Forums » Discussions » Professional-Cloud-Network-Engineer Reliable Test Question - Exam Professional-Cloud-Network-Engineer Demo

gywudosu
Avatar

2023 Latest Test4Engine Professional-Cloud-Network-Engineer PDF Dumps and Professional-Cloud-Network-Engineer Exam Engine Free Share: https://drive.google.com/open?id=14ZggXvKJDXRmy3D75PP2zf58ysoBiMUJ No matter the worker generation or students, they are busy in dealing with other affairs, so spending much time on a Professional-Cloud-Network-Engineer exam may make a disturb between their work and life. However if you buy our Professional-Cloud-Network-Engineer exam engine, you just only need to spend 20-30 hours to practice training material and then you can feel secure to participate in this exam. We can make sure the short time on Professional-Cloud-Network-Engineer training engine is enough for you to achieve the most outstanding result.

How to study the Google Professional Cloud Network Engineer Exam

Preparation of certification exams could be covered with two resource types . The first one are the study guides, reference books and study forums that are elaborated and appropriate for building information from ground up. Apart from them video tutorials and lectures are a good option to ease the pain of through study and are relatively make the study process more interesting nonetheless these demand time and concentration from the learner. Smart candidates who wish to create a solid foundation altogether examination topics and connected technologies typically mix video lectures with study guides to reap the advantages of each but practice exams or practice exam engines is one important study tool which goes typically unnoted by most candidates. Practice exams are designed with our experts to make exam prospects test their knowledge on skills attained in course, as well as prospects become comfortable and familiar with the real exam environment.Statistics have indicated exam anxiety plays much bigger role of students failure in exam than the fear of the unknown. Test4Engine expert team recommends preparing some notes on these topics along with it don't forget to practice Google Professional Cloud Network Engineer Exam exam dumps which had been written by our expert team, each of these can assist you loads to clear this exam with excellent marks.

Conclusion

Your chances to pass the Google Professional Cloud Network Engineer certification exam are higher if you follow an organized training routine. Thus, you can choose from different preparation resources found online. For example, you can start with the learning path provided by Google and get exposed to different areas dedicated to the Google Cloud platform and network processes. Also, you can complete your knowledge with the study guides and books available on Amazon. In all, with the comprehensive materials, we’ve covered above, you’ll easily clear the upcoming validation. >> Professional-Cloud-Network-Engineer Reliable Test Question <<

100% Pass Quiz Google - Useful Professional-Cloud-Network-Engineer - Google Cloud Certified - Professional Cloud Network Engineer Reliable Test Question

Although our company has designed the best and most suitable Professional-Cloud-Network-Engineer learn prep, we also do not stop our step to do research about the study materials. All experts and professors of our company have been trying their best to persist in innovate and developing the Professional-Cloud-Network-Engineer test training materials all the time in order to provide the best products for all people and keep competitive in the global market. We believe that the study materials will keep the top selling products. We sincerely hope that you can pay more attention to our Professional-Cloud-Network-Engineer study questions.

Google Cloud Certified - Professional Cloud Network Engineer Sample Questions (Q142-Q147):

NEW QUESTION # 142
One instance in your VPC is configured to run with a private IP address only. You want to ensure that even if this instance is deleted, its current private IP address will not be automatically assigned to a different instance.
In the GCP Console, what should you do?

  • A. Change the instance's current internal IP address to static.
  • B. Assign a new reserved internal IP address to the instance.
  • C. Add custom metadata to the instance with key internal-address and value reserved.
  • D. Assign a public IP address to the instance.

Answer: B
NEW QUESTION # 143
You have an application hosted on a Compute Engine virtual machine instance that cannot communicate with a resource outside of its subnet. When you review the flow and firewall logs, you do not see any denied traffic listed.
During troubleshooting you find:
* Flow logs are enabled for the VPC subnet, and all firewall rules are set to log.
* The subnetwork logs are not excluded from Stackdriver.
* The instance that is hosting the application can communicate outside the subnet.
* Other instances within the subnet can communicate outside the subnet.
* The external resource initiates communication.
What is the most likely cause of the missing log lines?

