Ten Startups That Are Set To Change The Peugeot 208 Key Replacement Industry For The Better Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot key fob suddenly stopped working it could be due to an unresponsive battery in the coin-cell or damaged receiver modules, water issues, or a defective chip. Fortunately, all of these are simple to fix, and you'll have your vehicle back to normal in no time!

Car keys can also become faulty due to the blade getting worn. It is easy to fix when you visit your local Car Key Man Auto Locksmith and let them install an entirely new key blade for you.

Battery

The battery of the key fob in your Peugeot 308 can sometimes die or become weak enough to send an effective signal to the car. This can cause the key fob to stop working which prevents you from locking and opening the doors, or even starting your engine. You'll require a new battery for your key fob to correct this.

You can buy a brand new battery at an auto parts store, or at your local hardware store. Make sure the battery is brand new and not sitting on the shelf too long. A new battery will have greater capacity and will also be able to send a stronger signal the car.

After replacing the battery try unlocking the doors and locking them with the key fob. If the doors won't open it's likely that the issue lies with the car's receiver module that can be reset by your local Peugeot dealer.

The chip inside the key fob may also be damaged. peugeot 2008 key could happen when you drop your key fob on the ground or expose it to water. The rubber seals that protect the chip from moisture may wear down over time, particularly if the key fob is exposed to water for long periods of time like submerging it in the ocean at the beach. To prevent this from happening, you should keep your key fob away of moisture and away from water.

Water Damage

Don't let go of your key fob if it gets wet, whether you slipped into an aquisition or stumbled into a puddle. While the key fob has rubber seals which should shield it from water, prolonged exposure to water may cause damage to its electronic chip. Water is a great conductor, and any water that comes into the key fob will cause an array of short circuits which eventually damage the electronic chip. After removing the battery, clean the contacts with isopropyl Alcohol and dry it completely before putting it back into.

Your Peugeot 308 may not start because of a dead battery. If you have a spare car, jumper cables could be used to start the engine again. If the battery is damaged, it must be replaced.

Another possibility is a bad receiver in the vehicle, which can hinder it from receiving a signal from the key fob. It could be due to a problem with the antenna or wiring, or the key fob may be damaged. It might be necessary to program a new fob into your vehicle if using one. If you are unable to solve the issue yourself then contact a professional technician. A skilled technician will be able to find the issue quickly and fix it promptly.

Radio Interference

Signs like keys not being recognized or having a restricted range of operation usually mean there is a problem in the system. It is either radiated or conducted, with the former resultant from power supply cables or speaker wiring that is too close to electrical components. In general, rerouting cables and moving them away from these components will fix the issue.


It's unlikely that someone is watching the key fob's signals to take your car away, but it is possible that the signal has been drowned out by radio frequency interference. This is a simple issue to fix.

If your key fob is not being recognized by the system, you can try a new battery. Also, ensure that the battery you are using is the correct size and type. Batteries that are not the right size can damage your fob.

These devices could interfere with the key signal if they operate on the same radio frequency. It is best to avoid having these devices attached to your key fob.

Pairing Issues

The remote keyless entry system of automobiles has a receiver that receives radio signals from the key fob. It will not be possible to start your vehicle if the receiver is not functioning properly even if the key fob is functioning and can be reprogrammed. This issue can be caused by a variety of ways, such as a dead battery in the coin-cell, or water damage. The receiver may also be malfunctioning due to a software error or internal damage in the key.

The battery for your coin in your Peugeot 308 keyfob may have died. It is easy to replace it by using a fresh battery, however, it is essential to choose the right battery for your key fob. It is best to choose a battery that is the same size as well as voltage and specifications as the original.

Another reason that the reason your Peugeot 308 key fob might not be working is that it is linked to another vehicle. It is possible that you have accidentally given your key fob someone else, or the key was used to unlock other vehicles. This can be fixed by reprogramming the key fob using an OBDII scan. This tool will usually ask you for specific information regarding your vehicle, such as the VIN or engine type, so it's important to enter it correctly.