almost 2 years her

Now we can say that the Autodesk ACP-01101 exam practice questions are real, valid, and updated as per the Autodesk Certified Professional: AutoCAD for Drafting and Design exam syllabus. So rest assured that with the Autodesk ACP-01101 Exam Practice test questions you can ace your exam preparation quickly and be ready to perform well in the final Autodesk ACP-01101 certification exam. Our ACP-01101 study materials are full of useful knowledge, which can meet your requirements of improvement. Also, it just takes about twenty to thirty hours for you to do exercises of the Autodesk ACP-01101 Study Guide. The learning time is short but efficient. You will elevate your ability in the shortest time with the help of our Autodesk ACP-01101 preparation questions. >> Practice ACP-01101 Online <<

Specifications of ACP-01101 Practice Exam Software

The most important is that you just only need to spend 20 to 30 hours on practicing ACP-01101 exam questions before you take the exam, therefore you can arrange your time to balance learning and other things. Of course, you care more about your test pass rate. We offer you more than 99% pass guarantee if you are willing to use our ACP-01101 Test Guide and follow our plan of learning. And if you want to pass the ACP-01101 exam, you should choose our ACP-01101 torrent prep to help you. And We will update ACP-01101 learning materials to make sure you have the latest questions and answers.

Autodesk Certified Professional: AutoCAD for Drafting and Design Sample Questions (Q11-Q16):

NEW QUESTION # 11
What should be typed at the command line in order to start creating a line for drawing reference that starts at a defined point and extends to infinity in the designated direction?

• A. CURSORSIZE
• B. MLINE
• C. XLINE
• D. RAY

Answer: C Explanation:
Explanation
According to the AutoCAD for Design and Drafting documents1, the command that should be typed at the command line in order to start creating a line for drawing reference that starts at a defined point and extends to infinity in the designated direction is XLINE2. This command creates a construction line, which is a type of reference line that can help you manage accurate parameters of your drawing2. You can also use point objects as nodes or reference geometry for object snaps and relative offsets3.
NEW QUESTION # 12
Refer to the exhibit.

This section view was dimensioned using Baseline Dimensions The dimensions are too close together which impacts the drawing's legibility. What is the most efficient method to avoid this problem in the future?

• A. Dimension Style Manager
• B. Copy and Paste
• C. Move
• D. Grip Edit

Answer: A Explanation:
Explanation
a baseline dimension is a linear, angular, or ordinate dimension that is measured from the baseline of a previous or selected dimension. The spacing between baseline dimensions can be set from the Dimension Style Manager, Lines tab, Baseline Spacing (DIMDLI system variable).
The most efficient method to avoid the problem of dimensions being too close together in the future is to use Dimension Style Manager. This will allow you to change the default spacing for all baseline dimensions in your drawing.
https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2015/ENU/AutoCAD
NEW QUESTION # 13

You have a line segment that is 150 units long as shown in the exhibit.
You need the line to be 200 units long without adding any additional linework. The leftmost end of the line must remain in the current position.
What should you do?

• A. From the Project option of the Extend command, enter 50 units, and then select the right end of the line.
• B. From the Edge Extension option of the Extend command, enter 50 units, and then select the right end of the line
• C. From the Delta option of the Lengthen command, enter 50! units and then select the right end of the line
• D. From the Delta option of the Lengthen command, enter 200 units and then select the right end of the line

Answer: C Explanation:
Explanation
From the Delta option of the Lengthen command, enter 50 units and then select the right end of the line. This way, you can increase the length of the line by 50 units from its current endpoint without changing its direction or position2
https://www.learnvern.com/autocad-tutorial-in-hindi/how-to-use-lengthen-command
NEW QUESTION # 14
You have the office arrangement shown in exhibit 1. (Refer to the exhibit 1 tab.)

You need a mirror line to create the right-hand office arrangement shown in exhibit 2. (Refer to the exhibit 2 tab.)

Which tool would you use to make sure the mirror line is centered between the two wall lines without adding additional linework?

• A. Mid Between Two Points (M2P)
• B. Endpoint (END)
• C. Intersection (INT)
• D. Midpoint (MID)

Answer: A Explanation:
Explanation
https://www.tutorial-autocad.com/mirror-command
http://docs.autodesk.com/ACD/2011/ENU/filesMDG/WS1a9193826455f5ff2566ffd511ff6f8c7ca-3f53.htm
NEW QUESTION # 15
You have the drawing shown in the exhibit.

You need to place the polygon and the rectangle on the same layer as the circle.
Which command should you use to complete the task in the least number of steps?

• A. Match Properties
• B. ByLayer
• C. Copy
• D. Make Current (LAYMCUR)

Answer: A Explanation:
Explanation
match properties is a command that allows you to apply the properties of one object to another object. You can use this command to change the layer of an object by selecting an object on the desired layer as a source.
To use this command, you can either:
* Click on the Match Properties icon in the Properties panel of the Home tab.
* Type MATCHPROP at the command prompt and press Enter.
Then, you can follow these steps:
* Select an object on the same layer as the circle as a source object and press Enter.
* Select the polygon and the rectangle as destination objects and press Enter.
Now you have placed the polygon and the rectangle on the same layer as the circle.
NEW QUESTION # 16
...... You can set time to test your study efficiency, so that you can accomplish your test within the given time when you are in the real ACP-01101 exam. Moreover, you can adjust yourself to the exam speed and stay alert according to the time-keeper that we set on our ACP-01101 training materials. Therefore, you can trust on our ACP-01101 Study Guide for this effective simulation function will eventually improve your efficiency and assist you to succeed in the ACP-01101 exam. Just have a try on our free demo of ACP-01101 exam questions! Dumps ACP-01101 Cost: https://www.dumpsfree.com/ACP-01101-valid-exam.html ACP-01101 certifications are popular by many aspiring workers, Autodesk Practice ACP-01101 Online All contents are passing rigid inspection, With these two Autodesk Certified Professional: AutoCAD for Drafting and Design ACP-01101 practice exams, you will get the actual Autodesk ACP-01101 exam environment, It is highly recommended for you to use ACP-01101 brain dumps multiple times and in different modes so you can strengthen your current preparation level, When you use ACP-01101 learning guide, we hope that you can feel humanistic care while acquiring knowledge. Most people can agree on a beautiful proportion, The advantage (https://www.dumpsfree.com/ACP-01101-valid-exam.html) here is that the filter blocks light in one part of the scene while allowing full exposure in another. ACP-01101 certifications are popular by many aspiring workers, All contents are passing rigid inspection, With these two Autodesk Certified Professional: AutoCAD for Drafting and Design ACP-01101 practice exams, you will get the actual Autodesk ACP-01101 exam environment.

What is the Reason to Trust on Autodesk ACP-01101 Exam Questions?

It is highly recommended for you to use ACP-01101 brain dumps multiple times and in different modes so you can strengthen your current preparation level, When you use ACP-01101 learning guide, we hope that you can feel humanistic care while acquiring knowledge.