What Is Door Handle Replacement And Why Is Everyone Talking About It? Door Handle Replacement

Door handles may seem like an insignificant thing, but if you dislike the style or design of them, or are finding them difficult to use then it's time to replace them. With a little patience, you can install the new handle in no time.

Modern door handles are often equipped with cover plates which hide the screws to give them an attractive appearance. If your new handle doesn't have them already attached, you will have to attach them separately.

Removing the Old Handle

Door handles aren't just an an important aesthetic addition to your home, but they're vital for safety since they let you lock and unlock your door. Over time, the door handle may begin to lose its grip or feel a bit loose. It could also begin to look aged and worn. This is a clear indication that it's time to replace the door handle.

One of the first indications that your door handle is in need of replacing is the fact that it is becoming difficult to operate. This is a serious problem since you won't be able to lock or unlock the door which could put your family and yourself at risk.

It is also an excellent idea to replace the handle on your door in the event that it's damaged or broken. A damaged or broken door handle can be dangerous, particularly for elderly or children members who might struggle to open it. They could become trapped. It's easy to replace a broken handle on a door.

The majority of modern door handles are a standard size, so they are suitable for any door. If you're not certain if your new door handle will work, take out the old one and measure its housing holes. This will enable you to purchase the correct size door handle.

The easiest way to take off the door handle you have been using is to remove it from the door itself. This is usually done with a screw driver. However certain door handles come with a cover plate that conceals the mounting screws, so you'll have to cut off this to reach the screws underneath. Once you've removed your old handle, take note of the way the spindle is positioned to ensure that you can be sure to align it when you install your new one.

You can also remove the door handle by removing the latch mechanism. This is usually done with the screwdriver, but you'll need to locate the small latch, which is located at the edge of the trim piece. After taking off the latch, remove the handle and the strike plate. Then, you can remove the latch from the door's edge.

Remove the Strike Plate

If you are replacing the handle, you'll want to replace the latch plate that holds the hole that the door's latch hooks into when it closes. upvc door handle arrive in will include two options for latch plates - either a rectangular or circular (see the diagram above for the parts of the door handle). If your current latch plate has rectangular in shape, swap it over to the round one, so that the latch is able to hook into the strike plate in a manner that makes the handle easier to operate.

The first step is to remove the screw that is holding the latch plate. The screws are often quite tight and require a bit of force to loosen them. If possible, it may be beneficial to have a second person assist with this part.

The latch plate should be removed from the door once the screws have been removed. If the latch plate is stuck or won't move, use a small hammer to scrape the edges. This will sometimes free the plate up.

Now you can prepare the new strike plate for installation. With the screws made of wood that came with the new handles, screw the latch plate onto the inside of the doorjamb. Be careful not to tighten too much the screws, as this may damage the strike plate.

If you're unsure if the latch plate is in the right position Try closing and then opening the door to check whether it locks and closes correctly. If not you'll need to adjust the strike plate either up or down, or even forward or back, until the door closes and latches properly.

If the door continues to move or jiggles, you might need to increase the size of your latch hole on the strike plate. This is more prevalent for older doors, but could also be caused by wear and tear hinge mortises that are too shallow or not the right size for the latch, or because of a broken or damaged strike plate. If this is the situation, use a metal filing instead of a chisel or hammer to adjust the strike plate.

Take off the Latch

The latch is an angled metal piece that slides into and out of a hole on the inside of your door. When you turn the handle, it pushes the latch forward and allows you to open the door. It also hooks into a hole on the door's frame so that the door stays closed. If your door is wiggles when you close it, replacing the latch could be the only thing needed to correct the issue.

The screws that hold the door latch are hard to spot, but you can usually use a screwdriver to make an insignificant hole on the trim plate and then pry the latch off. After taking off the trim plate you should be able to remove the latch as well as the bolts that hold it, as well as the spindle.

If the latch won't come out, try using a paper clip or a tool to free it from the handle mechanism. Insert the item into the recessed latch slot, and gently twist it or jiggle until the handle and latch begin to break off. You may have to do this several times before the latch comes loose enough to let it out.

You should be able slide the new latch into its slot without problems after you have removed the old one. Make sure the latch is positioned correctly in the slot and is aligned with the screw chambers and then use the new screws to secure it to the strike plate and door frame.

Before installing the new handle, be sure to measure your existing backset (the distance from the center of the big hole on the front surface of the door to the edge). Make sure that the size of the latch of the new handle is equal to the measurement.

You'll require a new cylinder for your lock if replacing the latch and handle or your existing one is damaged. If you're not changing locks the new lock should fit inside the recess you have already installed, and will work with the keys you have already. Choose a latch that has rectangular cover plates that match your existing handles.

Then remove the Cover Plate


You can replace your door handles with a modern rose and lever designs to make a difference in the appearance of your house. You can purchase complete sets that include escutcheons, privacy adaptors and escutcheons.

To replace an internal door handle remove the cover plate (or rose), which protects the screws and the inner mechanism. Find an release tab on the plate, and use a flathead screwdriver to lift it off the knob. It may have an opening on one side or be secured by pins.

Remove the screw that is holding the handle inside and place it aside when the cover plate is removed. Take off the screws that hold both the outer and inner plates. You can loosen them using the help of a Philips Screwdriver. Then, remove the inner plates and latch plate from the door and set them aside.

Most doors have gaps between the jamb of the door and the edge of the frame, which allows for a handle, however not all have. If yours doesn't, you will need to make a hole through the door. The process for doing this is similar to the procedure for opening a door with a lock, but you'll need to take extra care to avoid damaging the frame or door.

Installing new door knob screws is necessary after the holes have been drilled. Purchase the same size as your old screws to ensure that you don't get the handle that is too loose or tight. Installing a new strike rod and latch is also mandatory. They aren't included in the majority of door handle sets.

If you're looking for a quality replacement interior door handle set Try the Amazon's Choice FAERSI two-piece chrome finish handle set. It is a factory-fit and has received hundreds of 5-star reviews. It's a great choice to replace damaged or worn interior door handle hardware on your Chevy HHR.