10 Things Competitors Learn About Double Glazed Window Repair Double Glazed Window Repair

It's worth checking the warranty included with the majority of double-glazed windows. Generally, it includes any problems with the window hardware - hinges and locking mechanisms - in the first 10 years.

Mist between the glass windows is usually caused by a breach in the seal, and it's something that requires immediate repair to stop damp or mould developing in your property.

Condensation Between the Windows

If condensation develops between the windows in your home, it is an indicator that the seal securing the insulating gas between the panes has failed. This is a serious problem that should be addressed immediately, especially during winter, when humidity levels are at their highest. It can also cause damage to the sills and sealant, and even mould or mildew.

Ideally double-glazed windows should not be able to experience condensation between the panes. This can be caused by high humidity or a very cold snap. Fortunately, this issue is repaired without replacing the entire window. A professional can make tiny holes in the window and then spray a special cleaning solution inside. The water is then removed from the window. Additionally, an anti-fogger can be installed to prevent the accumulation of moisture from happening again.

Condensation can also happen between the windows as a result of air leakage, or other causes outside the window. In this case it can take a longer time for moisture in the window to build up, because the air must be sufficiently warm to vaporise the water molecules. In these instances, it may be better to replace the double-glazed windows rather than repair the seals on the existing units.

A double-glazed windows is made consisting of two or three pieces of insulated glass held together by a frame made of metal. The gap between the two of the window is filled with a non-toxic insulating gas like argon or krypton, and then sealed. The seal is responsible for preventing the insulating gas from escaping and also prevents air and moisture from getting into the gap.

As windows age, seals get damaged and allow moisture to escape between the glass panes. It is crucial to recognize when the seals are leaking and this means that the double glazing isn't performing as well as it once was. This can result in poor energy efficiency, a rise in heating bills, damage to the property and the risk of condensation between the windows.

Mist

If you notice condensation on the outside of your windows, this is totally normal - it indicates that your double glazing is functioning properly and retaining the heat inside your home. The condensation forms because the air outside is warmer than the glass and reaches its dew point before the window. Double glazing that is of the highest quality is a fantastic method to accomplish this.

If you see condensation on the inside of the window, this could be a sign of an issue with ventilation in your home. The excess moisture can't be absorbed and end in the carpets, windows furniture, and other areas of your home. This can be prevented by having it checked out by a professional and ensuring that there is plenty of fresh air in the house.

Another reason for mist on double-glazed windows is because the seal between two glass panes has broken. This could be due wear and tear or chemical cleaning products that are being used. The best thing to do is fix the windows in the shortest time possible.

Repairing your windows professionally will ensure they remain waterproof and free of fogging, condensation and misting. It's also cheaper than replacing your windows and you will save money on your energy bill.

A FENSA certified window installer can provide you with a cost estimate for repair or replacement of your double glazed windows. Upgrade your old windows to energy-efficient A-rated ones in the event that they are extremely old.

It is best to keep copies of any agreements and warranties with the window installers. This can be extremely helpful in the event that any issues with your windows occur in the future, and you are able to then contact your installers to resolve the issue. This is a better option than ignoring the issue which could cause further problems in your home.

Close or open without difficulty

If double-glazed windows become difficult to open and close it's not just a nuisance and can result in higher energy bills because of the loss of heat and draughts. It could also be security risks, particularly when the locks aren't functioning correctly. It is recommended to fix double-glazed windows and doors as soon as possible.

If you've attempted to open your window using the most basic methods, like using a screwdriver or tapping the frame with a solid object, the problem could be more serious. It could be that the window is sagging within its frame and requires to be re-set or it could be that there is a gap between the glass panes and frames. In RepairMyWindowsAndDoors should contact a double glazing repair specialist to ensure the repairs are done properly and to prevent any further problems.

It's not unusual to find UPVC window handle and lock mechanisms to become difficult to operate or become stuck particularly when they're old and worn. It is usually caused by an accumulation of dirt or grease inside the handle. This is easily fixed by cleaning it with a uPVC cleanser. If this doesn't help, you could try gently tapping the uPVC frame using a hard object, such as an screwdriver, but be careful not to harm the handle or the mechanism for window handles.

If this doesn't resolve the problem then the window may have to be replaced as it is likely that the hinges aren't properly aligned, or the locking mechanisms are damaged. In this situation, you should contact a UPVC window specialist.

David The Window Wizard specialises in all technical aspects of double glazed window and door repair, including fixing a jammed or locked shut double glazed window. He has a wealth of experience changing old window mechanisms to modern ones and can often save you the expense of replacing the whole window. For more information or to schedule an estimate, call or email us today.

Warping

Double glazed windows are often a great option for saving energy in the home. They consist of two separate panes that have a spacer, air or dense gas between the panes, which creates a seal to keep cold air out and warm air in. However, over time windows can become damaged or break and require repair. Fortunately, the majority of these repairs are easy and can be accomplished without the cost of replacing the entire window.

A common issue that double-glazed windows face is warping. The windows begin to bow, bend or twist, which can impact the strength of the window and its ability to insulate. Double-glazed windows should be installed correctly and maintained regularly to avoid this problem.


Contact a specialist immediately if you notice that your double-glazed windows are warping. This will help keep the issue from getting worse. They will be able to inspect your windows to determine the cause. They will use special tools to fix your issue and ensure that your windows are completely sealed.

Water vapour can trigger this issue, since it can accumulate between the windows over time. This can be caused many different reasons like humidity, weather conditions and temperature fluctuations. To resolve this issue the expert will make tiny holes in the window to release the moisture. The specialist will use a cleaning agent on the glass to cleanse it, and then apply sealant.

If your windows cannot be opened or shut, it could be due to a malfunctioning mechanism or hinges. Before calling a professional to address the issue, it's worth lubricating these parts. This will usually resolve the issue and decrease your need for replacements. If your windows are old or don't offer the insulation you want, it may be better to replace them.