You Are Responsible For An Lock Replacement Budget? 12 Tips On How To Spend Your Money Door Lock Replacement - What Are the Different Parts of a Door Lock?

A damaged door lock could make your home an easy target for burglars. Change your locks is a cheap option to improve security without making your door inaccessible.

Many locks come packaged with a cardboard model that you can wrap around the edge of your door to make sure it will fit properly. This will aid you in avoiding buying the wrong lock.

The Cylinder

The cylinder, also referred as the lock body is the main part of the traditional mechanical door lock. It houses a series of spring-loaded pins which lock the door when there is no key placed into the hole. When the key is put into the doorknob the uneven edge pushes up on the pins inside of the cylinder, which allows them to be inserted into their proper place. When the pins fit, they alow the bolt, also referred to as the latch, to move forward, and then engage the inside of your door.

The bolt extends from the cylinder to an opening in your door frame that is called the box. The box is designed in a way that the bolt cannot be easily pulled out. A clip spring keeps the bolt in place when the door is closed. When you turn the handle to close the door, the spindle within the cylinder rotates. The slanted end retracts into the frame of the door once the spindle has finished rotating. The bolt rests on the carved-out region of your doorframe and keeps the door closed until you are required to open it again.

A faceplate is a metal plate that is attached to the interior of your door, on either side of the deadbolt hole. Its function is to shield your locking mechanism from damage that can result from the repeated removal and insertion of your knob. If you're installing an entirely new lock, make sure the faceplate is aligned with the hole in your door frame and is securely fastened to the plate as well as the bore of the latch.

When replacing the lock on a door, ensure that the deadbolt is correctly seated by sliding it in the the strike plate. After that, screw the strikeplate and the lock's core into place. Be careful not to over-tighten because this could cause damage to the latch and stop it from fitting into its groove in a proper way. You can test the new lock by rotating the key until it is locked position. If you spot any issues like a loud deadbolt or loose latches It's best to replace the old lock with a new one.

The Faceplate

A faceplate is a large flat plate that is attached to the headstock of a lathe in order to hold the workpiece. The screw thread is wound into the wood using a series of screw holes. Faceplates can be used to support a variety of shapes, but they are more difficult to use than a chuck because they must be placed properly, fixed, and balanced.


A typical faceplate is equipped with mounting holes. In this case three holes are located at 120 degrees intervals to accept the mounting screws 18 in FIGURE. 2. These screw holes are manufactured using an interchangeable insert 16 or directly into the faceplate body. The intermediate part of the faceplate is a stepped section that serves as an index mark to locate a specific position on the blank of the workpiece.

The stepping region is resistant to abrasion so that the fastener will not cause damage to the chisel that is that is used to cut into it. The faceplate's body has different properties than the surrounding area. Machining into this region warns the operator of impending contact with fasteners and allows them time to react.

Screws used to hold a faceplate in place should be of a size that seats in the recessed screw hole, leaving only a tiny amount of play. When the screw is fastened onto the glue block, there should be no space between it. This could allow the block to rotate to move. It is also a good idea to use a larger gauge screw because it will seat more securely in the faceplate. The screw should pass through the middle of the screwhole to prevent the possibility that the screwhead could come into contact with the workpiece.

The Strike Plate

The strike plate is one of the most vital components of your door lock. The strike plate is what prevents the bolt from slipping when you close the front door. The strike plate also helps reinforce the lock and prevents intrusions by putting force against the latch and jamb.

A strike plate is an large metal plate that is placed in the doorjamb, the vertical portion of the frame. It has a hole through which the latch or deadbolt can be inserted. When the cylinder is turned, the bolt shoots out of the strike plate and into the doorjamb, and it stays closed.

There are many different kinds of strike plates depending on your needs. If you require a strikeplate to fit your lock this article will provide it. However, the majority of strike plates are similar and will work with most standard latches and locks.

Most strike plates come with an ovular screw hole and an "C-shaped" piece that functions as washer. They are commonly used on doors that have corner rounded edges. They are available in various sizes to fit the door.

For added security, you can use strike plates with no lip and is designed specifically for deadbolts. This is a great option in areas where security needs to be accomplished quickly, such as stairs. It's also a great option if you need to protect equipment or documents in your home.

Another method to increase the security of your door is by installing the box strike plate which adds strength and thickness to the strike plate. This makes it more difficult to get in through the deadbolt or latch and is usually required for commercial doors with a security lock.

Spray a lock lubricant onto the strike plate if it isn't aligned with the latch bolt. If this doesn't work, you will need to adjust the strike plate by drilling new screw holes and enlarging the catch hole. You should not make many changes to the strike plate. Repeated and drastic adjustments could cause it to become ineffective.

The Deadbolt

A deadbolt is a metal bolt that connects the door to the doorjamb frame. Deadbolt locks differ from a spring latch found in doorknobs. Instead of being tied with credit cards or using professional tools such as latch slips, it can be locked using a key, thumb-turn, or electronically. They provide better protection against forced entry techniques like kick-ins and are easy to use with minimal maintenance.

The bolt is inserted into a hole or socket inside the doorjamb that is reinforced by a strike plate for additional security. The bolt must be at least 1 inch long to make it more difficult to remove from the door. It is also recommended to select deadbolts that have an ANSI rating, which shows how secure the lock is.

The strike plate also holds the cylinder in position. Three holes should run along the bolt. RepairMyWindowsAndDoors in the middle connects the facepiece to the cylinder and the remaining two are on either side of the central hole. The screws are then inserted into these holes to attach the cylinder and bolt. The screws must be included with the new deadbolt. Certain locks come with decorative covers that snap on to the facepieces. Consult the instructions provided by the manufacturer to ensure they are correctly installed.

When choosing the lock for your house, you should consider your lifestyle and the level of security that you require. Single deadbolts made of cylinders are the popular lock and are available on a variety of exterior doors. Keyless deadbolts may be more secure but more difficult to use. Smart deadbolts let you lock and unlock the bolt using voice commands or via a mobile app.

A professional locksmith will help you decide what type of lock is best for your home and can install or replace the lock. Upgrade your front door lock system to enhance the security of your home. Consider adding a double-cylinder or reversible deadbolt side of your front door to provide an additional layer of security.