10 Saab 9-3 Key Replacement That Are Unexpected How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners must follow a set of specific steps to add a second ignition key. It requires dealer assistance using the handheld computer known as Tech-2. Then the transponder is replaced and a key need to be purchased.

Rotate your keys to prevent one from wearing out quicker than the next. This will also keep your keys in top condition.

Replacement Case

The new key fobs aren't like the old Saab keys. They have electronics which make it hard to duplicate. This has made theft of cars a lot more difficult than it was just a few years ago. It has also made it more costly to replace keys that were lost.

Every owner of a 9-3 Saab should have at least two functioning keys. If one gets lost, it costs a lot of money to get another one for the vehicle because it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers charge between $100-$200 for this.

There are a few ways to avoid these expensive. Some parts providers will find the code from an old key (usually the same one that opens the doors and turns the ignition) and cut a brand new metal key blade for only a fraction of the dealer's cost. The key, however, must be identical to the original one to function properly within your car.

Follow these steps to replace the case. You'll require a flathead screwdriver and some patience. With the screwdriver, break apart the plastic, and then take off the emergency key. After the case is open take out all electronic components and place them in the new case. Make sure you insert the correct key and badge into the case.

Replacement Battery

The replacement battery for the Saab 9-3 is an affordable part that can be replaced easily and quickly. This YouTube video from Cyclone Cyd demonstrates the procedure for replacing the remote fob battery in just four steps. This tutorial is compatible with any modern Saab key fob. However, the process may differ slightly.

The first step is to find the button that lets off the backup key inside the fob. This button is typically located on the back of your fob, next to the Saab Logo. Use a flathead screwdriver to insert the screwdriver through the small hole in this button. This should be enough to allow you to open the fob case in order to change the battery.

After the new battery CR1632 is in place then you can reassemble your remote key fob. You can then program it to your car. The entire process should not take more than an hour, if not less. It's a simple procedure that doesn't require any special tools.

The process is a bit more complicated if you've lost your key, but it's possible. lost saab keys to first determine the VIN of the vehicle, and then purchase a replacement TWICE module and key blade with the correct unique code. After that, they'll be required to cut the replacement key and then program it using an innovative software tool called MDI.


Key Replacement Fob

The key fob is a device that locks and unlocks your car. It is equipped with batteries inside. Batteries have a limited lifespan and will eventually die. This is a regular issue that happens to all cars, and the good news is that you can change the batteries in many key fobs and not have to replace the whole case. You can buy replacement fobs from Amazon that have all the electronics already installed, which means you can just pop open the case and replace the batteries in the original case. You will need to remove the emergency key before you can replace the batteries. To accomplish this, simply insert the screwdriver of a small flat head into the slot in the middle of the. The case will split when you move the screwdriver around it.

When you are ready to replace the keys make sure you have spare keys, because this can cut down your total cost by a significant amount. If you have an additional key, request the dealer to cut it and program it for your car. This is much cheaper than purchasing a brand new key fob.

It is possible to add another key to your vehicle if you don't already have one, but it will require a great deal of research and effort. The cost for adding a second key is about a few hundred dollars and it also requires programming of the car's computer. Professionals can accomplish this however, it's a costly option.

Replacement Ignition

The modern SAAB 9-3 uses an alarm system that is more sophisticated built on a keycode. If you lose your only key, it can be costly to replace it with another one because the car must include a computer and be programmed to accept a new key. Dealers can even charge hundreds of dollars to program the new key when they are not able to complete the task.

If you've lost the only working key, a dealer will repair the computer in your car (known as the CIM or SAAB TWICE) to create a replacement, and they will charge top dollar for it. Instead we can reprogramme the EEPROM on your existing car computer to make it ready for a new key, which will save you more than 50% of what you'd pay at a dealership.

If you have owned a car like the SAAB 9-3 for quite a while you are aware that the ignition keys aren't very durable. If your ignition key isn't functioning properly, it is time to think about replacing it. They can become very sticky and the buttons can fall off. It's not as difficult as it appears to replace the ignition key. With the right tools, it is able to be accomplished quickly.