10 Healthy Habits To Use Kia Picanto Key Fob Replacement How to Replace a Kia Sportage Replacement Key


The key of a lot of Kia models comes with a keyless entry system built in. This key typically resembles the remote control and is able to be replaced with a brand new one from a Kia dealer or locksmith.

Key fobs are prone to malfunction for a variety of reasons, such as the battery of the coin is dead worn buttons signal interference, water damage and a faulty receiver module. Here are some helpful tips to help you get your Kia key fob that is a replacement for the sportage again.

How do you replace the remote key or smartkey

No matter if your Kia is equipped with an intelligent key, remote key, push-to-start key, or a regular non-transponder steel key The battery inside these keys will eventually need replacing. This is especially relevant if your vehicle displays a message that indicates that the remote or smart key has a low battery.

It's a simple procedure. In order to replace the battery of the key fob remove the mechanical key from the slit in the back of the key fob. You then need to remove the cover. Inside the key fob there will be the small screw that holds the battery in place. Utilizing a small screwdriver take the screw off and remove the battery that was in place. Insert the new battery and close the gap on the key fob.

When the key fob is equipped with new batteries Test it by pressing the locks and unlock buttons. If the doors lock and unlock in the same way, you're good to go! You can now utilize Kia's hands-free lock/unlock function when your fingers are cold or you need to go on errands around Brandon.

Note: Some key fobs (transponder chip or smart keys) might require their programming done. This requires a programming machine that is available only to the locksmith for cars or dealer. Other keys (non transponder metal keys) don't require programming. If your key requires to be reprogrammed, you must know the key code number printed on the tag that identifies the key and record it in a secure location.

How to replace the battery

If the Kia key fob doesn't respond when you press the lock/unlock button, it is likely that the battery is insufficient. A low battery may cause other issues, like the check engine light coming on or the engine not running properly. Fortunately, replacing the key fob battery is a simple DIY task that requires only a few basic tools.

Before beginning the process be sure that your vehicle is turned off and all doors are closed. Find the small metal or plastic piece that is on the bottom of your key fob and play with it until a metallic key is released. This key can be placed inside the driver door handle to unlock your car.

To replace the key fob's battery, remove the cover on the rear and use a plier bar tool to release the latch holding the black negative battery cable. Take the old battery out, and then orient the replacement battery in a way that its "+" side is facing you, and the "-" negative side is facing the fob's electrical contacts. Avoid using excessive force when pushing the new CR2032 into place to avoid damage or bending the metal contacts.

After the new battery has been installed after which you turn the key fob off and then on in the ignition repeatedly until the door locks. Then, test your Kia key fob to see whether it's functioning properly again.

How do you replace a smart keys

Depending on the model of your Kia Sportage, you may have the standard key fob, or a smart key. The difference between these is that the smart fob has the small blade of a key in it, whereas the standard fob doesn't. Both key fobs come with a battery that will eventually require replacing. Fortunately, it's a fairly simple process that takes just two minutes.

Make sure kia car key replacement The Keylab turn off your Kia and stand on a flat or well-lit surface prior to when you begin. Keep in mind that the fob is made up of small parts that can be thrown off should you not be careful.

The release button for the small size is located on the lower backside. It will be either an oval silver button or a rectangular slot. You can open the key fob by pressing the button.

Once the key fob is removed, you can remove the battery. The new battery should be a CR-2032, and can be bought online or from your local auto parts store. After you're done, your key fob will allow you to lock, unlock, and start your vehicle, even if it isn't running.

How do you replace the mechanical key

The Kia keyfob is an excellent convenience that allows us to lock or unlock our car with just pressing the button. But like any device, it can have problems from time to time. There are steps that can be taken to troubleshoot these issues and keep our key fobs in good condition over the long haul.

One of the most common issues is a low or dead battery. This could cause your device to stop working or operate intermittently. If this is the case then replace the battery with an entirely new battery.

If this does not resolve the issue, try using a standard flathead screwdriver to push the fob's plastic casing open. Be careful not to damage internal components, or scratch the plastic. When the battery is open, carefully take off the battery that was removed and replace it with a new one.

Close and open the door with the mechanical key. (Every kia fob comes with a spare mechanical key which will fit into the slot). Test the fob to make sure it's working as intended. Contact a dealer or a locksmith to resolve the problem if the fob is still not working. Make sure they make you an emergency key that can work across all trunk and door cylinders, to prevent lockouts in the future.