If the crack is severe enough to compromise the integrity of the glass or the glass has an inner pane that's completely missing, it's the time to call a professional.

Thermal stress cracks may also occur when there is an extreme temperature difference inside and outside your home. The glass is then able to expand and contract. If the cracks are on two sides of a glass, it is recommended to replace it rather than attempt to repair it.

Clear tape can be used to fill cracks in windows that aren't yet ready to be replaced. It can also keep out bugs and cold wind. window repairs can cut a nylon stocking large enough to completely cover the crack and then glue it to the surface with duct tape. It's not an indefinite solution, but it can keep insects and cold air away from your home. If you notice cracks on your older windows it is recommended to contact the local company to determine if replacing the whole window is a better option.

Rotten Wood

Wood rot is a common problem for windows. It can damage a home's appearance and pose a safety risk. It is, however, possible to repair rotted wood. First, you need to make sure that the root of the rot has been addressed. Examine for leaks in the roof and other areas where water could get into the wood.

Next, you will need to remove any rotten areas of the window frame. This can be accomplished with either a chisel, a rasp or claw hammer. After removing the decayed wood, you'll need to replace it with fresh wood. Pre-treated wood is suggested for this project, as it is resistant to decay. If you are not able to replace the damaged timber then you can use wood filler and hardener to strengthen the damaged area. Many hardware stores will sell this kind of product. To get the best results, make sure you follow the instructions on the label.

After you have replaced the decayed areas of the windowsill, it is crucial to safeguard the newly repaired area. Apply a water-resistant sealant to the wood. A product like Sikkens is a good choice for this task.

Make use of a two-part epoxy to protect the wood from further damage. It is easy to apply and leaves a nice finish. It is important to follow the instructions on the label. After the epoxy filler dries, you can sand down the surface of the wooden. Start with a rough sandpaper then move to more smoother grades.

The last thing you want to do is to make the area that has been damaged by expose it to more water. It is therefore a good idea to cover the area that has been repaired with an oil-based primer that will shield it from moisture. Then, you can reapply the waterproof wood sealant.

It won't open

The reason a window won't open can be the result of various factors. Wood frames can warp during humid weather, the house might have sunk or someone may have nailed it shut for security reasons. However, with a bit of patience and the right tools, all windows that are locked can be opened.


Gunk or debris that has accumulated can be a major cause of windows that aren't opening. Acme Glass notes that dirt and grime builds up over time on sliding tracks, hinges, and locks. In addition, metal hardware can be rusty when it comes in contact with humidity or direct sunlight. Making sure these areas are lubricated with spray grease can prevent corrosion and keep your window operating correctly.

The pulleys that raise or lower the window can become loose, or break. These components may lose tension and get blocked especially if the window is located two or more stories higher than the ground.

If you're having difficulty opening windows, try using a pry bar to gently push the window open a little at a time. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. You can also try running a hair dryer along the edges of the frame for several minutes to warm the wood and allow it move more easily.

A faulty spring can also be the reason for windows that don't lift or lower. Depending on the manufacturer of your windows, you'll need to refer to the manual of your owner for additional instructions.

If you've tried cleaning the moving parts of your windows and lubricating them, but they're still unable to open it could be the right time to replace windows with energy-efficient, new windows from Homespire Windows and Doors. Don't let your windows slide from functional to inoperable because a window that isn't properly shut could expose your home to burglary and water damage. Contact our team today for more information on our replacement windows and our services!