Forums » Discussions » Valid NSE7_EFW-6.4 Exam Syllabus - Valid Fortinet Fortinet NSE 7 - Enterprise Firewall 6.4 - Pass NSE7_EFW-6.4 Test

gywudosu
Avatar

P.S. Free 2023 Fortinet NSE7EFW-6.4 dumps are available on Google Drive shared by Real4Prep: https://drive.google.com/open?id=1GeAzN9MnUCKsjbvpM8OpUKxbsg3dA-d7 There are three formats of the NSE7EFW-6.4 practice training material for your preparation. You can choose as your needs. The first one is the pdf files: NSE7EFW-6.4 pdf dumps can be printed into papers which is very suitable for making notes. The NSE7EFW-6.4 PC test engine & NSE7EFW-6.4 online test engine are all VCE format and can simulate the actual test environment. The <a href="https://www.real4prep.com/NSE7EFW-6.4-exam.html">NSE7EFW-6.4 PC test engine is suitable for any windows system, while the NSE7EFW-6.4 online test engine can be installed on any electronic device. All the NSE7_EFW-6.4 exam content are the same and valid for different formats.

Fortinet NSE7_EFW-6.4 Exam Syllabus Topics:

Topic Details
Topic 1
  • Central management and analysis using FortiManager and FortiAnalyzer
  • Autodiscovery VPN (ADVPN)

Topic 2
  • Intrusion Prevention System (IPS)
  • Content inspection
  • FortiOS architecture

Topic 3
  • Dynamic routing: OSPF, Border Gateway Protocol (BGP)
  • System and session troubleshooting

Topic 4
  • Implement the Fortinet Security Fabric
  • Perform initial configuration

Topic 5
  • Traffic and session monitoring
  • Routing and Layer 2 switching


>> Valid NSE7_EFW-6.4 Exam Syllabus <<

Free PDF 2023 Fortinet NSE7_EFW-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 –Unparalleled Valid Exam Syllabus

Even though our NSE7EFW-6.4 training materials have received quick sale all around the world, in order to help as many candidates for the exam as possible to pass the NSE7EFW-6.4 exam, we still keep the most favorable price for our best NSE7EFW-6.4 test prep. In addition, if you keep a close eye on our website you will find that we will provide discount in some important festivals, we can assure you that you can use the least amount of money to buy the best product in here. We aim at providing the best <a href="https://www.real4prep.com/NSE7EFW-6.4-exam.html">NSE7_EFW-6.4 Exam Engine for our customers and at trying our best to get your satisfaction.

Fortinet NSE 7 - Enterprise Firewall 6.4 Sample Questions (Q34-Q39):

NEW QUESTION # 34
What events are recorded in the crashlogs of a FortiGate device? (Choose two.)

  • A. System entering to and leaving from the proxy conserve mode.
  • B. Configuration changes.
  • C. A process crash.
  • D. Changes in the status of any of the FortiGuard licenses.

Answer: A,C Explanation:
Explanation
diagnose debug crashlog read
275: 2014-08-05 13:03:53 proxy=acceptor service=imap session fail mode=activated276: 2014-08-05
13:03:53 proxy=acceptor service=ftp session fail mode=activated277: 2014-08-05 13:03:53 proxy=acceptorservice=nntp session fail mode=activated278: 2014-08-06 11:05:47 service=kernel conserve=on free="45034 pages" red="45874 pages" msg="Kernel279: 2014-08-06 11:05:47 enters conserve mode"280: 2014-08-06 13:07:16 service=kernel conserve=exit free="86704 pages" green="68811 pages"281: 2014-08-06 13:07:16 msg="Kernel leaves conserve mode"282: 2014-08-06
13:07:16 proxy=imd sysconserve=exited total=1008 free=349 marginenter=201283: 2014-08-06 13:07:16 marginexit=302
NEW QUESTION # 35
View the exhibit, which contains the output of a debug command, and then answer the question below.

Which one of the following statements about this FortiGate is correct?

  • A. It is currently in memory conserve mode because of high memory usage.
  • B. It is currently in proxy conserve mode because of high memory usage.
  • C. It is currently in system conserve mode because of high CPU usage.
  • D. It is currently in extreme conserve mode because of high memory usage.

Answer: A
NEW QUESTION # 36
Examine the IPsec configuration shown in the exhibit; then answer the question below.

An administrator wants to monitor the VPN by enabling the IKE real time debug using these commands:
diagnose vpn ike log-filter src-addr4 10.0.10.1
diagnose debug application ike -1
diagnose debug enable
The VPN is currently up, there is no traffic crossing the tunnel and DPD packets are being interchanged between both IPsec gateways. However, the IKE real time debug does NOT show any output. Why isn't there any output?

  • A. The IKE real time shows the phases 1 and 2 negotiations only. It does not show any more output once the tunnel is up.
  • B. The IKE real time debug shows error messages only. If it does not provide any output, it indicates that the tunnel is operating normally.
  • C. The log-filter setting is set incorrectly. The VPN's traffic does not match this filter.
  • D. The IKE real time debug shows the phase 1 negotiation only. For information after that, the administrator must use the IPsec real time debug instead: diagnose debug application ipsec -1.

Answer: C
NEW QUESTION # 37
View the following FortiGate configuration.

All traffic to the Internet currently egresses from port1. The exhibit shows partial session information for Internet traffic from a user on the internal network:

If the priority on route ID 1 were changed from 5 to 20, what would happen to traffic matching that user's session?

  • A. The session would be deleted, so the client would need to start a new session.
  • B. The session would remain in the session table, and its traffic would still egress from port1.
  • C. The session would remain in the session table, and its traffic would start to egress from port2.
  • D. The session would remain in the session table, but its traffic would now egress from both port1 and port2.

Answer: B Explanation:
http://kb.fortinet.com/kb/documentLink.do?externalID=FD40943
NEW QUESTION # 38
An administrator has configured two FortiGate devices for an HA cluster. While testing HA failover, the administrator notices that some of the switches in the network continue to send traffic to the former primary device. The administrator decides to enable the setting link-failed-signal to fix the problem.
Which statement about this setting is true?

  • A. It disabled all the non-heartbeat interfaces in all HA members for two seconds after a failover.
  • B. It sends an ARP packet to all connected devices, indicating that the HA virtual MAC address is reachable through a new master after a failover.
  • C. It sends a link failed signal to all connected devices.
  • D. It forces the former primary device to shut down all its non-heartbeat interfaces for one second, while the failover occurs.

Answer: D
NEW QUESTION # 39
...... You must be curious about your exercises after submitting to the system of our NSE7EFW-6.4 study materials. Now, we have designed an automatic analysis programs to facilitate your study. You will soon get your learning report without delay. Not only can you review what you have done yesterday on the online engine of the NSE7EFW-6.4 study materials, but also can find your wrong answers and mark them clearly. So your error can be corrected quickly. Then you are able to learn new knowledge of the NSE7EFW-6.4 Study Materials. Day by day, your ability will be elevated greatly. Intelligent learning helper can relieve your heavy burden. Our NSE7EFW-6.4 study materials deserve your purchasing. If you are always waiting and do not action, you will never grow up. Pass NSE7_EFW-6.4 Test: https://www.real4prep.com/NSE7_EFW-6.4-exam.html BONUS!!! Download part of Real4Prep NSE7_EFW-6.4 dumps for free: https://drive.google.com/open?id=1GeAzN9MnUCKsjbvpM8OpUKxbsg3dA-d7