10 Meetups About Window Handle Replacement You Should Attend Choosing the Right Window Handle For Your UPVC Window

The correct window handle is essential to properly fitting uPVC. You'll want a design that's not just functional but also fits the aesthetic of your home.

The process of changing the uPVC window handle is very simple. It only takes just a few minutes and the tools below.

Metal

Metal window handles can be both a decorative item as well as an essential piece of hardware to increase the security of your home. There are a variety of window handle designs made of metal that can be adjusted to different frames and materials. Certain of these handles are specifically created for sash windows in order to make the process of opening and closing the window easier and less likely to get jammed. For those seeking a more secure alternative, there are various locking mechanisms designed to block the window from being opened beyond a certain amount.


Espag handles are the most recognised type of window handle that is used on UPVC windows. They feature a mental spindle in the back, which is connected to the frame of the window and controls the window mechanism. They can be found on both UPVC and aluminium windows.

Cockspur handles are a different kind of window handle typically found on older UPVC windows. These handles are more difficult than modern Espag handles as they utilize a traditional peg locking mechanism.

Cam handles are available to give a sleeker look. These handles have a sleek edge and are designed to work with a variety of different types of uPVC window. They are ideal for tilt and turn windows, where it is possible to open the window from the bottom while allowing the top of the window to be opened.

It is crucial to take several aspects into consideration when selecting new window handles made of steel, including step height and which way the handle turns. The former refers to the distance between the handle's underside nose and the base of the screw plate, while the latter is the direction in which the handle will be able to turn. Some handles can only rotate in one direction, for example clockwise. Others are able to rotate in the opposite direction.

Plastic

There are a variety of varieties of plastic window handles. They all are designed to operate a window and protect it from unwanted invaders. They are available in a variety of colours and styles to suit uPVC and aluminium windows. Some are made with a lock that is built-in. This provides additional security and lets you leave the window open while still keeping it safe from burglars.

Different situations can trigger window handle problems. Sometimes, they may not be able to turn correctly. This could be because dust is able to penetrate the mechanism and causing dirt or a blockage. Another issue that is common is when the window handle starts walking in a tight circle or clings to something. This is an indicator that the window handle needs attention.

If this happens, you need to call a specialist. They can help you solve the issue quickly and efficiently. They can also offer advice on replacing a plastic window handle with new ones that is more efficient and more effectively.

Whatever type of handle you've got, most manufacturers will utilize the same fasteners. This means it's simple to replace your window handle and lock with a perfect match.

It is important to know the dimensions and style of your existing window before you search for the replacement handle. This will help ensure that you buy a handle that is perfect and won't cause any problems with your windows. Be aware of the size of the spindle, which is the distance the handle extends its nose from the base. This is important when you are planning to utilize a window handle that has restrictions.

Casement

Like awning windows, casement windows hinge on the top and bottom but they open to the left or right rather than opening up vertically. They are also less difficult to clean, and they provide a great view into your backyard or garden. They also let fresh air in. They're a popular choice for new construction and they can also add an architectural feature to older homes too. As time passes, they may become difficult to open or shut due to worn-out hardware or stripped gears. In certain cases window specialists may need to replace the crank mechanism.

Awning windows or casement windows are usually equipped with a roto gear and crank system to allow the window to be shut and open. window handles www.repairmywindowsanddoors.co.uk have an locking mechanism that holds the sash firmly in place when closed. The window's lock works in tandem with the bezel locks on the frame to secure the window. Many people tighten their casement window's operating handle. This could cause the locking mechanisms to work against each with windows to become tangled and not be able to open or close properly.

Over time, the window crank handle may also be stripped. This could happen if the window has been opened and closed repeatedly for an extended period of time. It could also happen when the window is used as a prop while it's open, which causes its operating handle to rub against the crank shaft and gears.

Replacing a window with a casement or an awning window crank is a simple DIY window repair. It can save you money over time. The first thing you'll have to do is locate the screws used to mount the trim that hold the casement cover in place (Photo 3). After removing the screws, you can remove the handle that was previously used and examine the crank mechanism. Gears can be relubricated but if they're stripped, you may need to replace them.

Cockspur

Cockspur window handles can be found on older uPVC timber, aluminium and timber windows. They lock using a key, easy to operate, and provide an effective barrier against noise and cold from outside. The handle is opened outwards when you press the lever. The cockspur nose closes over the wedge striker inside the frame, sealing the window. Replacing both the handle and cockspur wedge striker will make your double glazed windows much more efficient and can improve security.

The replacement cockspur window handles are available in left and right hand versions and operate by turning them 90 degrees. The handles are equipped with a small spur that pushes up against the PVC wedge of the window frame to create a secure closing. The handles are simple to put in and come with various finishes such as white, black, satin chrome and PVD gold.

Measuring the backset of a cockspur handle can be difficult, especially if you're replacing a handle. This handle has been designed to solve this issue and features three packers of various thicknesses which can be fitted on the underside of the handle nose to provide a variety of backset step heights including 9mm 13mm, 17mm, and 21mm.

The Schlosser Technik Apto is a premium quality replacement cockspur handle that can be used in a variety of applications between 9mm and 21mm, with flexible screw fixing centres. It also has key locking simple and simple to install, available in a range of finishes. It comes with left and right hand versions.

This cockspur handle is suitable for tilt and turn windows, but it will not work with a side opening casement window (these use an additional tilt and pivot). This handle can be used to replace damaged or old handles on uPVC and aluminium frames by using rivets instead of screws. You will require a rivet gun and rivets to fit this handle on the window frame you have.

Espagnolette

Espagnolette window handles, also known as espagnolette locks or shootbolts are the locking mechanism that connects to the multi-point lock system within your uPVC windows. They are a common feature in older homes and offer both aesthetics and security for your home. Espagnolette handle types can be key-locking or non-key-locking, and are available in both inline and cranked designs. They can be straight or curving. The key-locking push button adds additional security by preventing the handle from being pushed open from the outside using the long, thin screw driver stuck between the frames - a common method of burglary!

There is a huge variety of espagnolette handles you can pick from here at GB DIY Store. It is important to measure the size of the spindle on your current espag handle before ordering a replacement. After you've determined the spindle length of your current handle, look through our selection of espag handles to find the right design for your windows.

We carry a huge collection of white uPVC inline espagnolette handles in both key-locking and not-key-locking versions. They are available in a variety of colours and spindle lengths to ensure you can match your new handles to your existing window frame and décor. Our espagnolette handle collection features modern and contemporary styles, as also classic designs, and each replacement handle comes with a 5 different magnetic spindle lengths between 15mm and55mm, so you can easily fit the handle to your window without needing to purchase an exact size screw!

A clever rosette in the back of the rose will ensure that the spindle can be used with the left-hand lever or right-hand lever. This will prevent any accidents. A metal spindle insert also assists in securing the handle of the espagnolette in place, and the handle is held firmly in place with a clever 'click-fit' mechanism that is activated when rotated by hand to reveal an audible 'click'.