You're About To Expand Your Window Repair Options Window Repair - Common Problems That Require Professional Attention

If a window is broken, cracked or is missing completely, it usually requires professional attention. It is difficult for DIYers to not create more problems by repairing damaged glass.

Start by identifying the issue. Get your tools ready and prepare the area for work and take the necessary safety precautions. Preparing for the window repair project in advance can help you save money and lessen frustration.

Broken Panes

A baseball that is thrown in error or a pebble that is thrown from the lawnmower or bird flying into glass can damage it. The windows you have may require professional repair or replacement depending on the type of glass and the way it was installed. Window replacement is a major project that requires the removal of the sash (the part of the window which holds the panes) from the frame. You'll need a contractor who has experience in the process and the appropriate window in stock prior to starting work. A qualified contractor will remove and replace the existing IGU. They will also rebuild the window sash and replace the casing.

If you are replacing just one window pane, the initial step is to remove all glass shards from the area surrounding the broken piece. upvc windows repairs near me will also need to remove the glazing compound and metal glazing points that held the old pane in place. Wear gloves and safety goggles when doing this; small glass chips could cause permanent eye damage. It is possible to use heat guns to soften the old glue so you can scrape it off using the blade of a utility knife.

After taking off the old pane of glass Measure the opening, then transfer the measurements to the new window. Make sure to subtract 1/8 inch (or quarter inches) from the width and height of the frame to account for expansion and contraction. Cover the new frame with either silicone caulk or traditional glazing putty.

Place the new pane in the window, and then apply a bead of caulk to seal the gap between the frame and the glass. Allow the caulk to dry before putting the sash back into the frame and nailing it in place. Paint the frame to hide the nails and to give it a neat and clean appearance. If you need assistance with to replace a window pane and you are in need of an experienced glass company in your area for a price. A certified, skilled professional will be able to safely manage the job and ensure that your windows are shielded from the elements.

Broken Seals

A window seal is designed to create an air barrier between your home's indoor air and outside air which reduces energy transfer while keeping your indoor air warmer. However, these seals may become damaged in time due to problems like fluctuating temperatures or humidity. The most obvious sign that your window seals have failed is the appearance of condensation or fogginess that is not able to be removed either from the outside or inside of your windows.

Fortunately, window seals can be repaired the ease of an experienced window company. A window repair service can usually finish the job in an hour or less. To repair a damaged window seal, the window repair service will fog the windows, fill the void with Krypton gas or argon to insulate and then reseal the glass unit, but without allowing gas to escape.

Once your windows have been sealed, they will provide the same insulating benefit that they did before becoming foggy. However, you might be noticing that your windows are a bit more difficult to open and close than they were before. While this is a minor issue, it could be a sign that the sash of your windows also requires repair or replacement.


If your windows are under warranty, it's always worth contacting the manufacturer to inquire the possibility of a replacement. Depending on the quality of your windows, you may be able to receive an entirely new IGU (insulated glass unit) for free to you.

If the seals on your windows are failing and you're thinking whether to replace or repair your windows, the best option is usually to replace them. This will prevent the problem from happening again in the future, saving you time and money on costly repairs in the long in the long run. Replace your existing windows with double or triple pane windows to increase your insulation in your home. Additionally, the newer windows are more environmentally green than the older single pane windows.

Rotting Wood

Wood that is rotting on the sill frame or mullions can not only be unsightly however, it can also cause structural damage. A professional carpenter will be adept at quickly and effectively repair rotting wooden frames. The most important task is to find and eliminate the source of moisture.

This may require you to carefully inspect the exterior of your home. Examine the wood for signs that it is in contact with dirt, masonry or drip caps. Look for signs of excessive moisture, such as peeling or blistering paint, a darker appearance, and algae growing green on top of the wood. Also, be sure to examine floors, floor beams, joints and framing to see if the wood has started to decay.

A fungus called Dry Rot can attack wood and eat it up from the inside out. While this condition is not as destructive as wet rot, it can still cause serious issues. It also can contaminate and weaken other materials that come into contact with the affected wood, such as mortar, cement and concrete.

Dry Rot can be treated using epoxy resins, which makes the wood stronger and more durable. The product is available in two forms: penetrants or fillers. The penetrants are high-strength adhesive putty that is no-shrink that can be used to strengthen and rebuild rotted or severely damaged wood and other materials used in structures, walls, floors furniture, sculptures columns, and other structures. It is a hard and durable material that is not affected by water and insects.

The fillers, which are a high-strength, non-shrink, adhesive paste, can be used to fill gaps or holes. They are easy to use, however precision is crucial. It is advised that the area be cleaned prior to application to eliminate any splinters or slender fragments of decayed wood. it is recommended to prime the area before applying the epoxy to ensure the proper adhesion.

In certain situations, a large area of wood that is rotten is so bad that it's required to replace the window. A professional can evaluate the situation and offer advice.

Refusal to Open

A window that isn't opening is a frustrating issue. It's not only inconvenient but also dangerous when someone needs to escape from an unburned building or simply need to get some fresh air. The majority of windows that are difficult or impossible to open can be repaired by following some troubleshooting tips.

Examine for grime and dirt if your single-hung or double-hung windows won't close or open. Over time dust and dirt will accumulate in the window frame, and cause friction, which can make it difficult to move the sash. This issue can be resolved by cleaning the windows and applying an oil on them.

Another common cause of sticking windows is moisture. As time passes, wood begins to absorb moisture and swell. This can lead to cracks, rotting and warping. Moisture can also harm paint, which can cause the frame to move out of alignment. This can cause the window channels to not line up with the window, making it difficult to fully open or close the window.

If lubricating the hinges and replacing stripped screws doesn't solve the problem, it may be time to contact professionals for window repair. This is a more complicated process, and requires the removal of the window sash. This is typically only recommended for those who are accustomed to working with power tools. If the window is damaged and needs to be replaced entirely. Depending on the type of window and degree of damage, it might be required to replace all the windows in your home. A professional can assist you in deciding which option is best for your home.