Why Is There All This Fuss About Mazda Keys Replacement? How to Replace a Mazda Key

Mazda is a brand known for its innovative and intuitive technology. Certain of these systems improve safety or performance while others make driving around East Stroudsburg Easton and Brodheadsville easier.

The key fob is a fantastic example of the latter. It allows you to lock, unlock and start your Mazda by pressing the button. However its battery should be replaced every now and again.

Lost Keys

Keys that are lost or stolen could be a major issue. It is relatively easy to replace the Mazda Key for older models with regular metal keys. However, newer cars require computer chips that are programmable that can only be made by a dealer or locksmith.

To begin, you'll need the VIN for your car. This information is available on the dashboard of the car, on your insurance card or on the car's documentation. Write down this information to give to the locksmith or dealership.

You will need an additional key that is functional. Put the key into the slot and turn on the ignition. Remove the key after approximately five seconds and then turn the ignition off. Repeat this procedure with the second key. Once both keys have been inserted, the new one's computer chip will be linked with your car.

If you have lost your car keys and don't have an extra set, you'll need to tow the vehicle to an auto dealer. Then, you'll have to show proof of ownership and pay for a replacement key. It is possible to wait a few days as the dealer is able to order and pair a replacement key to your car. You can save time and money by having a locksmith replace your key, instead of going to the dealer.

Ignition Cylinder Replacement

The ignition cylinder in your Mazda is the most important component that makes it possible to start your car by using the key. If you're having difficulty turning it over or you are unable insert the key into the switch, your ignition cylinder might need to be replaced.

Ignition-related cylinders can fail more often than keys, which last longer. There is no requirement to adhere to an exact maintenance schedule, but keeping your key clean will ensure it lasts longer.

To replace the ignition cylinder, you must first remove any trim and covers that are blocking the way. Depending on the model, you may need to remove the cover on the steering wheel. You may also have to remove the wiper and accessory switch. Then you'll need a screwdriver or socket wrench to push the release tab on the cylinder. This will free the cylinder from its switch and let it slide out.

Install the new cylinder by connecting the wires to it, tightening the two screws on the top, and replacing the switch. Reconnect the battery, and test that the new cylinder can insert or remove keys. Do this several times, and then reconnect the battery and attempt to start the vehicle to check everything is functioning correctly.

Remote Control Replacement

When your Mazda key remote isn't working, you'll require a professional to get it back in operation. It's not as common as an issue with the ignition cylinder, however, it could leave you stranded. A locksmith will be competent to replace your car key remote, and will also handle all the necessary programming that goes along with it.

The minimum you'll need to supply to locksmiths to allow them to complete this task is the year and model of your Mazda vehicle. This will allow them to gather the appropriate materials and also know whether they'll need to perform any additional key programming for your model of Mazda.

If mazda key fob battery fob isn't turning on, it might have a low battery. The best solution in this case is try to reset the receiver, since this can often bring back functionality. If this does not work, you must replace the batteries. To do this, you'll need to remove the metal key and then use a tape-wrapped flathead screwdriver to open the case on one side, then on the other. After you've done that then, you can insert a new battery into the key fob. Close the case and ensure it's compatible. The RF unit inside your Mazda must be programmed to recognize the new key.

Transponder Chip Replacement

If you have an Mazda key fob or a smart key, chances are that your vehicle has a transponder chips in it. This tiny piece of technology, which is in essence a micro-motherboard, sends an alert to the immobilizer in your car when it's placed in the ignition.

These types of keys are incredibly helpful in terms of security, as they prevent other people from starting your vehicle by ensuring that the only person who is able to start your car is you. This is why it is important be extra cautious to make sure that your key does not get lost or stolen.


Luckily, transponder chips can be replaced by an experienced locksmith. In order to do this, you'll need to remove the cover from the key fob. Usually it's a thin piece of plastic that can be removed with an pliers or screwdriver. Then, you'll need to remove the chip. It should appear like a tiny black square or see-through tube. After you've done this, place the chip onto an adhesive tape and attach it to the ignition lock.

A professional locksmith can complete this task in a flash, and will assist you in getting back on the road in no time. Contact a mobile locksmith when you're having problems with your Mazda key.