Forums » Discussions » CTFL-AuT최신버전덤프샘플다운 - CTFL-AuT퍼펙트덤프데모다운로드

gywudosu
Avatar

CTFL-AuT시험은 영어로 출제되는 만큼 시험난이도가 높다고 볼수 있습니다.하지만 CTFL-AuT덤프만 있다면 아무리 어려운 시험도 쉬워집니다. 오르지 못할 산도 정복할수 있는게 CTFL-AuT덤프의 우점입니다.CTFL-AuT덤프로 시험을 패스하여 자격증을 취득하시면 굳게 닫혔던 취업문도 자신있게 두드릴수 있습니다. CTFL-AuT덤프를 구매하시고 공부하시면 밝은 미래를 예약한것과 같습니다.

ISQI CTFL-AuT 시험요강:

주제 소개
주제 1
  • Influence of AUTOSAR on the work of the tester (K1)
  • Application areas and boundary conditions of a HiL test environment
주제 2
  • Differences between Closed-Loop and Open-Loop (K2)
  • Contribution of the tester to the safety culture
주제 3
  • Context-dependent selection of test techniques (K3)
  • Objective of functional safety for E
  • E systems
주제 4
  • Assessment levels and capability indicators
  • Project aspects influenced by standards (K1)
주제 5
  • Advantages and disadvantages oftesting in the XiL test environments
  • Integration of the tester in the safety lifecyle (K2)
주제 6
  • Verification strategy and criteria for unit verification (SWE.4)
  • Motivation for a test environment in the automotive development (K1)

>> CTFL-AuT최신버전 덤프샘플 다운 <<

CTFL-AuT 덤프 ISQI 인증

관심있는 인증시험과목ISQI CTFL-AuT덤프의 무료샘플을 원하신다면 덤프구매사이트의 PDF Version Demo 버튼을 클릭하고 메일주소를 입력하시면 바로 다운받아ISQI CTFL-AuT덤프의 일부분 문제를 체험해 보실수 있습니다. PDF버전외에 온라인버전과 테스트엔버전 Demo도 다운받아 보실수 있습니다.

최신 Automotive Software Tester CTFL-AuT 무료샘플문제 (Q38-Q43):

질문 # 38
The following methods table shows a partial functional safety guideline of an OEM (Car Maker):

What do the plus symbols in the table mean for the taster of the supplier?

  • A. A single plus symbol means .must be covered by each tester of the supplier'. double plus symbol means
    "must be tested for applicability by me tester of the contractor".
  • B. The tester of the suppler must choose an appropriate combination of methods and explain Ms choice.
    The methods with a double plus symbol should be given higher consideration
  • C. Single plus symbol means .must be applied by the tester of the suppler", double plus symbol means 'can be applied by the tester of the supplier
  • D. Single plus symbol means .should be applied by the tester of the suppler", double plus symbol means
    "can be applied by the tester of the suppler".

정답：A
질문 # 39
Which test document is required according to Automotive SPICE®?

  • A. Test procedure specification
  • B. Test metrics report
  • C. Test management report
  • D. Load testing report

정답：A 설명：
Explanation
According to Automotive SPICE®, a Test Procedure Specification is required. The Test Procedure Specification is a detailed document that describes how a particular test case will be executed and what the expected results are. It is an essential part of the software testing process and provides a clear understanding of the testing approach and the scope of testing. The Test Procedure Specification is used by testers to ensure that the test cases are executed consistently and correctly, and it provides a reference for evaluating the test results.
Source: ISTQB Certified Tester, Automotive Software Tester (CT-AUT) Study Guide.
질문 # 40
During product development what does the tester create based on the Safety requirements?

  • A. Test cases to check compliance with the MISRA-C:2012 coding standard
  • B. Test cases and test procedure for the verification and validation of the safety related requirements
  • C. Test cases and test procedures for production
  • D. A software architecture that fulfils the requirement of .testability

정답：B 설명：
Explanation
According to the ISTQB Certified Tester, Automotive Software Tester (CT-AUT) study guide, testers should create test cases and procedures to verify and validate safety requirements. This includes creating a test plan to ensure that all the safety requirements are tested and verified for correctness. Testers should also create test cases to ensure that all safety requirements are met and that any violations are reported. Additionally, testers should ensure that any modifications or changes to the system are tested and verified for safety compliance.
질문 # 41
Which statement regarding the operating conditions and comparison of test environments is true?

  • A. The proximity to reality in a MiL test environment is higher than In a SI test environment
  • B. As tests for MIL and SIL take place closer to the test object, the test basis must have a higher degree of detail than In HIL.
  • C. The costs for debugging are higher for a Si test environment than for a MiL test environment.
  • D. To lest m a MIL test environment, a full system specification is necessary.

정답：B 설명：
Explanation
As tests for MIL and SIL take place closer to the test object, the test basis must have a higher degree of detail than in HIL. In MIL and SIL, the test object and the environment model must be defined in detail in order to create an accurate simulation of the real-world environment, so the test basis must include detailed information about the system and its components. In HIL, the test environment is more removed from reality, so the test basis does not need to be as detailed.
질문 # 42
Which statement regarding the objective of ASPICE and ISO 26262 Is true?

  • A. To determine the capability of the product development process, ISO 26262 defines requirements for the processes and methods to be used by the tester depending on the ASIL. For the development of E/E systems. ASPICE defines assessable requirements for the processes, Independently from the criticality.
  • B. For the development of E/E systems, ISO 26262 defines requirements for the processes and methods to be used by the tester independently from the ASIL. To determine the capability of the product development process. ASPICE defines assessable requirements for those processes depending on the critically.
  • C. For the development of EE systems. ISO 26262 defines requirements for the processes and methods to be used by the tester depending on the ASH. To determine the capability of the product development process. ASPICE defines assessable requirements for these processes, independently from the critically
  • D. To determine the capacity of the product development process, ISO 26262 defines assessable requirements for these processes independently from the critically. For the development of E'E systems.
    ASPICE defines requirements for the processes and methods to be used by the tester depending on the ASIL.

정답：A
질문 # 43
...... 제일 빠른 시일내에 제일 간단한 방법으로ISQI인증 CTFL-AuT시험을 패스하는 방법이 없냐구요? ITDumpsKR의ISQI인증 CTFL-AuT덤프를 공부하시면 가능합니다. ITDumpsKR의ISQI인증 CTFL-AuT덤프는 많은 분들이 검증한 가장 유력한ISQI인증 CTFL-AuT시험공부자료입니다. 덤프의 문제만 기억하시면 패스는 문제없기에 제일 빠른 시일내에 시험을 패스하여 자격증 취득이 가능합니다. CTFL-AuT퍼펙트 덤프데모 다운로드: https://www.itdumpskr.com/CTFL-AuT-exam.html