Peugeot Keys 101"The Ultimate Guide For Beginners Peugeot 208 Key Replacement

Peugeot 208 key replacement is best left to experienced auto locksmiths who have the right tools and know-how. They will be able to make and program new keys much faster than a dealership would and at a lower price.

If the key fob stopped locking or unlocking your doors, it is likely due to a dead battery in the coin. There are other causes why the key may be malfunctioning.


Dead Coin Battery

A dead coin battery can hinder your Peugeot 208 from locking or unlocking, and will not allow you to start the engine. In this case, you will need to choose the alternate method to start found in your vehicle's owner's manual.

The spark plugs might also be worn out. The spark plugs are responsible for igniting the fuel that ignites the engine. However, they have a limited time of life. They will eventually break down when they aren't used enough.

There is a straightforward solution to this issue. Check the voltage of the battery with a multimeter. If it's lower than 11.5 volts then you must replace it. It is also essential to clean the battery's contacts in the event that it is damaged by corrosion. This can be accomplished by removing the rubber covers off the two terminals on the battery and then using a wirebrush to eliminate any parts of the battery that are corroded. You should then reconnect your cables to connect the positive and negative poles.

Water Damage

If your 208 doesn't start and the battery has not failed, you should inspect the spark plugs. It is possible that they're dirty, causing them not to spark. This is easily fixed by cleaning the spark plugs in the workshop.

Peugeot cars use a transponder key that is compatible with the car's immobiliser system. This ensures that only the right key is able to turn the engine. If the chip inside the Peugeot key is damaged, it won't send the correct signal to the vehicle.

This is a frequent issue that is caused by water damage. This is a common issue in areas with colder temperatures where the vehicle has been exposed to rain or snow. If this is the case, get in touch with a reputable locksmith who will have all of the tools and equipment needed to modify the new key. They will also have all the latest technology and equipment needed to create the Peugeot smart key. The process should take no more than 15 minutes.

Contacts to the battery are not working properly.

Peugeot replaced the transponder chips with a brand new type that uses electronic components that are mounted on a circuitboard. The new system is effective when it's fresh, but as time passes, the circuit boards begin to degrade and stop working correctly.

This can stop the immobiliser from activating so your vehicle won't start. If this is the case it's a good idea to contact a Peugeot specialist or locksmith.

The Keylab that is common is when the battery in the key fob begins to fail, which causes the blade of the key to stop getting into the lock. A car locksmith can replace the battery and cut a fresh blade for you, this is normally a quick fix.

Faulty Receiver Module

It could be that the receiver module is defective If your Peugeot key fob stops working after being dropped on the floor, or exposed to a sudden downpour or accidentally washed. The receiver module is responsible for transmitting radio frequency to the onboard computer that manages the central locking system of your Peugeot vehicle.

The key fob itself is fitted with rubber seals which prevent water from getting to the chip inside. The chip can be damaged by water if it is exposed to water for a long time. The high salt content of the pool or ocean waters could cause damage to the key fob if it is submerged.

The module will need to be replaced if your Peugeot spare key no longer works. This can only be done by a Peugeot specialist or a professional auto locksmith. As opposed to other cars, Peugeot keys are protected by an immobilizer that is unique and requires the correct programming to begin the engine. This is why you should be able to trust a professional Peugeot locksmith to take on the job of programming and creating an alternative.

Computer on board is not working properly

The on-board computer of your Peugeot is responsible many systems in your car, including airbags and power windows. If something goes wrong with these systems, they will usually display a code indicating the problem. The code will be stored within the system until the problem is resolved. This may require the on-board computers to be replaced.

The most typical reason for the warning light for airbags to illuminate is corrosion or loose connections in the sensor. This can be caused by wear and tear, aging, exposure to salt and moisture. It is essential to have this issue addressed as soon as possible, since the airbag malfunctioning could be dangerous in the event an accident.

If you see a card not found error on your Peugeot key fob, the battery inside the key fob might be weak or dead. This prevents the key fob from sending a signal that disables your vehicle's immobilizer. You can test this by pressing the unlock button on the key fob, then attempting to start your vehicle. If this does not work then the battery on the key must be replaced.