10 Things We Do Not Like About Repairs To Upvc Windows Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they do not corrosion or rot.

It is essential to clean and oil UPVC windows and doors regularly. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and even be fatal. It is essential to make sure that your windows are in good condition.

For single pane windows, it is fairly easy to replace windows, and the new one will generally fit within the old frame very easily. However If windows with double panes are secured by internal beading, it will be more difficult to get rid of the existing panes and install new ones. In this situation it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall onto the fabric, not onto the floor, where they could be trampled.

After the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional can come out and fix the window. It also acts as a barrier that will prevent any intruders from gaining entry into your home. If the distance between the door and the window is substantial, you may need to consider an alarm system that has windows. This will give you the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can be affected by a variety of issues such as sliding. A sagging uPVC window can cause issues with light, draughts and even security. It's crucial to act as soon as you discover that your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window which is sliding. You'll first need to open the windows to reach the frame. With the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit of the window, you can tighten screws to hold them in the right position.

If you aren't able to move the hinges you may require replacing the seal. Over time, rubber seals lose their elasticity and dry out and cause them to lose tightness. It is important to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. The majority of the time this is due to screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and then perform an experiment fit. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, it is important that you take action. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is a relatively easy fix and should be undertaken by any DIY expert. Based on the severity of the problem the caulking used previously may need to be removed before a new layer of caulk is applied. When it comes to uPVC repair, it is important to be careful not to over-caulk. This can make your window harder to clean and lower its energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to note that if the leak is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.


4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open with ease It could be the hinges that are at fault. They can be easily repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It's easy to change a window hinge but it's much easier if someone else helps you hold the frame.

Verify that the uPVC hinges are open and closed in the proper direction. Look for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a particular way or due to inadequate installation at the factory. Sending us a picture through our website can often solve the issue. We are always happy to give suggestions.

Regular lubrication of hinges is also essential. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It also helps prevent corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges, also because of wear and tear, could become misaligned. This will cause a gap to form where the sash joins the frame. If they are beyond repair, it may be necessary to have them realigned. The interlock, which is located on the hinge of the window, can be misaligned. Again, it is possible to just give them a good clean, but in some instances it could be necessary to have these replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will lessen draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler which can be hung over your window sill. These will help to keep cold air out and keep your home warm and cozy!

Your windows made of upvc will continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it could be more cost-effective to replace them rather than repair them. If window repair near me have any problems with your upvc window it is recommended to speak with a professional as soon as possible.