This Week's Top Stories About Upvc Replacement Door Handles UPVC Replacement Door Handles

As time passes, the handles on your doors will wear down and need to be changed. It is crucial to match the dimensions of the old handles when replacing them.

The top screw position as well as the lever and keyhole dimensions are the three measurements that you need to check. Use the size guide to assist you.

Inline Lever/Lever

A lever door handle is a modern handle that can be used on replacement or new doors. This style of handle is available in a variety of designs and finishes. A number of manufacturers offer this type of handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The handles made of uPVC/Composite are made from durable materials, and are ideal for doors with multiple points that require a strong design. The handles are inline and work with the same spindle as well as screw fixings so they can be easily incorporated into new or existing uPVC/Composite doors.

The handle can be positioned and angled to suit any user. The handle has been tested to 200,000 cycles. This helps to ensure that the quality of finish and performance over time. The sprung lever can be reduced to accommodate a wider range of locks. This is particularly useful in doors that are narrower, where the cylinder is further away from the door. A lever that is shorter can be used on doors with a latch which can be operated with the thumb located on the inside.

Lever Pad


A Lever Pad upvc door handle operates differently to the lever type handles that are found on the majority of doors. These handle types are either operated by one spindle, or two spindles, inline or offset. They are typically used on UPVC double glazed doors. They come in many variations & finishes.

The handles have been tested to at least 200,000 cycles and are available in various finishes, including White, Silver, Chrome & Gold. The finish is in line with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, which gives the handle a high level of durability and performance for the intended use.

All UPVC handle lever pads include a spindle and screws and can be installed on the uPVC door. The backplate fixation centers of 211mm allow for a wider handle, which is often beneficial when replacing an old or faulty multi-point door lock mechanism. The handle levers come with springs, which eliminate the problem of handles for doors that slide out of their horizontal position when they are not being used.

It is important to ensure that the PZ dimensions for both the multipoint lock as well as the uPVC doors when choosing a replacement UPVC spindle and handle. This measurement may also be called 'handle centres or cylinder centres'. It is important for matching the correct handles.

When you have the right PZ size, you'll need to ensure that the lever pads and push pads are a appropriate shape to accommodate the American with Disabilities Act (ADA) compliant handles that you need for your doors. These are typically of a round or square design with an internal lever and an external push pad.

Most of the UPVC lever pads we offer are sprung, which means that they will return to their horizontal position when not being used, instead of hanging out and possibly securing in the frame. This prevents drafts and cold air from entering a home. It is also the case that the majority of the UPVC lever pad handles are swivel, allowing you to install them on either side of the door.

Euro Cylinder

Cylinder locks can be found on uPVC and other types of doors. The cylinder lock operates by a key which unlocks the cylinder's casing. This reveals pins that can be aligned to the pins in the lock, allowing them to turn the revolving camera, thereby opening the door. Euro Cylinders can be fitted with up to six pins, with internal and external doors typically having different levels of security.

Choosing the right cylinder is crucial; it depends on the way your doors and handle are utilized. External doors, for example, should be fitted with cylinders that are more secure, whereas doors inside can be secured using the standard cylinder. upvc door handles are equipped with additional features that can increase security, like anti-drill or anti-bump properties.

To make sure that the euro cylinder is the correct size for your door, it should be measured accurately. The cylinder must be measured from the central screw hole to the ends of the cylinder. This includes the thumb turn, in the event that one is present. If you are unable measure it using the lock in a fixed position, you can take it out of it. It is crucial to not have a extension of the cylinder beyond the handle or escutcheon. This can make it vulnerable to lock snapping attacks.

The design of many modern cylinders comes with anti-drilling as well as bump resistance features. These are designed to reduce attacks by forcing cylinders to rotate in a new direction. This will help to deflect attacks and keep your door safe.

Certain cylinders are made to withstand snapping. This is a typical attack on cylinders. A specially designed tool is used to break the break line of the lock and then the front of cylinder is snapped off. This is a lot faster and easier to achieve than gaining access through multipoint locks and leaves little evidence of a break-in which can hinder an insurance claim.

Spring Cassette

The spring cassette is situated within the base plate of the door handle. It offers a spring-loaded solution to help return your multipoint lock handles back to their original position after using. There was a time when handles of this kind didn't have a spring built into them, and as a result, they are more likely to slide or drop once the locking mechanism is disengaged. The addition of this simple element is one of the most effective ways to fix this issue and is an effective way to keep your doors made of upvc from becoming stuck in either closed or open position, as they aren't always easy to close manually.

These spring cassettes have been specifically made for use with multipoint locks that are sprung but they won't work with non-sprung multipoint handles. You must have a custom hole cut into your backplate to allow these to fit (please see image for technical diagram). They are a replacement for existing broken or missing cassettes within the backplates of door handles of many brands of uPVC doors. They are available as one unit. They have a square-cut out that is able to accommodate an 8mm shaft.

These spring cassettes are an excellent value for money way to fix the problem of handles on your doors sagging. They are easy to fit and will extend the life span of your uPVC doors. Contact us for more information on our range of uPVC accessories and spares. We are on hand to help and happy to give you professional advice.