10 Misleading Answers To Common Double Glazing Window Locks Repairs Questions Do You Know Which Answers? Double Glazing Window Locks Repairs

Repairing double glazing window locks is vital to keeping your home safe. The hinges and handles that are not in good condition can let draughts in your home, leaving your windows vulnerable to burglars.

You can, however, repair the stiffness of uPVC locks or handles without replacing your door or window. Often, simply cooling or lubricating the mechanism can resolve any issues.

Broken Glass

Window locks made of double glazing can become worn out over time. When this occurs, the handles may become difficult to open, or even lock shut. This can result in issues with air circulation in the home and can also be a security risk. In order to rectify this issue, it's essential to repair the window as soon as you can.

Double glazed windows are made up of three or two glass panes with gas between them to provide insulation and an elastomer seal that holds the panes in place. Condensation between the glass panes is typically an indication that there is an issue with one of these seals, which needs to be replaced. This usually involves replacing only one pane of the window and is a lot cheaper than replacing the entire window.

A blown seal in windows with double glazing typically results in condensation and cloudiness. This could result from a range of causes, including air leaks or excessive humidity in the home. If you spot the issue, it's crucial to contact a double-glazing expert to replace the seal and gas in your double-glazed windows.

It is possible to replace a single pane of double glazing glass but it is not recommended to do this without the help of a professional. It is important to have the right tools and expertise to perform the task safely. You could end up damaging the window frame or your health if trying to do it yourself.

Many people use a crowbar in order to open their double-glazed windows when it's stuck however, this can result in the window frame being damaged and scratched. A window specialist can remove the handle from your window and open it without causing more damage. They can also convert old window mechanisms into modern ones.

Over time, window hinges get stiffer and more difficult to open, especially if the area is noisy. It is important to regularly grease your window hinges with silicone spray. It is also essential to avoid closing the window heavy or closing it with handles, as this can cause damage to the hinges and lock mechanism.

Broken Sash

This is a frequent issue with older double-glazed windows. It can be difficult to lock and open a window when the upper sash has fallen out of its pocket. This is typically due to pins being disengaged or a balance shoe is disconnected. Each sash is different and therefore it is essential to know how yours is set up prior to trying to fix this.


This can be resolved by removing the sash and thoroughly cleaning it. This will let you know if the sash is still in good alignment. If not, put in stoppers for the sash to secure it. They are available from the internet or in most hardware stores. After cleaning the sash, you can replace the parting bead and lubricate the pulley axles by using Teflon or silicon spray. Label the weights before removing them so that you can put them back in them correctly.

A broken handle is a common problem. It can be hard to determine if your window handle is broken, but there are a few indicators. If the handle feels rigid or difficult to use, or it doesn't feel as if it's securely attached to the wall, then it's broken.

This could be due to an unintentional lack of use, but it's also possible that the handle has cracked or is detached. In certain cases, the handle might be damaged inside and unable to be replaced however it's still worth attempting to fix it when you spot the problem.

To take the window sash off, you may need to take off hinges that attach it to the frame. This is a difficult job, so it's crucial to have someone to hold the sash and ensure it is steady. After you have removed the hinges, it's important to clean them and the surrounding areas. Reattaching the hinges is also a good idea. You can test the handle to check if it functions properly. If it doesn't it, you might want to think about replacing it. This will make your window as secure as is possible.

Broken Handle

The window handle is a delicate piece with intricate mechanisms, and it's not uncommon for these to deteriorate or break in time. It is crucial to repair any broken handles as soon as possible to avoid security and functionality issues.

Fortunately window handles are fairly simple to replace. As opposed to double glazing repairs near me that requires a number of bolts to secure, a window handle is secured by two screws which makes it a straightforward DIY job for anyone with a little of knowledge. Once the new handle has been put in place, it's important to test it to make sure that the mechanisms are working properly. This should include locking the handle and examining for any gaps that could let in drafts or allow criminals to gain access to your home.

The most common cause of the broken handle on a window is simply wear and tear resulting from frequent use. A broken handle can be the result of excessive force or stress. If you force a window to open, it may add additional stress to the handle. This increases the risk of injury.

Other causes of a damaged hand are poor maintenance, aging or design issues. Lack of regular cleaning and lubrication could cause the handle to wear down prematurely, and this is often the result of dirt or other debris that accumulates over time. The handle can be damaged because of improper installation or problems with alignment.

If the solutions mentioned above don't work If these solutions don't work, the Tasker will need to gain access to the lock and remove itself. This could involve taking out the window frame or breaking out the plastic bead and frame (to make room). A new lock can then be fitted which matches the shape of the existing uPVC handle. The new handle can be put back on and the process is completed. If this is the case the Tasker will give a price for the repair costs.

Lock is faulty Lock

It's important that you fix any broken window locks as soon as possible. A damaged window can lead to the door to open, causing draughts and expose your home to burglary. Window lock repair is typically a minor job, but it is better to let an expert tackle the issue before it becomes worse and cost more in the end.

UPVC window locks come with two distinct versions: espagnolette handles and the cockspur handles. The first utilizes an internal rod to operate the cams in a mushroom shape that lock into window frame keepers. The cams of the lock are activated by a handle that is connected to the spindle. The latch of the lock is inserted into the mortise catches on the window frame.

Both types of UPVC window locks are susceptible to damage, particularly in older homes. This could happen when the sash is damaged or misaligned. In some cases, it could even break loose. In these instances, the lock needs to be replaced to avoid draughts as well as loss of efficiency. Tasker can replace the broken lock for you, providing you with assurance that your windows are safe from burglars.

A Tasker will first look at your double glazing window and identify the issue. Once they have all the information they need, they will make their tools ready and then arrive at your home. They'll typically bring a Phillips-head screwdriver, needle-nosepliers, wood putty and fine-grit paper.

If the sash is misaligned the Tasker needs to loosen the screws that hold both pieces of the lock to the frame. They'll then take the latch off and then fill the mounting holes with wood putty (if appropriate) and sand the area until it's flush with the rest of the window frame.

If the lock is rusted they'll clean it with wire brush or oil, and then lubricate it with grease to ensure it's running smoothly. They'll also make sure that the latch is in a good condition and then re-install it.