over 1 year ago

Our evaluation system for NS0-520 test material is smart and very powerful. First of all, our researchers have made great efforts to ensure that the data scoring system of our NS0-520 test questions can stand the test of practicality. Once you have completed your study tasks and submitted your training results, the evaluation system will begin to quickly and accurately perform statistical assessments of your marks on the NS0-520 exam torrent. In a matter of seconds, you will receive an assessment report based on each question you have practiced on our NS0-520 test material. The final result will show you the correct and wrong answers so that you can understand your learning ability so that you can arrange the learning tasks properly and focus on the targeted learning tasks with NS0-520 test questions. So you can understand the wrong places and deepen the impression of them to avoid making the same mistake again.

What Network Appliance NS0-520 Certification Exam is All About?

NS0-520 Exam is also known as NetApp Certified Implementation Engineer-SAN Specialist. This certification exam is authorized by the Network Appliance. It is designed to evaluate the skills of a candidate in planning, implementing, integrating, and troubleshooting ONTAP SAN, FC switched fabrics, Ethernet iSCSI/FCoE solutions, and different operating systems (Windows, LINUX, ESX, UNIX) and applications. If you are preparing for the NS0-520 exam, then you must have a strong understanding of existing large aging, qtree, zones, and the different types of SAN and storage technologies. The certification exam is designed to evaluate the candidates' ability to configure, implement, and troubleshoot various SAN and storage technologies in a real-world environment. The optimized and symmetric active path design of the SAN, scalability, fault tolerance, and reliability of the storage technology must be understood. NS0-520 exam dumps will help you to prepare for the NS0-520 exam with ease. >> Network Appliance NS0-520 Exam Cram Review <<

NS0-520 Latest Dumps Ebook | Pass4sure NS0-520 Dumps Pdf

If you are craving for getting promotion in your company, you must master some special skills which no one can surpass you. To suit your demands, our company has launched the NetApp Certified Implementation Engineer - SAN, ONTAP NS0-520 exam materials especially for office workers. For on one hand, they are busy with their work, they have to get the Network Appliance NS0-520 Certification by the little spread time.

Network Appliance NetApp Certified Implementation Engineer - SAN, ONTAP Sample Questions (Q163-Q168):

NEW QUESTION # 163
You are configuring a new Netapp ONTAP cluster and are connecting the nodes to Cisco MDS SAN switches. You connect one of the nodes to switch port fc1/11 and run the commands that are shown in the exhibit. The SAN LIFs are enabled but are not operationally online, and none of the SAN hosts can access their LUNs on the ONTAP cluster.
In this scenario, which configuration would cause this problem?

• A. The in-order guarantee is not enabled on the switch
• B. Interoperability mode is not enabled on the switches
• C. NPIV is not enabled on the switches
• D. NPV is not enabled on the switches

Answer: C Explanation:
in-order guarantee and interoperability mode are default configuration on a VSAN NPV is the core switch where NPIV is going to be enabled.
The NPV core switch is defined as an upstream switch on which NPIV is enabled. The NPV core switch receives traffic that is passed to it from a downstream switch that has NPV enabled on it. A switch that is in NPV mode does not switch traffic; instead, it passes traffic to the upstream NPV core switch on which NPIV is enabled.
After NPIV is enabled on the core NPV switch, the port should automatically come up (unless there are other issues).
You can find more information on this link:
https://www.cisco.com/c/en/us/td/docs/storage/sanswitches/mds9000/sw/rel3x/troubleshooting/guide/trblgd/tsnpv.html#wp131957
NEW QUESTION # 164
You are asked to configure a small environment for a branch office. The customer has two new VMware ESXI hosts and a Netapp FAS2750 for the site. They want to allocate 10 GB for their ISCSI network to be used for datastores. However, they do not want to purchase any new switches for the environment. In this scenario, Which statement is correct?

• A. 10 GB switches are required for this configuration
• B. The environment will have to be configured with 1 GB networking
• C. The SMB protocol will need to be used
• D. Configure direct attached connections between the two hosts and storage

Answer: D Explanation:
Direct-attachment
In a direct-attached configuration, one or more hosts are directly connected to the controllers.
You can find more information on this link:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-sanconf%2FGUID-193CC377-5C6F-4D3C-B42E-CE71AB6AA77F.html
NEW QUESTION # 165
Which data collection tool would be used for obtaining detailed information about hosts that are attached to ONTAP storage?

• A. Brocade Network Advisor
• B. OneCollect
• C. Conflg Advisor
• D. Upgrade Advisor

Answer: B
NEW QUESTION # 166
Which FC service is used by a host for discover service to locate FC targets that are available?

• A. The fabric name service
• B. The fabric security server
• C. The fabric configuration server
• D. The fabric zone server

Answer: A Explanation:
When a node is connected to the FC SAN, each SVM registers the World Wide Port Name (WWPN) of its LIF with the switch Fabric Name Service.
You can find more information on this link:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-sanag%2FGUID-6DDD6DEC-B3B2-482E-AB56-08641D35222E.html
NEW QUESTION # 167
Exhibit.

You are adding a boot LUN for a new server. The server uses FCP attached through a CNA.
The ONTAP cluster is also attached to the same fabric by way of UTA2. You configure the zoning for the fabric as shown in the exhibit. You discover that the server cannot see its boot LUN.
What is the problem with your zoning configuration?

• A. The zone set must have the same name as the zone.
• B. The zone was not activated.
• C. The zone used a wrong zone ID.
• D. The WWPN for the NetApp LIF is incorrect.

Answer: D
NEW QUESTION # 168
...... Having a NS0-520 certificate is a task that every newcomer rookie dreams about. With it, you can not only become the elite in the workplace in the eyes of leaders, but also get a quick promotion and a raise, and maybe you have the opportunity to move to a better business. Whether you are a student or an office worker, you can be satisfied here, and you will never regret if you choose NS0-520 Exam Torrent. For we have successfully help tens of thousands of candidates achieve their aims. We believe you won't be the exception to pass the NS0-520 exam and get the dreaming NS0-520 certification. NS0-520 Latest Dumps Ebook: https://www.braindumpsqa.com/NS0-520_braindumps.html