  • A. The traffic is not matching the expected egress rule.
  • B. The traffic is not matching the expected ingress rule.
  • C. The traffic is matching the expected egress rule.
  • D. The traffic is matching the expected ingress rule.

Answer: B
NEW QUESTION # 144
You want to set up two Cloud Routers so that one has an active Border Gateway Protocol (BGP) session, and the other one acts as a standby.
Which BGP attribute should you use on your on-premises router?

  • A. Community
  • B. Local Preference
  • C. AS-Path
  • D. Multi-exit Discriminator

Answer: D
NEW QUESTION # 145
You need to create a GKE cluster in an existing VPC that is accessible from on-premises. You must meet the following requirements:
IP ranges for pods and services must be as small as possible.
The nodes and the master must not be reachable from the internet.
You must be able to use kubectl commands from on-premises subnets to manage the cluster.
How should you create the GKE cluster?

  • A. * Create a VPC-native GKE cluster using user-managed IP ranges.
    * Enable privateEndpoint on the cluster master.
    * Set the pod and service ranges as /24.
    * Set up a network proxy to access the master.
    * Enable master authorized networks.
  • B. * Create a VPC-native GKE cluster using GKE-managed IP ranges.
    * Set the pod IP range as /21 and service IP range as /24.
    * Set up a network proxy to access the master.
  • C. * Create a VPC-native GKE cluster using user-managed IP ranges.
    * Enable a GKE cluster network policy, set the pod and service ranges as /24.
    * Set up a network proxy to access the master.
    * Enable master authorized networks.
  • D. * Create a private cluster that uses VPC advanced routes.
    * Set the pod and service ranges as /24.
    * Set up a network proxy to access the master.

Answer: A Explanation:
Creating GKE private clusters with network proxies for controller access When you create a GKE private cluster with a private cluster controller endpoint, the cluster's controller node is inaccessible from the public internet, but it needs to be accessible for administration. By default, clusters can access the controller through its private endpoint, and authorized networks can be defined within the VPC network. To access the controller from on-premises or another VPC network, however, requires additional steps. This is because the VPC network that hosts the controller is owned by Google and cannot be accessed from resources connected through another VPC network peering connection, Cloud VPN or Cloud Interconnect. https://cloud.google.com/solutions/creating-kubernetes-engine-private-clusters-with-net-proxies
NEW QUESTION # 146
You have an application that is running in a managed instance group. Your development team has released an updated instance template which contains a new feature which was not heavily tested. You want to minimize impact to users if there is a bug in the new template.
How should you update your instances?

  • A. Using the new instance template, perform a rolling update across all instances in the instance group. Verify the new feature once the rollout completes.
  • B. Perform a canary update by starting a rolling update and specifying a target size for your instances to receive the new template. Verify the new feature on the canary instances, and then roll forward to the rest of the instances.
  • C. Deploy a new instance group and canary the updated template in that group. Verify the new feature in the new canary instance group, and then update the original instance group.
  • D. Manually patch some of the instances, and then perform a rolling restart on the instance group.

Answer: C Explanation:
Explanation/Reference: https://cloud.google.com/compute/docs/instance-groups/creating-groups-of-managed-instances
NEW QUESTION # 147
...... First and foremost, in order to cater to the different needs of people from different countries in the international market, we have prepared three kinds of versions of our Professional-Cloud-Network-Engineer learning questions in this website. Second, we can assure you that you will get the latest version of our Professional-Cloud-Network-Engineer Training Materials for free from our company in the whole year after payment on Professional-Cloud-Network-Engineer practice materials. Last but not least, we will provide the most considerate after sale service on our Professional-Cloud-Network-Engineer study guide for our customers in twenty four hours a day seven days a week. Exam Professional-Cloud-Network-Engineer Demo: https://www.test4engine.com/Professional-Cloud-Network-Engineer_exam-latest-braindumps.html DOWNLOAD the newest Test4Engine Professional-Cloud-Network-Engineer PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=14ZggXvKJDXRmy3D75PP2zf58ysoBiMUJ