A Trip Back In Time A Conversation With People About Upvc Door Handle Replacement 20 Years Ago Choosing the Right UPVC Door Handle Replacement

Replacing your door handles made of upvc is relatively easy but selecting the correct handle can be difficult. Modern double-glazed handles are equipped with spring cassettes, but older handles don't.

If the handle of your upvc is loose and floppy, it could be a problem with the internal parts of the multipoint lock. This article will look at a number of potential problems and their causes.

Handles that are drooping or sagging

UPVC handles are susceptible to wear and tear. This is especially the case in older properties. The most common reason that a handle becomes floppy is due to a damaged spring cassette within the door lever. This is caused by a lot of force, and the square spindle that holds the cassette could be dislocated or rounded.

The good news is that replacing the door handle with uPVC is a fairly simple task and can be completed in a matter of minutes. The first step is to remove the old handle unit by unscrewing the fixing screws that are visible on the back of the handle lever plate. Once the handles have been removed, you can take them off and replace the cassette.

You can find a wide selection of uPVC door handles to pick from online and many of them come in different finishes. The finish you choose will determine the length of time your handle will last as well as how it is easy to keep clean. Finishes like Resista Stainless Steel, or PVD are designed to resist corrosion and last for up to 25 years.

After you have chosen the color or style, you can then select the type of handle you need. The most well-known types are pad and lever arrangements. Lever pads are typically used to block access by unauthorised persons. They are equipped with an inside lever and a paddle out.


The next step is to measure the dimensions of your existing handle and write them down. You will need to measure the PZ dimension which is the distance between the screw hole and the centre of your lever. It is also important to determine how long the handle is and the size of its keyhole. Once you know the measurements, you can compare them to the handle sizes matrix to determine the appropriate replacement.

Broken springs

Over time, the handles of uPVC doors are prone to becoming wobbly or loose and at times the spring cassette inside might break. These springs help align the handle lever in a horizontal position. Without them, your doors will not lock properly.

Modern uPVC handles are made with these cassettes directly built into the backplate. These springs are typically integrated into older uPVC door mechanisms. This isn't something you can be fixed on your own, but it's worth contacting your locksmith to look at as this could be the reason for the sagging or drooping uPVC door handles.

The most common issue with uPVC handles is that they tend to loosen as time passes. This is usually caused by worn-out springs, which are easy to repair. The majority of the time the reason for this is excessive use of the handle, and because of that the square spindle in the handle will wear out and cause the springs to be displaced.

To fix this, you will need open the door to the handle plate and then remove all the screws. This can be done with the help of a Philips screwdriver. Once the screws are removed the handle can be removed. The plates for the handle are then able to be gently taken apart. You can then remove the springs that were in use and replace them with fresh springs.

Depending on the kind of handle you have the distance between the two fixing screws can differ, and this is essential to know before purchasing the replacement. This measurement is known as the PZ and it is essential to use a calibrated measuring tape for an exact reading.

After replacing the springs, you should be able to operate the handle without issue. It is important to oil your internal mechanism to ensure that everything is operating just as it should. door handle repair will not only ensure that your uPVC doors are as safe as they can be but also make them more comfortable to operate for a long time.

Handles that slide around

Handles that slide around can be caused by a number of reasons, but one of the most common causes is when the levers of the handle aren't aligned properly with lock. This can happen on both uPVC doors and composite doors. However, it is more evident on older doors because they are made of less durable materials that don't stand up to the elements.

This issue can be fixed by a professional, who will adjust the handles and ensure they're in line with the door lock. They'll also examine the lock itself to determine whether there's anything that needs fixing. In many cases, a minor adjustment to the springs of the handle can fix the issue.

Changing your uPVC door handle is simple enough, but it's important to measure the measurements of the handles you have in place to ensure you have the right size replacement. You will need to measure the distance between the two screws, the dimensions of the keyhole as well as the lever, and the distance between them. You can then use this uPVC handles size guide to find the right replacement for your home.

After you have taken the measurements, you can remove the current uPVC handle. This is usually fairly straightforward and requires a screwdriver to reach the screws on the inside of the door. Once the screws have been removed, you'll have to take off the handle, and then put in the new one.

Before starting making any changes, make sure that the door is held open with a door wedge to stop it from closing in the middle of your work. After the handle has been removed, you can now get to the inside of the door to address the issues that cause it to slip.

If you don't have the time or the energy to complete this task on your own, an expert handyman from Fantastic Services can help. They will use special lock picking techniques to unlock the doors without damaging the door. They will then replace the broken handle and ensure that everything is working exactly as it should.

Gearbox damaged

A damaged gearbox could cause the handle made of upvc to become stiff and lose its functionality. This can also prevent the lock from being able be opened using the use of a key. This is a risk and must be addressed as quickly as is feasible. It is essential to contact a locksmith if you cannot resolve the problem yourself. They have the tools and know-how to do the job right.

The first step is to remove the handle from the cover plate. This can be done using the help of a screwdriver with an angled tip. After you remove the handle, you need to remove the middle screw which holds the barrel. After you have removed the middle screw you'll be able loosen the two screws that secure the barrel. You can then pull the barrel from the door. You'll have to prop the door open to accomplish this, so make sure you have someone on hand to help.

After taking the cylinder off and replacing it with a new cylinder. Make sure that the new cylinder has the same dimensions as the old one. You could end up with an incorrectly aligned handle. This can lead to a myriad of problems, such as leaks and drafts.

A lot of doors made of upvc have adjustable slots that can be used to tighten or loosen the handle. The slots are typically located on the inside of doors, near the spot where the handle meets with the cylinder. The slots for adjustment can be tightened by using an allen wrench. After you've made the required adjustments then you can screw the handle into and then put it back into its place. Then, you can test the handle to be sure that it's functioning correctly.

If the door handle of upvc becomes loose or floppy when it is closed, it's usually a sign that the gearbox in the upvc has failed or the internal spring components are in the process of breaking down. This could cause the upvc multipoint lock to fail, leaving your door open to intruders. In this case, the upvc gearbox must be replaced. It will cost between PS145 - PS280, including labour.