The 10 Scariest Things About Volvo Keyfob How to Change a Dead Volvo C30 Key Fob

The Volvo C30 is a good car that falls victim to a few minor flaws. The two front seats are comfortable, however the rear seats aren't as comfortable and the cargo space is limited.

If volvo key fob replacement isn't turning it is likely due to a range of issues. Certain keys require programming, and should only be done by a professional dealer or locksmith.

How to change the blade of the key

It is possible to unlock your Volvo with the mechanical blade even if your key fob is dead. The majority of new Volvo vehicles have a hidden mechanical key that can open the door of the driver in the event of an emergency, if keys for the remote aren't working. You can utilize the mechanical key to start your Volvo, provided the sensor remains active when you enter the vehicle.

To access the blade on the key, you must hold the fob with its "Volvo Cars" logo upside-down. Find the small black button on the bottom left of the key fob. Slide it down and then to your right. This will release the cover and let you gain access to the secret key blade within.

The key fob battery is simple to replace. Slide the key fob off the key ring, and lift the cover's back to reveal the battery. You should notice that the battery is typical CR 2032 watch-style cell. Replace the old battery with the new one. Be cautious not to touch either the + or - poles of the battery by using your fingers. These batteries are available in a variety of pharmacies and stores.

How to change the battery

The key fob has tiny batteries that is likely to need be changed at some point during your ownership of the vehicle. The fob comes with a blade that lets you unlock the driver's door if the battery in the remote dies or the keys have been lost.

You can change the battery, but you must be careful not to harm the metal contacts inside the back cover. A small flathead screwdriver, or a plastic tool called a pry bar can be used to open up the corner of the cover. After removing the cover you can change the battery by inserting a brand new silver button-cell (CR 2430 3-volt) with the "+", positive side facing downwards, and the "", negative side toward you.

The blade for the key can be fitted into the fob when the battery has been replaced. The alarm will be disengaged by pressing the unlock button once. Repeating the button will unlock all the doors and open the tailgate if you have one fitted to your vehicle.

You can buy replacement batteries at the majority of pharmacies or at the grocery store. They are typically sold as watch batteries and typically come with a set of numbers printed on the battery to help you identify it.

How to change the ignition cylinder

The ignition cylinders are essential for your Volvo to function correctly. They supply power to the various components of the vehicle and enable it to start. Over time they can wear out and must be replaced. If you find that your Volvo is having difficulty starting or stalls during driving, then you might need to replace your ignition cylinder.

If you're lucky, it could be an oversight you made wrong or an error made by you. It's possible that you didn't remove the key completely, or it could be stuck in the lock. You can try to get rid of the key by moving it around and gently shaking it. Avoid applying too much pressure, as it could break the steering wheel or the ignition switch.

Another possibility is that the ignition switch is malfunctioning. The switch is used dozens of times every day, so it's not a surprise that it will wear out. It's likely to fail on one of the settings which are used to power the ignition or other accessories and then stop. Stalling indicates that the ignition switch is on its way to fail completely, so it is crucial to have it checked out immediately if you notice issues.

The technician will examine the entire system to determine the root of the issue. They'll check the ignition key, the cylinder and other parts of the security system. They'll also examine your wiring if you own a more recent car to determine if it's experiencing any problems.

How to Change the Remote

There's a simple and quick method of replacing the battery in your Volvo key fob if it gets dead. You can use a screwdriver that is flat to open the cover on the back of your key fob and replace the battery. You can open the cover of the battery open by pressing the small grey button located in the upper right corner of your key fob. After that, you can take off the old battery and replace it with a new one, which is likely to take 30 minutes or less.


If you have a modern Volvo model with remote window roll down, you can even manage this feature using your Volvo key fob. You can also use the lock button to close the sunroof and windows (if equipped). The unlock button on the Volvo SUV key fob will deactivate the alarm and unlock the driver's door when you press it once. If you press the button twice, it will unlock the other doors and even the tailgate.

If you notice an "REMOTE BATTERY Low Voltage" message in your car's instrument cluster, or the locks don't respond when you're within distance, it's time for you to change the battery for your remote key. Replacing the battery of your remote key is a simple and fast procedure that can be completed in just a few minutes, either at home or through your local car dealer.