almost 2 years ago

DOWNLOAD the newest Pass4Leader 200-301 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1wwemlCuTQpwWSnakOCC2ReS6tOjC6G02 You can download the trial version of our 200-301 learning material for free. After using the trial version of our 200-301 study materials, I believe you will have a deeper understanding of the advantages of our 200-301 training engine. The development of society urges us to advance and use our 200-301 Study Materials to make us progress faster and become the leader of this era. The best you need is the best exam preparation materials. Our 200-301 exam simulation will accompany you to a better future.

Cisco 200-301 Exam Syllabus Topics:

Topic	Details
Topic 1	Describe AP And WLC Management Access Connections Configure And Verify Vlans (Normal Range) Spanning Multiple Switches
Topic 2	Explain The Function Of SNMP In Network Operations Explain The Role Of DHCP And DNS Within The Network
Topic 3	Describe The Use Of Syslog Features Including Facilities And Levels Configure And Verify NTP Operating In A Client And Server Mode
Topic 4	Differentiate Authentication, Authorization, And Accounting Concepts Configure Device Access Control Using Local Passwords
Topic 5	Configure And Verify Ipv4 Addressing And Subnetting Configure And Verify Ipv6 Addressing And Prefix
Topic 6	Configure And Verify Layer 2 Discovery Protocols (Cisco Discovery Protocol And LLDP)
Topic 7	Configure And Verify (Layer 2 Layer 3) Etherchannel (LACP) Describe Physical Infrastructure Connections Of WLAN Components
Topic 8	Explain Virtualization Fundamentals (Virtual Machines) Explain The Role And Function Of Network Components
Topic 9	Configure WLAN Using WPA2 PSK Using The GUI Describe Remote Access And Site-To-Site Vpns
Topic 10	Describe Characteristics Of Network Topology Architectures Compare Ipv6 Address Types
Topic 11	Identify Interface And Cable Issues Compare Physical Interface And Cabling Types
Topic 12	Configure And Verify Ipv4 And Ipv6 Static Routing Describe The Capabilities And Function Of TFTP FTP In The Network
Topic 13	Describe The Need For And Basic Operations Of Rapid PVST+ Spanning Tree Protocol And Identify Basic Operations
Topic 14	Describe The Purpose Of First Hop Redundancy Protocol Interpret The Components Of Routing Table
Topic 15	Verify IP Parameters For Client OS (Windows, Mac OS, Linux) Describe The Need For Private Ipv4 Addressing
Topic 16	Describe Wireless Security Protocols (WPA, WPA2, And WPA3) Configure And Verify Access Control Lists
Topic 17	Compare Cisco Wireless Architectures And AP Modes Configure And Verify Interswitch Connectivity

Topics Covered in Cisco 200-301 Exam

In a nutshell, the Cisco 200-301 exam embodies the questions covering the basics of the latest technologies and software development knowledge. The skills measured in the test tackle various topics, including but not limited to:

• IP services – 10%;
• Security basics – 15%;
• Network fundamentals – 20%;
• IP connectivity – 25%.

>> 200-301 Reliable Dumps Book <<

Latest 200-301 Training, 200-301 Dump Collection

It is critical to choose the proper training. There is no reason to refuse to choose Pass4Leader, it is popular with candidates. About Cisco 200-301 Exam, We provide the latest and the most effective questions and answers, under the premise of ensuring quality, we also offer the best price. Paypal settlement platform is to protect the security of your payment information. Pass4Leader equips the candidates with the most reliable learning materials and the latest Cisco 200-301 braindump.

Cisco Certified Network Associate Exam Sample Questions (Q210-Q215):

NEW QUESTION # 210
An application in the network is being scaled up from 300 servers to 600. Each server requires 3 network connections to support production, backup, and management traffic. Each connection resides on a different subnet. The router configuration for the production network must be configured first using a subnet in the 10.0.0.0/8 network.
Which command must be configured on the interface of the router to accommodate the requirements and limit wasted IP address space?

• A. ip address 10.10.10.1 255.255.254.0
• B. ip address 10.10.10.1 255.255.240.0
• C. ip address 10.10.10.1 255.255.255.240
• D. ip address 10.10.10.1 255.255.252.0

Answer: D
NEW QUESTION # 211
When OSPF learns multiple paths to a network, how does it select a route?

• A. For each existing interface, it adds the metric from the source router to the destination to calculate the route with the lowest bandwidth.
• B. It divides a reference bandwidth of 100 Mbps by the actual bandwidth of the exiting interface to calculate the route with the lowest cost.
• C. It counts the number of hops between the source router and the destination to determine the route with the lowest metric.
• D. It multiples the active K values by 256 to calculate the route with the lowest metric.

Answer: B Explanation:
Section: IP Connectivity
NEW QUESTION # 212
What are two reasons that cause late collisions to increment on an Ethernet interface? (Choose two.)

• A. when a collision occurs after the 32nd byte of a frame has been transmitted
• B. when the sending device waits 15 seconds before sending the frame again
• C. when the cable length limits are exceeded
• D. when Carrier Sense Multiple Access/Collision Detection is used
• E. when one side of the connection is configured for half-duplex

Answer: C,E Explanation:
Section: Network Fundamentals
Explanation:
A late collision is defined as any collision that occurs after the first 512 bits (or 64th byte) of the frame have been transmitted. The usual possible causes are full-duplex/half-duplex mismatch, exceeded Ethernet cable length limits, or defective hardware such as incorrect cabling, non-compliant number of hubs in the network, or a bad NIC.
Late collisions should never occur in a properly designed Ethernet network. They usually occur when Ethernet cables are too long or when there are too many repeaters in the network.
Reference: https://www.cisco.com/en/US/docs/internetworking/troubleshooting/guide/tr1904.html
NEW QUESTION # 213
Drag the descriptions of device management from the left onto the types of device management on the right.

Cisco DNA Center Device Management
3. Monitor the cloud for software update
5. Uses CLI templates to apply a consistent configuration to multiple devices at an individual location
6. Uses NetFlow to analyse potential security threats throughout the network and take appropriate action on that traffic Traditional device management
2. Manages device configuration on a per-device basis
4. Security is managed near the perimeter of the network with firewalls, VPNs, and IPS Implements changes via an SSH terminal Answer: ** Explanation:

NEW QUESTION # 214**
Refer to the exhibit.

A company is configuring a failover plan and must implement the default routes in such a way that a floating static route will assume traffic forwarding when the primary link goes down. Which primary route configuration must be used?

• A. ip route 0.0.0.0 0.0.0.0 192.168.0.2 floating
• B. ip route 0.0.0.0 0.0.0.0 192.168.0.2 tracked
• C. ip route 0.0.0.0 0.0.0.0 192.168.0.2
• D. ip route 0.0.0.0 0.0.0.0 192.168.0.2 GigabitEthernetl/0

Answer: B
NEW QUESTION # 215
...... The Cisco 200-301 certification exam syllabus is changing with the passage of time. As a 200-301 exam candidate you have to be aware of these Cisco 200-301 exam changes. To give you complete knowledge about the Cisco 200-301 Exam Topics, the Pass4Leader has hired a team of experts that consistently work on these changes and add these changes in Cisco 200-301 exam practice test questions. Latest 200-301 Training: https://www.pass4leader.com/Cisco/200-301-exam.html P.S. Free & New 200-301 dumps are available on Google Drive shared by Pass4Leader: https://drive.google.com/open?id=1wwemlCuTQpwWSnakOCC2ReS6tOjC6G02