A Step-By Step Guide To Selecting Your Seat Keys Replacement Seat Alhambra Key Problems

Seat's jumbo family MPV is among the best in its class in terms of conserving resale value. And with a brand new model on sale, it's better than ever.


There are a variety of reasons why the key fob could not function properly, such as a dead coin battery water damage to the receiver module or signal interference. This article will walk you through the steps necessary to fix it.

Water Damage

If your seat alhambra keyfob is able to survive washing cycles or a bath in the ocean or pool then it's probably equipped with an amazing waterproof chip. However, do not make it a habit because prolonged exposure to water increases the risk of the key fob being damaged. If the key fob stops working after exposure to clean tap water or rain, then just remove the battery, clean the electronic component with paper towel and allow it to dry completely before putting the battery back into. If the key fob has been exposed to soapy or salty water and salty water, it is recommended you clean the chip using isopropyl or electronic cleaner.

Faulty Receiver Module

If you have tried a new battery for a button and the key fob doesn't lock or unlock then it's likely that your receiver module has found a fault. The positive side is that this is an easy and affordable fix, you can just remove the battery 12 volts for several minutes (first remove the negative cable and then press the horn button a few times) to drain any residual electrical current and then reconnect it in reverse order e.g. Positive cable first, then negative.

ESP Warning Light - If the ESP warning symbol flashes this is normal and means that the car is driving over terrain that has traction issues between the road surface and tyres is not ideal like snow, gravel or lots of surface water. If the ESP warning light continues to be illuminated it indicates that there is a problem within the system. It is best to be diagnosed using a iCarsoft i908 Seat OBD Code Reader kit which will provide you with a specific fault description.

Dead Coin Battery

One of the most common reasons for the seat alhambra key to stop working is a dead battery. seat car key has a tiny button cell battery that keeps it running. It is recommended to replace it with a new one that is the same voltage, size, and specification as the original. When replacing the battery on the key fob, remove all metal clips and ensure that the contacts on the key fob are free of corrosion and clean.

If the key fob was exposed to water (such as soapy tap water), it is recommended that you remove and clean the chip using an electronic cleaner or isopropylethanol prior to installing a new battery. The chip may be permanently damaged by water. If the key fob doesn't work after replacing the battery, it could be necessary to replace the key fob.

Faulty Receiver Module

If your key fob was not working after replacing the battery but it didn't work, or stopped working abruptly your receiver module might have experienced a malfunction. The receiver module is responsible for receiving the radio frequency signals sent by your remote key fob and converting them into electrical commands that are then utilized by other modules in the car.

If the receiver module has developed a fault that prevents it from responding to any of the commands issued by your remote key fob. In this scenario you'll need to visit a dealer for reprogramming the key fob, and also a new receiver module.

The key fob is encased by rubber to block water from getting into the electronic chip. If you immerse the key fob in salty or soapy water, it may damage the chips. If your key fob doesn't work, you could try cleaning the chip with isopropyl or electronic cleaner.

If the keys are successfully paired, but your receiver module is not working, you can try to restart all the electronics on board by disconnecting the battery at 12 volts for few minutes. Then, reconnect the battery in reverse order (negative cable first and then positive). This will reset the on-board electronic circuit and restore their functionality.

Electronic Chip Faulty

The key fob is equipped with tiny electronic chips that transmits a signal to the receiver module whenever the key is used. If the signal doesn't match that stored by the car the immobilizer will stop the engine and stop the vehicle from beginning. If the key fob doesn't work and you aren't able to reprogram it, it could be due to a faulty microchip.

The chip inside the key fob isn't permanent to the device, and might need to be replaced in order to get it to work again. The most effective method for doing this is to remove the key from its housing and using a pin needle to contact each of the metal retaining clips. You will have to replace them when they're damaged or corrosion-prone. Make sure that any replacement batteries have the same voltage, size and specification as the original one.

Seat Alhambra is a well-known and well-designed model, can be troublesome due to certain parts or components. For example there have been reports of owners experiencing problems with the climate control system, which may become faulty and stuck in one particular setting. Similarly, the infotainment system has also been reported to malfunction and freeze screens.