The Upvc Window Replacement Hinges Case Study You'll Never Forget Choosing window hinges repair near me 's not as difficult as it could appear to choose and install Upvc replacement hinges. Check that the hinges' arrows are facing the correct direction and determine the thickness of the hinge arms on the opening frame (13mm or17mm).

There are a few different kinds of hinges to pick from, each with distinct features. This article will review some of the most commonly used uPVC hinges, as well as their benefits.

Egress/Easy Clean Hinge

They are a great choice to replace or upgrade windows for fire escapes because they can be opened at a 90-degree angle. They can be disengaged to an easy-clean position that allows you to see the outside of windows without having to climb ladders or lean at dangerous angles.

These heavy-duty egress hinges are made by Yale which is among the most popular and trusted home security brands on the market today. They work with all types of uPVC side-hung windows. By pressing a small button, the window sash will be slid to the side and into the position that is easy to clean. After closing, the window sash will revert to its original position.

They are available in 13mm and 17mm stack heights. Depending on the size of your window, we suggest using our Egress Selection Guide to determine which one is the best fit for you.

These hinges can be used with standard side-hung frames made of uPVC, or aluminium. The friction screw is used to adjust the resistance. This makes opening the windows easier and reduces the chances of closing the window accidentally during strong winds. They have been tested for more than thirty thousand cycles, and they are compliant with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

The Nico Egress Easy Clean friction hinge is easy to operate and does not have buttons or catch. It offers a convenient and safe solution for emergency exit and cleaning. The hinge retention clip is located in the inner corner of the bottom corner. This will release the bottom and top catches and allow you to slide the sash back into the clean position. Once you are in the clean position, close the window to reset the hinges to their egress position.

Fire-Escape Hinge

Fire Escape Hinges commonly referred to as "Easy Clean" hinges are used to replace side opening windows to allow escape (fire safety) reasons. These kinds of hinges for windows open more wide and faster than standard hinges to allow a large clear opening to escape in the case of a fire. This type of hinge is legal in any room with a window as required by building regulations.

They feature an exclusive friction stopper that allows the window to be opened to a 90 degree angle and also allows the sash opening to slide across the glass when it is open to make it easy to clean the outside of the glass without needing to use ladders. The hinges are easy to operate and don't have complicated buttons or catches. They can be operated from inside of the house using a simple, safe lever.

The hinges, which are manufactured in the UK by Cotswold, come with a child safety restriction for every day use. It can be reverted by an invisible button. You'll be able to rest of assurance that your children won't open the doors too far. The stack heights are 13mm or 17mm.


To purchase these hinges, measure the length of your existing side hung window hinge that fixes to the frame (see the guide on measuring your upvc window hinges). Choose the proper size hinge below.

It is important to note that the measurement is taken from the part that fixes to the frame and not the sash. The actual hinge length may be longer or shorter depending on the manufacturer of your old windows. Also, when selecting the size of your hinge, the majority of upvc windows can be fitted with a 13mm stack height but should your old window frame is 17mm wide, you should select the option to use this. You can also opt for the 4mm packer to compensate for the difference. All hinges are in two different directions (1 left and one right). Screws are not included in the hinges. If needed, they can be purchased separately. We suggest using our upvc window hinge repair screws. These screws are designed to improve the performance of your hinges and allow them work effortlessly for a longer. They feature a less friction design and an improved weather seal, with a brand new nylon reducer cap.

Restricted Hinge

There are times when windows must completely open, and this can be a problem using a standard hinge. These child safety friction hinges are a fantastic way to solve this problem. They can be used when ventilation is required, but escaping or cleaning the flame is not feasible. They limit the number of times you can opening the sash and permit the override of this limitation by pressing a button. They are available in 13mm and 17mm stack heights. They are suitable for both top and side hung windows.

The Nico Restricted Egress Friction Hinges blend the advantages of the standard restrictor, as well as an escape pivot to offer a simple and effective way to comply with building regulations. It is suitable for side-hung and top opening uPVC windows and comes in 17mm and 13mm stack heights. It is available in two parts, with one hinge being the one that is restricted for egress, and the other the unrestricted. This permits one hinge to be installed at the bottom and the other hinge is placed at the top.

These uPVC hinges are restrictive and have been tested to BS6375 Part 2 and are designed to be used on windows that cannot be fully opened such as a small children's bedroom. The mechanism restricts the amount the sash can open to a safety position of 100mm and re-engages once the window is closed.

These uPVC hinges with friction can be used with all types of windows. They are particularly useful for windows that are hard to reach, like those in three-storey houses or those that require the use of a ladder. They can be paired with our range of security enhancements like hinge guards, protection plates for hinges or dog bolts for PAS 24 performance.

It is important to measure the hinge on your current window to be able to find replacements of the same size. This can be done by looking through the image gallery of the hinge and then deciding where you want it positioned. The top hung hinges can only be positioned on one side, while the side-hung hinges can only be put on one side.

Standard Hinge

A standard hinge uses metal-to-metal contact, and there are no additional parts to decrease friction. It is available in many finishes and also comes with an NFPA-certified fire rating. To determine the radius of your hinge lay it flat and then line up the quarter and dime in two corners. If the dime fits better, the corner is rounded by 1/4 inch; if the quarter fit better, it's rounded by 5/8 inch.

The proper hinge can enhance or ruin the appearance of your door. It's important to match the finish and style of your door with the hinges to create a seamless design that is both functional and visually attractive.