almost 2 years ago

Rustoleum "Filler Primer"

I actually have heard some of you speak approximately the filler Rustoleum Filler Primer, so I determined to choose a few up and attempt it.

After four coats 15 mins apart, then a few 220+three hundred grit, I am greater than stunned at how nicely it covers the seam of mdf b-u-t-t joints. Before I sanded it I said, yup some other joke, can nevertheless see the seams as though there has been not anything on them. Then I sanded it, wow, it included and stuffed as lots as a great bondo job-with out the mess and time. This stuff is surely excessive construct, and won't be innovative to lots of you with appropriate paint experience, however I am thrilled as may be for $four.

My query is, do any of you've got got long time information of this stuff? Does is preserve up nicely, and preserve paint nicely? Being that it is going on thick, I marvel approximately the durability. Any enter might be lots liked earlier than I cross spray five shelves with this stuff!

Also Read: Septic Clean Out

About Filler Primer Spray

Rust-Oleum® Filler Primer is a hi-construct components that fills in minor imperfections withinside the floor and improves pinnacle coat adhesion and appearance. For use on metal, wooden and fiberglass surfaces.

• Hi-construct components
• Fills in imperfections
• Stops Rust components
• Any-Angle Spray with Comfort Tip

How Long Should Rustoleum Primer Dry Before Painting?

Dry and recoat instances are primarily based totally on 70°F (21°C) and 50% relative humidity. Allow greater time at cooler temperatures. Dries to touch in 15-half-hour and dries to deal with in 1-2 hours and is completely dry in forty eight hours. Apply a 2nd coat or pinnacle coat inside 1 hour or after forty eight hours.

Also Read: Mid Century Modern Paint Colors

Should You Brush or Roll on Primer?

Applying primer first is the first-rate manner to make certain a great end later. Just because it does with make-up and on cars, primer creates a clean base that promotes higher adhesion and more true shadeation out of your topcoat paint. Pro-tip: Apply primer the usage of a broom first to “reduce in" round edges, then use a curler to fill in.

How Many Coats of Rustoleum Primer?

Apply 2-three coats permitting five-10 mins of dry time among coats. For first-rate outcomes permit Primer to dry for 1 hour earlier than dry sanding. Test in an not easily seen vicinity to make certain Primer is dry sufficient for sanding.

Also Read: Septic Alarm Going Off