10 Pinterest Accounts To Follow About Window Repairs Window Repairs Can Save Homeowners Time and Money

Window repairs can save homeowners time and money. However, there are instances when replacing windows that are old is more economical.

Stray baseballs and thrown projectiles frequently cause holes or cracks in window glass. With the appropriate tools, these are easy fixes.

If the frame of the unit is rotten, it's better to replace the whole unit.

Broken or cracked glass

A bad storm or a stray piece of debris from the lawnmowers, or your favorite vase set down too hard could crack the glass in your windows. You can prevent cracks from getting worse by investing a little more time and effort. This will save you money on replacement glass.

The first step in any repair is to take off the glass pane that has broken. Wearing gloves, carefully cut off any molding, trim or glazing putty holding the glass in the frame. You may have to use a utility knife to remove any glass pieces that are stuck in the frame.

After removing the glass clean the surface and the surrounding areas thoroughly. This will stop the glue that is used to glue the new glass from leaking out and causing more damage. Make sure that the glass you are replacing is a good fit. If the new glass is larger than the old one, you'll need to cut it down with circular saw or miter saw.

After your surface is clean, locate a glass adhesive that's specifically designed for window glass and follow the instructions on how to apply it. Then, you can reinstall the glass in your window sash. Avoid flexing the glass or moving it during this step. This could cause cracks to grow deeper.

You can also use products such as Loctite Super Glue Glass, which will fill the crack and then seal it. It's designed to work on all kinds of glass, including tinted versions. This kind of fix will not completely conceal the crack. It's not suited for windows that are visible from the outside.

Another option is epoxy, which is a bit more time-consuming to apply, but offers the most durable seal and will likely make the cracked window almost invisible. Before applying epoxy you'll need to wash your glass and the surrounding area thoroughly. It is also important be prepared for any unexpected weather changes that could cause the crack to widen and then widen again. If you're not sure of these DIY techniques or if your damaged glass is particularly large or two-paned, it's best to call the professionals.

Sashes that won't open

A window that does not stay up for long can be more than an inconvenience and could be dangerous. Double-hung and single-hung windows come equipped with balancing mechanisms to keep the sash from sliding. However there are times when one or more of these mechanisms could become disconnected or damaged. Examine the pivot bar and balance shoes to see whether one or both have dislodged. If upvc window repairs have, you'll need to replace them for the sash to remain in place.

Moisture can trigger cycles of expansion and contraction in frames of sash windows that are made of timber. This could cause the frame joints to become looser over time and stick. You can repair this problem without removing the window if you use a utility blade to break the frame joints apart. If the wood appears to be swelling, it's usually caused by missing flashing on the exterior of your home that allows water to get into the frame.


A snapped sash cable is another reason for windows that aren't opening. It is possible to reconnect the cord by pulling it back (pliers could be beneficial) and sliding the sash back into its normal position. If the cord is totally damaged, you'll need to replace it.

Paint can also make a window difficult to move. If the sash channel on a double-hung windows is painted shut, you may be in a position to break the bond using a utility blade and sliding it. If this fails then you'll need to remove the sash and then cut the gap between the sash and stop, strip of separation or jamb on both sides of the window (Photo 1).

Sash shoes for single-hung windows can be made from plastic or metal. These shoes have a U shape slot that is locked when the shoe is in the normal position inside the sash. To unlock the shoe using a screwdriver and turn the slot to the side by following the image 2. Then, you can slide the sash upwards and down and check whether the window functions normally.

Rotting Wood

Wood rot isn't just unsightly it's a real danger to the structural integrity of the part of the home it's infiltrating. The fungus responsible for it is a fungus that feeds off moisture and turns wooden beams, walls and joists into a soggy mush. The best way to prevent decay is to ensure your home is maintained and areas that have exposure to the elements are protected. Even if you're vigilant any missed painting session or clogged rain gutter or a minor roof leak could expose your windows or porch columns and other parts of the home to decaying organisms.

The majority of wood decay is the result of excessive moisture content, and can be caused by rainwater seepage, condensation or rising dampness. The latter can occur when a damp-proof course is not installed or damaged or when the internal materials such as plaster and drywall are affected by leaky appliances, pipes and fixtures.

The first step in repairing decay is to remove the old material. This is generally easy enough using a pry bar however a combination of hammer and chisel may be necessary for the most difficult spots. After the rotten pieces wood are removed, the gap must be filled and sealed. There are many wood fillers available and the most effective one will depend on the amount of work you want to complete, the depth of the hole is and how much of the original frame can be preserved.

If the rot is too extensive for a simple filler, then you'll need to replace the damaged area. This can be done by hiring a professional or doing it yourself. This is a more complex project, however, and requires good carpentry skills to complete the task properly. If you are unsure about your DIY skills It is recommended to consult a professional.

Repairing wood that is rotting can be accomplished, but it is much more efficient (and cheaper) to avoid the issue in the first place. Prevention measures include sealing cracks around windows scraping and repainting caulk as well as installing drip edges on the roof to prevent water from splashing onto exterior trim. You should also be looking for signs of an excessive amount of humidity around your window, and consider the use of a dehumidifier to keep the humidity levels under control.

Dirty Seals

Water dripping around or under a window is probably the most obvious sign that seals on windows are shrinking. It's possible to spot, but it's usually hidden behind a wall. This can cause soft wood, mould, and even structural damage to your RV. The best way to safeguard your windows is to perform regular cleaning and inspection checks. Pressing gently against the seal trim and visually examining it can help you find soft spots before they can cause water damage.

Fogged windows are a common indication of a leaky seal. Although they may not cause structural damage or increase your power bill, they can take away from the aesthetics of your RV.

Window seals that fail are mostly caused by weather damage, as the seals expand in hot temperatures, and shrinking in colder ones. This effect can be reduced by storing your camper in a cover and keeping it out of direct sunlight. A simple car wash can aid in preventing salt from causing damage to the rubber seals on your windows.

Another factor that can lead to seal failure is rubbing seals with brushes or washrags that contain cleaning chemicals that degrade the rubber. Seals can become brittle, and more prone to cracking. Avoid using harsh cleaners and keep your window seals and sash tracks tidy with a clean toothbrush.

This is the easiest and cheapest way to protect the windows of your RV. It also gives you the chance to assess the condition of your window seals and make repairs, which can save you from costly future issues.

It's more expensive have your window seals lubricated or replaced using 303 Protectant spray, however it's less expensive than repairing water damage that is caused by faulty sealing. This is a DIY project that will extend the life of the windows in your RV and save you money.