10 Myths Your Boss Is Spreading About Double Glazing Window Locks Repairs Double Glazing Window Locks Repairs

Double glazing window locks repairs are crucial to keep your home secure. Faulty handles or hinges can let draughts in to your home and leave your windows vulnerable to burglars.

Fortunately, it's not difficult to fix stiff uPVC locks and handles without replacing your door or window. Sometimes, cooling or lubricating double glazing repair Willenhall can help resolve any problems.

Broken Glass

Double glazing window locks may be worn out over time. The handles can become difficult to open or close. This could cause problems with air circulation in the home and also pose an issue for security. In order to rectify this issue, it's essential to repair the window in the shortest time possible.

Double-glazed windows consist of two or three panes of glass that have gas between them to provide insulation, and an elastomer seal that holds the panes in place. If you see condensation between the glass panes, it is likely that one of these seals needs to be replaced. It is usually necessary to replace just the one window pane and is a lot cheaper than replacing the entire window.

A blow-up seal in windows with double glazing usually results in condensation and cloudiness. It can be caused by many reasons, including air leaks or excessive moisture in the property. It is essential to contact an expert in double glazing to replace the gas and seal your double-glazed window when you spot this issue.

It is possible to replace one pane of double glazing glass but it is not recommended to do this without the assistance of a professional. It is important to have the right tools and know-how to do the job safely. You could end up damaging the window frame, or your health if you attempt to do it yourself.

If a double-glazed window gets stuck, many people employ a crowbar to attempt to open it. However, this typically results in the frame being damaged and swollen. A specialist in window repair can remove the handle and open your window without causing any further damage. They can also convert discontinued window mechanisms into new style modern mechanisms.

As time passes, window hinges can become stiffer and more difficult to open, especially in areas that are noisy. It is essential to regularly lubricate your window hinges with silicone spray. Be careful not to close the window using the handles or closing it heavily. This could damage the hinges.

Broken Sash

This is a frequent issue with older double-glazed windows. If the upper sash has been ripped out of its pocket, it can be difficult to lock it and then open the window. This usually happens because the pins are disengaged or a balance shoe has been disconnected. It is important to know the way your sash is configured before you attempt to repair it.

It can be resolved by removing the sash, and cleaning it thoroughly. This will let you know whether the sash is in good alignment. If not, you'll need to add sash stops in order to help hold it in place. These can be purchased on the internet or at many hardware stores. After cleaning the sash you can replace the parting beads and lubricate pulley axles using Teflon or silicon spray. It is a good idea to label the weights before you take them off to make sure you can put them back in the correct way.

A broken handle is another common problem. Window handles can be difficult to spot, but there are some obvious signs that indicate yours is damaged. If the handle is stiff or clunky or isn't solid, it's likely broken.

This could be because of an unintentional lack of use, but it's also possible that the handle has cracked or is detached. In certain cases, the handle may be internally broken and cannot be replaced. However, it's still worth trying to fix the issue as soon as possible.

To remove the window sash, you may need to unscrew hinges that hold it to the frame. It's not an easy task, so you'll require someone to assist you in holding the sash in place. After removing the hinges it's important to clean them as well as the areas around them. Reattaching the hinges is a good idea. You can test the handle to verify if it is working correctly. If it's not working, you should consider replacing it. This will ensure that your window is as safe as it could be.

Broken Handle

It is not unusual for a window handle to break or deteriorate over time. Therefore, it's crucial that any broken handles are repaired as fast as possible to avoid a inability to function and security issues.

It is, however, easy to replace a window handle. In contrast to a sash, which requires multiple bolts to secure, the window handle is secured with two screws which makes it a straightforward DIY task for anyone with a bit of know-how. It is essential to test the handle after it's installed to ensure that it works correctly. This includes locking the handle and looking for gaps that might allow drafts to enter or allow potential thieves to gain access to your home.

The most common reason for a broken window handle is that it's worn down from repeated use. However extreme stress or force can also lead to broken handles. Slamming or forcing a window open can place additional strain on the handle, which can increase the likelihood of injury, so it is always recommended to perform every handling task slow and slowly.

Other causes for a damaged hand are poor maintenance and aging or design problems. A lack of regular cleaning and lubrication may cause the handle to wear out quickly, and this is usually due to dirt or debris that builds up over time. The handle can also be damaged due to incorrect installation or problems with alignment.

If the fixes previously mentioned aren't working, the Tasker may require access to and remove the lock mechanism itself. This can involve removal of the frame, or 'breaking out' the window frame as well as the plastic bead (to give more wriggle room). A replacement lock could then be fitted which matches the profile of the existing uPVC handle. The new handle will be put back on and the process can be completed. If this is the situation, the Tasker will provide a quote for repair costs.

Faulty Lock

When window locks get damaged, it's vital to have the problem fixed immediately. A broken window can cause draughts, weaken security barriers and make the home vulnerable to burglary. Window lock repairs are typically minimal, but it's recommended to contact an expert before the issue becomes more severe and costs you more money.

UPVC window handles come in two styles that include cockspur handles and espagnolette handles. The first makes use of a central rod to operate the locking cams, which are shaped like mushrooms, which lock into window frame keepers. The lock's mushroom cams are activated by a handle that is attached to the spindle. The lock's latch then clips into a window frame's mortise and catches.

Both kinds of UPVC window locks are prone to damage, particularly in older homes. This could happen when the sash becomes warped or misaligned, or even becomes loose. In these situations the lock should be re-installed to prevent draughts and loss of energy efficiency. Tasker can repair the broken lock for you, leaving you with the assurance that your windows are secure from burglars.

A Tasker will first examine your double-glazed window and identify the problem. Once they have the necessary information, they'll prepare their tools before arriving at your home. They'll usually bring a Phillips head screwdriver, needle nose pliers, wood glue, and fine-grit paper.

If the sash has been misaligned, the Tasker will need to loosen the screws holding both pieces of the lock to the frame of the window. Then, they'll remove the latch, then fill the mounting holes with wood putty (if applicable) and sand the area until it's level with the rest of the frame.


If the lock is rusted the lock will be cleaned using an oil or wire brush. It is then lubricated with grease to ensure it functions smoothly. They'll also examine the condition of the latch before reinstalling it.