How To Get More Results From Your Defra Approved Back Boiler Stoves Defra Approved Back Boiler Stoves

There are many things to take into consideration when selecting the right stove. The appeal of dual function is only one of many aspects to take into consideration.

DEFRA approved back boiler stoves offer the ideal solution to these issues. They emit very little smoke since they use the minimum amount combustion air.

Clean Burn Technology

If you're looking for a clean burning stove with a huge firebox that can be used to heat your home and provide hot water to radiators, then a defra certified back boiler stove could be just what you're seeking. The stoves come with an integrated steel boiler that is capable of heating your central heating system as the fire is burning inside the stove, this means it's a much more efficient way to use a wood burner.

Most of our defra approved back boiler stoves come with a pre heated airwash system which helps keep the glass doors free of soot and ash deposits. DEFRA compliant stoves list -burns any unburnt particles produced during the initial combustion. This helps keep the flue gas clean, which leads to a more efficient burning process and lower cost of fuel.

Certain of our stoves have been independently tested and deemed Defra SE (Smoke Exempt). They achieve this by using an adjustment on the top air vent that stops you from shutting it completely, which would cut off the oxygen supply to the fire. This will cause it to smoulder instead of burning cleanly which results in more pollutants being released into the atmosphere.

Another important factor is the moisture content of your fuel, which could be a major contributor to the amount of smoke released by the stove. We recommend burning only seasoned, dried wood with a minimum moisture content of 20 percent to ensure that your stove burns as cleanly and efficiently as it can. Most of our Defra-approved stoves have a built-in moisture sensor that can alter the amount of heat burned when you use wet wood.

Some manufacturers have even gone a step further to enhance the efficiency of their stoves, by adding an advanced secondary clean burn system, which is controlled by an chrome pull lever at the base of the stove. It opens and closes the vent which draws air over the fire reburning the initial smoke created during the initial combustion process. Our Defra SE approved ranges are now even more efficient. You can save money on your energy bills.

Easy to Clean

A defra approved back boiler stove allows you to run your central heating and hot water from the same system. This is done by making a loop that connects the other taps on the back boiler (there usually are two) and your hot water tank. You can then use thermosyphoning in order to get heat into the home. This will ensure that your boiler never runs out of hot water since it will be supplied by the tank.

To ensure that your stove is operating at its optimum level of performance, you must clean it regularly. To begin, ensure the stove is cool. Then, wipe down the main body and the door of the stove with a clean cloth. We would recommend using a microfiber cloth, because they are less harsh than cotton ones.

It is a good idea, after wiping down your stove's interior, to clean the glass. Glass cleaners can aid in removing any stubborn stains and marks and is available from a variety of hardware stores. Glass cleaners should be used with caution since too much of it can harm glass surfaces.

Over time the seals around the glass and doors of your stove may begin to weaken. This can lead to gaps which can leak heat and therefore it is crucial to replace these seals once each year. This can be done using stove rope that is available in most hardware stores.

If you own an Eco Design 2022-compliant back boiler that is installed on a defra-approved stove, the combustion process will be much more efficient than with traditional wood-burning stoves. This is due to the fact that the most recent technologies have reduced the amount of combustibles part-burned that release into the atmosphere. Compliant stoves are more environmentally friendly and also cheaper to run.

Another thing to remember with a back boiler stove is that it is always a bit more expensive than a standard multi fuel stove, as it produces more hot water than a typical multifuel stove. But, it's an extremely cost-effective way to heat your home, since you can run both your central heating and hot water through the same source.

Easy to Install

Boiler stoves are stylish and efficient option that can provide heat and hot water for your central heating system. Unlike other multi-fuel stoves, that require connection to an existing gas boiler, wood burners with back boiler can connect directly to your main hot water and central heating supply and eliminate the need for a second heating system.

A wood burning with a back boiler can also be used to power your heating system entirely using renewable energy sources, making them a more eco-friendly choice than other stoves. They also produce less emissions because they burn logs or pellets, as opposed to gas or oil heating system, making them a great option for those concerned about global warming.

Many people are confused about how a wood burning stove with a back boiler works, the process of installing one is quite simple. The key is to ensure that the stove is installed and connected to your heating system, therefore it's best to have this completed by a licensed heating engineer. They can assist you in making sure that your stove has been properly installed and connected to the correct systems, in addition to making sure that all safety devices are in place.

Defra Approved stoves or Defra Exempt Stoves as they are sometimes called, have passed the Department of Environment, Food and Rural Affairs (DEFRA) standards for smoke emission levels. They can be used in Smoke Control Areas. They have been tested and modified to ensure they provide an extremely efficient combustion and can be used with wood or smokeless fuels.

DEFRA approved stoves such as the Defra Exempt Dunsley Yorkshire or our top-selling Hi-Flame Aidan can provide a very effective burn with very little harmful emissions. They have been tested according to the new Eco-Design regulations which imposes limits on the amount of particulate matter (PM) and CO2 NOx and organic gases a stove releases in normal operation.

Suitable for Smoke Control Areas


Smoke Control Areas are in place in most UK cities and towns. Burning logs on old stoves or open fireplaces can result in a fine if the smoke is considered to be a nuisance. If you select the correct appliance for your home, Defra-approved back boiler stoves are not subject to these restrictions.

Wood burners that are exempt from Defra are built with Clean Burn technology, which ensures that fuel is burnt efficiently and produces a minimum amount of smoke. You can still enjoy a stunning fireplace if you reside in a smoke-controlled area, but logs should be restricted to mineral fuels that are smoke-free.

They are compliant with Defra standards due to their airtight chambers that are precisely controlled for airflow. They also use triple airflow systems, which ensure that combustion byproducts are burned off before they exit the chimney. This not only helps to keep any unwanted smoke out, but also helps to reduce soot build up which can hinder the flue's flow and reduce gas efficiency.

It is essential that you purchase your Defra approved stove from an expert local Retailer who can ensure that the correct size stove is chosen for your room to give the best heating efficiency and ensure that it is fitted correctly by a HETAS certified installer. They can also help you with choosing the most appropriate chimney liner to ensure a safe and efficient installation, and help you decide if your home requires additional ventilation.

Modern DEFRA approved stoves are far superior to traditional open fires or wood burning stoves. They offer a minimum 75 percent efficiency, which will not only lower your environmental impact but also saves you money. Additionally, Defra approved stoves are capable of being used in a smoke-controlled area, and will require a minimum 6mm stainless steel twin wall chimney liner that is less expensive than the larger 12mm liners needed for Ecodesign stoves.

If you're in any doubt as to whether your home is in a smoke-free zone, contact your local council who can provide you with the most recent information. The majority of reputable stove manufacturers have a Defra-exempt category in their range to help you to determine if these appliances are in the right category.