11 Methods To Completely Defeat Your Sliding Patio Doors Repair Sliding Patio Doors Repair

Patio doors that slide open are an excellent way to take advantage of your outdoor space, but they can become difficult to open or close. This can be due to a variety of problems, such as dirty tracks or a misaligned slider.

Start by cleaning the track and making sure that the rollers are lubricated. You can also re-align the rollers using adjustment holes that are located on the bottom side of the door panel that can be moved.

Tracks that are damaged or dirty


A sliding door that doesn't slide properly can be due to an unclean or damaged track. Over time dirt, grit and even corrosion can form and stop the track from moving smoothly. The solution is to thoroughly clean with the use of a brush and mild detergent. It is recommended to complete this task on a regular basis to ensure the smooth operation of your door and prevent the need for expensive repairs later on.

A door that is leaky is another common issue that requires prompt attention to avoid water damage, mold growth and structural damage. Most often, the issue is due to damaged weather stripping or doors that are not aligned properly, which can be corrected by replacing the weather stripping and by aligning the door.

Rollers that veer off the track are another problem that is often repaired with a simple DIY work. Find a friend to assist you with this job as the door could be heavy. Sit inside the house and then lean a panel towards you to shift the rollers. Once the panel is lifted off the bottom track, you'll need to set it on sawhorses to prevent it from falling off. Then, loosen the roller's screws and then pry them out with the screwdriver. You can now clean any dirt that is caught between the wheel and the tracks. Clean each wheel using denatured alcohol and an rag, and then reposition the wheels and reattach them to their tracks.

It may be possible to straighten bent track sections using a mallet made of rubber and a piece of wood. If the bent section is located near hinges or has the potential to cause further damage, you should call in a professional.

Rollers that are not aligned

If your sliding door isn't moving as it should it's most likely due to the roller wheels are misaligned with the track. The wheels may be dirty, rusted, or their bearings are worn out. This creates friction between the floor of the door and the track, which causes it to snag or grind when it's closed or opened. This can also cause noises that squeak.

Fortunately it's a simple fix. The wheels are mounted on a bracket which can be adjusted, so you don't have to remove the door. Find the adjustment holes (usually on the opposite side of the frame) and make use of a screwdriver to turn the screws that control the wheels. By turning the screw clockwise, you raise the wheel, whereas turning it counterclockwise will lower it. Continue adjusting the door until it is open and shuts smoothly.

It is important to adjust the wheel prior making adjustments to your latch. To ensure that the lock functions properly the latch hooks need to be aligned with the strike plate. If you don't do this, the latch could open or close when you're not in the room.

Sliding patio door are an investment. Keeping them in good working order will ensure the safety of your family. By addressing common issues like faulty tracks, rollers and handles, you can prevent costly repairs in the future. Contact us for more information about patio doors. We can assess your needs for repair of your sliding patio door and assist you in keeping it in good condition. Our professionals can also assist with any replacement parts that you may need.

Damaged or loosely hung door frame

Doors for sliding patios are a wonderful option for any home. patio door repairs are a practical and attractive alternative to swing-open or hinged patio door options. Like any other hardware item sliding patio doors are prone to be prone to problems in time. Fortunately, most of these issues are easy to repair with a little DIY know-how.

A common issue that affects sliding patio doors is gaps in the frame. This can be caused by many factors, including misaligned rollers or track as well as a damaged or damaged door track or bent door frame. In most cases, the problem is easily solved by taking the doors off and reconnecting the track. It is essential to be cautious not to cause damage to either the frame or track.

In some cases it is necessary to replace the entire track, which is easily done with a universal replacement kit which is available at most major hardware stores. These kits are easy to install and will have your door operating correctly in no time.

Check your sliding door's hardware and frame for signs of wear, such as loose bolts or screws. This is a simple and efficient DIY patio maintenance step that is done using a screwdriver. It is also important to oil the rollers and tracks of your patio door to ensure smooth operation and keep them from wearing out prematurely.

For many homeowners, their patio doors are the main access to their backyard and outdoor living space. They need to be able to function properly to ensure the comfort of their home and provide security. By taking the time to implement these easy maintenance tips, homeowners can prolong the lifespan of their sliding patio doors and minimize expensive repairs or replacements.

A faulty handle

The sliding patio doors are ideal for allowing you to enter your home and gain access to your backyard, but they can become difficult to operate when they become misaligned. A faulty handle may also cause the door to not open or close properly. The good news is that repairing a loose handle is a fairly simple job that can be accomplished at home.

In most cases, a loose handle is merely the result of screws working into the backplate. To remedy this problem, simply tighten the two screws that are on the inside of the handle with the help of a screwdriver. If you find that the handle is still loose, it could be an indication that the threads are worn and need to be replaced.

A damaged latch could be the reason. It is more likely the latch will break if made of metal, instead of plastic. You can try applying lubrication to the latch to see if it's not engaging or turning. If this does not work, you may need to replace the lock.

The handle, in turn, can become difficult to operate when it is damaged or cracked. If this happens, you will have to replace the handle with one that is in line with the style and design of your sliding patio doors.

Whether your patio doors are old and outdated or brand new, Feldco can help you get them back on the right track. We have doors of high-quality in various sizes and styles that can be installed to match your home perfectly. Contact us today to find out more about our doors! We proudly serve homeowners in Southern California, including Ventura County, Orange County & San Diego County.

Faulty weatherstripping

It's time to upgrade your weather stripping if notice light coming from windows and doors, or feel a draft pulling at the window or door. The strips form a tight seal that keeps unwanted insects, air, and water from getting inside your home. It also keeps your conditioned and heated air inside, saving you money on your energy bills all year long.

Based on the age of your weather stripping it may have deflated and lost its bouncy positive seal. It is easy to determine this by taking a dollar bill and running it under the seal between the top of the door frame as well as the at the bottom of the door jamb where the two meet. If the dollar bill slides easily between the seal and door easily, it is time to replace the weatherstripping.

If you only replace the worn-out portion of weather stripping, it could cause future problems with the seal. It's much more effective to replace the entire stripping to ensure that you are able to rest that your door is sealed once again.

For an easy DIY project follow our guide on weather stripping to remove old weather stripping and install the right material to your sliding patio door and frame to create a durable solid, secure seal. This is a great way for you to save money on your energy bills and also fix your sliding patio door. Don't wait until it's too late. Your wallet and your home will be thankful.