Forums » Discussions » Test Fortinet NSE7_EFW-7.0 Prep | NSE7_EFW-7.0 Valid Exam Experience

gywudosu
Avatar

BONUS!!! Download part of TestkingPDF NSE7EFW-7.0 dumps for free: https://drive.google.com/open?id=1R4tGxfST0Ynwnr1OgicVxnZfQwaQiIrX Possessing Fortinet certification will be a standard to test IT workers' qualifications. NSE7EFW-7.0 reliable exam preparation will be a key to a certification. If you want to apply for a senior management position, one certification will be an outstanding advantage. I advise people pass exams and get certifications with NSE7_EFW-7.0 Reliable Exam Preparation as soon as possible so that you will be one step ahead while facing better job opportunities.

Fortinet NSE7_EFW-7.0 Exam Syllabus Topics:

Topic Details
Topic 1
  • Troubleshoot Border Gateway Protocol (BGP) routing for enterprise traffic
  • Implement the Fortinet Security Fabric
Topic 2
  • Troubleshoot different operation modes for a FGCP HA cluster
  • Troubleshoot web filtering issues
Topic 3
  • Troubleshoot Autodiscovery VPN (ADVPN) to enable on-demand VPN tunnels between sites
  • Troubleshoot central management issues

>> Test Fortinet NSE7_EFW-7.0 Prep <<

100% Pass Accurate Fortinet - NSE7_EFW-7.0 - Test Fortinet NSE 7 - Enterprise Firewall 7.0 Prep

We provide our candidates with valid NSE7EFW-7.0 vce dumps and the most reliable pass guide for the certification exam. Our IT professionals written the latest NSE7EFW-7.0 test questions based on the requirement of the certification center, as well as the study materials and test content. By using our online training, you may rest assured that you grasp the key points of NSE7_EFW-7.0 Dumps Torrent for the practice test.

Fortinet NSE 7 - Enterprise Firewall 7.0 Sample Questions (Q28-Q33):

NEW QUESTION # 28
Refer to the exhibit, which contains partial output from an IKE real-time debug.

Based on the debug output, which phase 1 setting is enabled in the configuration of this VPN?

  • A. auto-discovery-receiver
  • B. auto-discovery-sender
  • C. auto-discovery-forwarder
  • D. auto-discovery-shortcut

Answer: A
NEW QUESTION # 29
Examine the following partial outputs from two routing debug commands; then answer the question below.
# get router info kernel
tab=254 vf=0 scope=0type=1 proto=11 prio=0 0.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0 gwy=10.200.1.254 dev=2(port1)
tab=254 vf=0 scope=0type=1 proto=11 prio=10 0.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0 gwy=10.200.2.254 dev=3(port2)
tab=254 vf=0 scope=253type=1 proto=2 prio=0 0.0.0.0/0.0.0.0/.->10.0.1.0/24 pref=10.0.1.254 gwy=0.0.0.0 dev=4(port3)
# get router info routing-table all s*0.0.0.0/0 [10/0] via 10.200.1.254, portl [10/0] via 10.200.2.254, port2, [10/0] dO.0.1.0/24 is directly connected, port3 dO.200.1.0/24 is directly connected, portl d0.200.2.0/24 is directly connected, port2
Which outbound interface or interfaces will be used by this FortiGate to route web traffic from internal users to the Internet?

  • A. Both portl and port2.
  • B. port!
  • C. port3.
  • D. port2.

Answer: A
NEW QUESTION # 30
Which two statements about OCVPN are true? (Choose two.)

  • A. OCVPN supports static and dynamic IPs in WAN interface.
  • B. FortiGate devices under different FortiCare accounts can be used to form OCVPN.
  • C. OCVPN offers only Hub-Spoke VPNs.
  • D. Only root vdom supports OCVPN.

Answer: A,D
NEW QUESTION # 31
View the exhibit, which contains the output of a BGP debug command, and then answer the question below.

Which of the following statements about the exhibit are true? (Choose two.)

  • A. For the peer 10.125.0.60, the BGP state of is Established.
  • B. The local BGP peer has received a total of three BGP prefixes.
  • C. Since the BGP counters were last reset, the BGP peer 10.200.3.1 has never been down.
  • D. The local BGP peer has not established a TCP session to the BGP peer 10.200.3.1.

Answer: A,D
NEW QUESTION # 32
An administrator has configured a dial-up IPsec VPN with one phase 2, extended authentication (XAuth) and IKE mode configuration.
The administrator has also enabled the IKE real time debug:
diagnose debug application ike-1
diagnose debug enable
In which order is each step and phase displayed in the debug output each time a new dial-up user is connecting to the VPN?

  • A. Phase1; IKE mode configuration; XAuth; phase 2.
  • B. Phase1; XAuth; phase 2; IKE mode configuration.
  • C. Phase1; IKE mode configuration; phase 2; XAuth.
  • D. Phase1; XAuth; IKE mode configuration; phase2.

Answer: D
NEW QUESTION # 33
...... Our NSE7EFW-7.0 study materials have won many people’s strong support. And our NSE7EFW-7.0 learning quiz is famous all over the world. Now, our loyal customers have gained wealth and respect with the guidance of our NSE7EFW-7.0 learning materials. At the same time, the price is not so high. You totally can afford them. Do not make excuses for your laziness. Please take immediate actions. Our <a href="https://www.testkingpdf.com/NSE7EFW-7.0-testking-pdf-torrent.html">NSE7EFW-7.0 Study Guide is extremely superior. **NSE7EFW-7.0 Valid Exam Experience**: https://www.testkingpdf.com/NSE7_EFW-7.0-testking-pdf-torrent.html DOWNLOAD the newest TestkingPDF NSE7_EFW-7.0 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1R4tGxfST0Ynwnr1OgicVxnZfQwaQiIrX