over 1 year ago

What's more, part of that SureTorrent JN0-635 dumps now are free: https://drive.google.com/open?id=1p4mb3DbNd7wphuxroTgBhWFNqdb_kOs- Our JN0-635 training materials have been honored as the panacea for the candidates for the exam since all of the contents in the JN0-635 guide quiz are the essences of the exam. There are detailed explanations for some difficult questions in our JN0-635 exam practice. Consequently, with the help of our JN0-635 Study Materials, you can be confident that you will pass the exam and get the related certification as easy as rolling off a log. So what are you waiting for? Just take immediate actions!

Recertification Details

You can recertify for the JNCIP-SEC through testing by passing the relevant professional-level exam, by nailing the expert-level exam to advance the certification level, or by attending courses by Juniper Networks or any Juniper Networks Authorized Education Partners. If you pass an exam or take a course that is at a higher level than the certification you opt to recertify, you can renew all lower-level designations within that certification track. For example, if you recertify the expert-level JNCIE-SEC certification either through testing or by a course, you would have effectively recertified the lower-level security certificates including the JNCIP-SEC, JNCIS-SEC, and JNCIA-SEC. This recertification is valid for another three years from the time you passed the recertification exam or course. If you fail to recertify by the end of the active period, you will have to re-earn the certification from scratch.

JN0-635 Exam Process

The Juniper JN0-635 test will continue for 120 minutes. Besides, there are 65 multiple-choice items. You can get to know your pass/fail status immediately after the official test. Once you successfully clear such an exam and obtain your JNCIP-SEC certification, it is valid for three years. >> JN0-635 Valid Test Tutorial <<

JN0-635 Exam Online, JN0-635 Study Plan

Our technology and our staff are the most professional. What are the JN0-635 practice materials worthy of your choice, I hope you spend a little time to find out. First of all, after you make a decision, you can start using our JN0-635 Exam Questions soon. We will send you an email within five to ten minutes after your payment is successful. You can choose any version of JN0-635 study guide, as long as you find it appropriate.

Juniper Security, Professional (JNCIP-SEC) Sample Questions (Q74-Q79):

NEW QUESTION # 74
Click the Exhibit button.

userehost# run show route
inet.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
0.0.0.0/0 *[Static/5] 00:05:06
> to 172.16.1.1 via ge-0/0/1.0
172.16.1.0/24 *[Direct/O] 00:05:06
> via ge-0/0/1.0
172.16.1.3/32 *[Local/0] 00:05:07
Local via ge-0/0/1.0
192.168.200.2/32 *[Local/0] 00:05:07
Reject
vr-a.inet.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
+ = Active Route, - =
Last Active, * = Both
192.168.1.0/24 *[Direct/0] 00:01:05
> via ge-0/0/2.0
192.168.1.1/32 *[Local/0] 00:01:05
Local via ge-0/0/2.0
vr-b.inet.0: 2 destinations, 2 routes (2 active, 0 holddcwn, 0 hidden)
+ = Active Route, - =
Last Active, * = Both
192.168.1.0/24 *[Direct/O] 00:01:05
> via go-0/0/3.0
192.168.1.1/32 *[Local/0] 00:01:05
Local via ge-0/0/3.0
User 1 will access Server 1 using IP address 10.2.1.1.
You need to ensure that return traffic is able to reach User 1 from Server 1.
Referring to the exhibit, which two configurations allow this communication (Choose two.)

• A. [edit security nat static]
  [email protected]# show
  rule-set server-nat {
  from zone [ untrust ];
  rule 1 {
  match {
  destination-address 10.2.1.1/32;
  }
  then {
  static-nat {
  prefix {
  192.168.1.2/32;
  }
  }
  }
  }
  }
• B. [edit security nat static]
  [email protected]# show
  rule-set in {
  from zone untrust;
  to zone cust-a;
  rule overload {
  match {
  source-address 0.0.0.0/0;
  }
  then {
  source-nat {
  interface;
  }
  }
  }
  }
• C. [edit security nat static]
  [email protected]# show
  rule-set server-nat {
  from zone [ junos-host untrust ];
  rule 1 {
  match {
  destination-address 10.2.1.1/32;
  }
  then {
  static-nat {
  prefix {
  192.168.1.2/32;
  routing-instance vr-b;
  }
  }
  }
  }
  }
• D. [edit security nat static]
  [email protected]# show
  rule-set server-nat {
  from zone untrust;
  rule 1 {
  match {
  destination-address 10.2.1.1/32;
  }
  then {
  static-nat {
  prefix {
  192.168.1.2/32;
  routing-instance vr-a;
  }
  }
  }
  }
  }

Answer: C,D
NEW QUESTION # 75
Click the Exhibit button.

A user reports trouble when using SSH to a server outside your organization. The traffic traverses an SRX Series device that is performing NAT and applying security policies.
Referring to the exhibit, which configuration will allow you to see the bidirectional flow through the SRX Series device?

• A.
• B.
• C.
• D.

Answer: C
NEW QUESTION # 76
Click the Exhibit button.

You are asked to look at a configuration that is designed to take all traffic with a specific source IP address and forward the traffic to a traffic analysis server for further evaluation. The configuration is not working as intended.
Referring to the exhibit, which change must be made to correct the configuration?

• A. Apply the filter as an input filter on interface xe-0/0/1.0
• B. Create a routing instance named default
• C. Apply the filter as an input filter on interface xe-0/2/1.0
• D. Apply the filter as an output filter on interface xe-0/1/0.0

Answer: A
NEW QUESTION # 77
How does secure wire mode differ from transparent mode?

• A. In secure wire mode, IRB interfaces can be configured to route inter-VLAN traffic
• B. In secure wire mode, no switching lookup takes place to forward traffic
• C. In secure wire mode, security policies cannot be used to secure intra-VLAN traffic
• D. In secure wire mode, traffic can be modified using source NAT

Answer: B Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-secure-wire.html
NEW QUESTION # 78
Click the Exhibit button.

The exhibit shows a snippet of a security flow trace. A user cannot open an SSH session to a server. Which action will solve the problem?

• A. Create a route to the desired server
• B. Create a security policy that matches the traffic parameters
• C. Create a route entry to direct traffic into the configured tunnel
• D. Edit the source NAT to correct the translated address

Answer: B
NEW QUESTION # 79
...... As a professional website, SureTorrent offers you the latest and valid JN0-635 test questions and latest learning materials, which are composed by our experienced IT elites and trainers. They have rich experience in the Juniper actual test and are good at making learning strategy for people who want to pass the JN0-635 Practice Exam. JN0-635 Exam Online: https://www.suretorrent.com/JN0-635-exam-guide-torrent.htmlWhat's more, part of that SureTorrent JN0-635 dumps now are free: https://drive.google.com/open?id=1p4mb3DbNd7wphuxroTgBhWFNqdb_kOs-