A Trip Back In Time What People Said About Peugeot 208 Key Replacement 20 Years Ago Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot 308 key fob stopped working for a while it could be due to a dead battery in the coin or water damage or receiver module issues, or a damaged electronic chip. These are all simple fixes that can bring your car back to speed in no time!

peugeot keys of the key can get worn out and result in a malfunctioning car key. It is easy to fix if you visit your local Car Key Man Auto Locksmith and let them put in the new blade for you.

Battery

The key fob inside your Peugeot 308 may die or become weak enough to not send a strong signal. This could cause the key fob's function to cease, preventing you from locking or opening the doors or starting your engine. To fix this, you'll need to replace the battery inside your key fob.

You'll need a replacement battery from an auto parts shop or your local hardware store. Make sure that the battery is brand new and not sitting on the shelf too long. A new battery has more capacity and will transmit a stronger signal to your car.

After replacing the battery try unlocking the doors and locking them using the key fob. If the doors aren't unlocking it's likely that the issue lies with the car's receiver module, which can be reprogrammed by your local Peugeot dealer.

It's also possible that the chip inside your key fob has been damaged. This could happen if drop your key fob on the ground or expose it to water. The rubber seals that shield the chip from moisture might wear down over time, particularly if the key fob is exposed to water for prolonged durations, like submerging it in the ocean at the beach. To avoid this it is recommended to keep your key fob out of water and out of water.

Water Damage

Don't lose hope on your key fob if it becomes wet, whether you slipped into a pool or fumbled into a pool. While the key fob has rubber seals that should protect it from water, prolonged exposure to water may cause damage to the electronic chip. Since water is an excellent conductor, any water that makes it inside the key fob could cause a series of short circuits that eventually destroy the chip. After removing the batteries clean the contact surfaces with isopropyl and then dry them completely before putting them back into.

Your Peugeot 308 may not start due to the battery being dead. If you have an extra car, jumper cables could be used to start the engine again. If the battery is the problem the battery will need to be replaced.

A malfunctioning receiver in the car could also block it from receiving the signal from the key fob. The key fob may be damaged or there could be a problem with the antenna, wiring or key fob itself. If you are using a new key fob it may require to be programmed into the vehicle. If you cannot fix the issue on your own then contact an expert technician. A trained technician in the field will be able diagnose the problem quickly, and resolve it quickly.

Radio Interference

Signs like key fob not being recognized or having a restricted range typically indicate that there is an interference in the system. This is either radiated or conducted, with the former being caused by power supply cables or speaker wiring that is too close to electrical components. In general, rerouting cables and moving them away from these components can solve the problem.


It's unlikely someone is watching your key fob signal in the intention of stealing your vehicle or vehicle, but it's possible that radio interference has drowned out the signal. Fortunately, this is easy to fix.

If you are having key fob not being recognized, try using a fresh battery. Also, ensure that the battery you are using is the right size and type. Incorrectly sized batteries can damage the fob.

Certain alarm systems and radar detectors operate on the same radio frequency as your key fob, and could cause them to interfere with your key signals. It is best to avoid attaching these devices to your key fob.

Pairing Issues

A car's remote keyless entry system contains a receiver that receives radio frequency signals from the key fob. You won't be able to start your vehicle if this receiver isn't working even if the key fob is functioning and can be reprogrammed. This issue can be caused by a variety of ways, including a dead battery in the coin-cell, or water damage. The receiver may also be malfunctioning due an internal or software issue or damage to the key itself.

One of the most common reasons why your Peugeot 308 key fob isn't working is that the battery inside has died. The battery can be replaced, however you must ensure that it's the proper battery for your keyfob. It is best to use an item that has the same size, voltage, and specification as the original.

Another reason that your Peugeot 308 key fob might not be working is because it is paired with a different car. This can happen if have given your key fob to a person you know or it has been used to unlock or start other vehicles. This can be resolved by reprogramming the key fob using an OBDII scanner. This tool will ask for information about your car, for example, its VIN or engine type. It is vital to enter the correct details.