Forums » Discussions » Actual HPE6-A69 Test Answers & HPE6-A69 Study Reference

gywudosu
Avatar

Our online staff is professionally trained and they have great knowledge on the HPE6-A69 study guide. So they can clearly understand your requirements and ideas and then help you make the right choices. When you have purchased our HPE6-A69 exam practice, but you do not know how to install it, we can also provide remote guidance to help you complete the installation. All in all, we will always be there to help you until you pass the HPE6-A69 Exam and get a certificate. With the rapid development of the economy, the demands of society on us are getting higher and higher. If you can have HPE6-A69 certification, then you will be more competitive in society. Our HPE6-A69 study materials will help you get the according certification. Believe me, after using our HPE6-A69 Study Materials, you will improve your work efficiency. Our HPE6-A69 free training materials will make you more prominent in the labor market than others, and more opportunities will take the initiative to find you. >> Actual HPE6-A69 Test Answers <<

Free PDF 2023 HP HPE6-A69: Aruba Certified Switching Expert Written Exam Latest Actual Test Answers

Are you tired of preparing different kinds of exams? Are you stuck by the aimless study plan and cannot make full use of sporadic time? Are you still overwhelmed by the low-production and low-efficiency in your daily life? If your answer is yes, please pay attention to our HPE6-A69 guide torrent, because we will provide well-rounded and first-tier services for you, thus supporting you obtain your dreamed HPE6-A69 certificate and have a desired occupation. We can say that our HPE6-A69 test questions are the most suitable for examinee to pass the exam, you will never regret to buy it.

HP HPE6-A69 Exam Syllabus Topics:

Topic Details
Topic 1
  • Given a multi-site, multi-vendor scenario, explain how to implement an appropriate Layer 3 solution
  • Given a scenario with multiple identified network issues, resolve the issues

Topic 2
  • Given a network security issue, explain the methodology to use for analyzing the issues
  • Install and configure the wired network solution

Topic 3
  • Given a network design, apply appropriate NAE agents and apply to appropriate interfaces
  • Plan the wired network solution

Topic 4
  • Identify the appropriate use of configuration methods
  • Manage and monitor Aruba solutions

Topic 5
  • Given a multi-site, multi-vendor scenario, explain how to implement Aruba solution integration
  • Given a scenario with multiple network issues, identify the causes

Topic 6
  • Given a scenario, determine an approach to optimize the network
  • Given a set of customer requirements, create an implementation plan

Topic 7
  • Given a multi-site, multi-vendor scenario, explain how to implement an appropriate QoS solution
  • Given a multi-site, multi-vendor scenario, explain how to implement Layer 2 switching


HP Aruba Certified Switching Expert Written Exam Sample Questions (Q11-Q16):

NEW QUESTION # 11
An administrator warns to create an ACL.
Permit traffic from 192.168.10, 65 through 192.168.10.94
Permit traffic from 192 168 10 104 through 192 16810.119
deny all other ip traffic
Which configuration is required to accomplish the administrator's goals?
A)

B)

C)

D)

  • A. Option A
  • B. Option B
  • C. Option D
  • D. Option C

Answer: A
NEW QUESTION # 12
(Scenarios may contain multiple errors which may or may not Impact the solution > Refer to the exhibit.

An engineer has attempted to configure two pairs of switches in the referenced configuration it is required to implement VSX keep-alive at the aggregation layer.
The ports of the ArubaOS-CS 8325 switches used for Agg01 and Agg02 are populated as follows:

The configuration of switch AGG01 includes:

VSX keep-alive is not working. Which modification should you make lo resolve the error condition?

  • A. Edit interface 1/1/48, adding the command "vpn-instance KA"
  • B. Modify the Interface lag 2 command, removing "multi-chassis"
  • C. Edit the vsx-sync command, adding "keep-alive"
  • D. Modify the Keepalive peer 192.168.20.2 source 192 168.20.1 command, adding "vrf KA"

Answer: B
NEW QUESTION # 13
You are working with a customer whos has a paw of Aruba 8325 switches configured for Multi-Chassis Link Aggregation The customer is complaining that users are experiencing intermittent packet drops. Which action should be taken to quickly aid you in identifying the cause?

  • A. Check the configured VLANs using "show vsx config-consistency"
  • B. Setup a mirror session to niter packets for TCPDUMP analysis
  • C. Setup a mirror session to generate a Tshark file.
  • D. Enable debug of vri with "console" set as the destination

Answer: A
NEW QUESTION # 14
The customer is already using Aruba Gateway and third-party L2 switches New ArubaOS CX 6300 switches have been deployed for R&D. which have a requirement for user profiling and tunneled traffic between ArubaOS CX 6300 and Aruba Gateway What is required for this configuration to apply QoS user-based rules for the R&D client traffic?

  • A. Create a QoS policy for the UBT-client-VLAN traffic on the third-party switch.
  • B. Apply a port-access policy with QoS defined in the user role on the ArubaOS CX6300 switch
  • C. Apply a QoS rule to the ArubaCX 6300 client port, lo classify traffic before it is tunneled.
  • D. Manually prioritize IP protocol 47 traffic on the third-party switches to prioritize the tunneled traffic

Answer: C
NEW QUESTION # 15
Refer to the exhibit.

A customer has implemented this ArubaOS-CX solution. NetEdit is not present. After a while, the secondary node of the VSX-cluster fails. What is the correct procedure to replace the failed node as quickly as possible?

  • A. Replace the failed unit, boot up the new node without connecting cables, upgrade firmware, and restore and save config Shutdown all ports, reconnect the correct cables, and enable all ports
  • B. Replace the failed unit, connect the correct cables, boot up the new node in recovery mode, upgrade firmware and restore, and save config Then, reboot and wait for VSX to synchronize.
  • C. Replace the failed unit, boot up the new node without connecting cables, upgrade firmware and configure as secondary vsx node connect iSl and wart for VSX to synchronize After successful recovery, reconnect the remaining cables.
  • D. Replace the failed unit, connect the correct cables, boot up the new node and wait for VSX to synchronize configuration and firmware.

Answer: C
NEW QUESTION # 16
...... As the labor market becomes more competitive, a lot of people, of course including students, company employees, etc., and all want to get HPE6-A69 authentication in a very short time, this has developed into an inevitable trend. Each of them is eager to have a strong proof to highlight their abilities, so they have the opportunity to change their current status, including getting a better job, have higher pay, and get a higher quality of HPE6-A69 material, etc. HPE6-A69 Study Reference: https://www.certkingdompdf.com/HPE6-A69-latest-certkingdom-dumps.html