Forums » Discussions » How do I fix Epson error 0x97?
One may get an Epson code 0x97 at any time without any prior warning. You will get an instant message/notification to turn off and turn on again your PC. This will keep on happening until you don't fix it. Below we have mentioned a 3 steps process to solve the error.
Disconnect and connect the plug in reverse manner Using a wet tissue Epson 0*97 fix patch (Download it)
Epson error code 97 can be fixed simply. If you are still facing any issue, you can connect with us 24*7 for technical support.
Our experts are here solving renew avast, microsoft office license expired and many more.
Solution 1: Unplug and Plugin the Printer Firstly, you have to open the case of your printer and see if any paper materials are jammed. If present, remove all the paper straps carefully. Now, remove all the cartridges of your printer carefully and unplug all the USB cables of your Epson Printer and then turn off the printer by pressing the power button. Wait for few seconds, and plug back all the USB cables that were removed to the printer. Now switch ON the printer and check if the error 0X97 is fixed or not. If the error is not repaired, then try the solution 2.
Solution 2: Unplug and Plugin your Printer in Inverse manner This process is quite opposite to solution 1. Through this process, you can know whether the error has occurred due to internal hardware failure or not.
First of all, shut down your printer by pressing the power button and unplug all the USB cables. Wait for 5 minutes and press & hold the power button of the printer for more than 1 minute. Now while pressing the power button, plugin all the USB cables. Press the power button for another 1 minute after plugging in all the cables. Now plug back the power cable and release the power button. Check if the error is displaying or not.