over 1 year her

P.S. Free & New 300-410 dumps are available on Google Drive shared by ITPassLeader: https://drive.google.com/open?id=1qBJGKYvQA9QvjYSI_-ySc3rtdFjvDJaJ Did you often feel helpless and confused during the preparation of the exam? Do you want to find an expert to help but feel bad about the expensive tutoring costs? Don't worry. 300-410 learning materials can help you to solve all the problems. 300-410 learning material always regards helping students to pass the exam as it is own mission. With 300-410 learning materials, you only need to pay half the money to get the help of the most authoritative experts. Moreover, we offer free Cisco 300-410 exam questions updates if the 300-410 actual test content changes within 12 months of your buying. Our 300-410 guide questions have helped many people obtain an international certificate. In this industry, our products are in a leading position in all aspects. >> 300-410 Exam Assessment <<

Professional 300-410 Exam Assessment & Leader in Qualification Exams & First-Grade Cisco Implementing Cisco Enterprise Advanced Routing and Services

For candidates who are going to attend the exam, some practice is necessary, for the practice can build up the confidence. 300-410 exam torrent of us can help you pass the exam successfully. 300-410 exam braindumps are edited by professional experts, and the quality can be guaranteed. In addition, 300-410 exam materials cover most knowledge points for the exam, and you can master the major knowledge points for the exam, therefore your confidence for the exam will be strengthened. We provide you with free demo for you to have a try before buying 300-410 Exam Braindumps, so that you can know what the complete version is like.

What Job Opportunities Await Those Certified?

As long as the Cisco CCNP Enterprise is one of the most rewarding certifications out there for computer networking professionals, earning it is a huge plus point that immediately highlights a job-seeker from the rest of the crowd. Being CCNP Enterprise accredited is not only about having a nice certificate to hang on your wall or link in your LinkedIn profile for the world to see. It is also about how competent you have become in performing the more serious, harder tasks of networking that put a company's entire networking infrastructure on your shoulders.

Cisco Implementing Cisco Enterprise Advanced Routing and Services Sample Questions (Q38-Q43):

NEW QUESTION # 38
Drag and drop the addresses from the left onto the correct IPv6 filter purposes on the right.
Answer: ** Explanation:

NEW QUESTION # 39**
Refer to the exhibit.


The network administrator configured the network to establish connectivity between all devices and notices that the ASBRs do not have routes for each other. Which set of configurations resolves this issue?

• A. Option D
• B. Option B
• C. Option C
• D. Option A

Answer: A
NEW QUESTION # 40
Exhibit:

Bangkok is using ECMP to reach to the 192.168.5.0/24 network. The administrator must configure Bangkok in such a way that Telnet traffic from 192.168.3.0/24 and192.168.4.0/24 networks uses the HongKong router as the preferred router. Which set of configurations accomplishes this task?

• A. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
  !
  route-map PBR1 permit 10
  match ip address 101
  set ip next-hop 172.18.1.2
  !
  interface Ethernet0/3
  ip policy route-map PBR1
• B. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
  !
  route-map PBR1 permit 10
  match ip address 101
  set ip next-hop 172.18.1.2
  interface Ethernet0/1
  ip policy route-map PBR1
• C. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255
  !
  route-map PBR1 permit 10
  match ip address 101
  set ip next-hop 172.18.1.2
  interface Ethernet0/3
  ip policy route-map PBR1
• D. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255
  !
  route-map PBR1 permit 10
  match ip address 101
  set ip next-hop 172.18.1.2
  !
  interface Ethernet0/1
  ip policy route-map PBR1

Answer: A Explanation:
Explanation
We need to use Policy Based Routing (PBR) here on Bangkok router to match the traffic from 192.168.3.0/24
& 192.168.4.0/24 and "set ip next-hop" to HongKong router(172.18.1.2 in this case).
Note: Please notice that we have to apply the PBR on incoming interface e0/3 to receive traffic from
192.168.3.0/24 and 192.168.4.0/24.
NEW QUESTION # 41
Refer to the exhibit.

Which command must be configured to make VRF CCNP work?

• A. interface Loopback0
  ip address 10.1.1.1 255.255.255.0
  ip vrf forwarding CCNP
• B. interface Loopback0
  ip address 10.1.1.1 255.255.255.0
  vrf forwarding CCNP
• C. interface Loopback0
  vrf forwarding CCNP
• D. interface Loopback0
  ip address 10.1.1.1 255.255.255.0

Answer: D
NEW QUESTION # 42
Drag and drop the OSPF adjacency states from the left onto the correct descriptions on the right.
Answer: ** Explanation:

Explanation
DownThis is the first OSPF neighbor state. It means that no information (hellos) has been received from this neighbor, but hello packets can still be sent to the neighbor in this state.
During the fully adjacent neighbor state, if a router doesn't receive hello packet from a neighbor within the Router Dead Interval time (RouterDeadInterval = 4*HelloInterval by default) or if the manually configured neighbor is being removed from the configuration, then the neighbor state changes from Full to Down.
AttemptThis state is only valid for manually configured neighbors in an NBMA environment. In Attempt state, the router sends unicast hello packets every poll interval to the neighbor, from which hellos have not been received within the dead interval.
InitThis state specifies that the router has received a hello packet from its neighbor, but the receiving router's ID was not included in the hello packet. When a router receives a hello packet from a neighbor, it should list the sender's router ID in its hello packet as an acknowledgment that it received a valid hello packet.
2-WayThis state designates that bi-directional communication has been established between two routers.
Bi-directional means that each router has seen the other's hello packet. This state is attained when the router receiving the hello packet sees its own Router ID within the received hello packet's neighbor field. At this state, a router decides whether to become adjacent with this neighbor. On broadcast media and non-broadcast multiaccess networks, a router becomes full only with the designated router (DR) and the backup designated router (BDR); it stays in the 2-way state with all other neighbors. On Point-to-point and Point-to-multipoint networks, a router becomes full with all connected routers.
At the end of this stage, the DR and BDR for broadcast and non-broadcast multiacess networks are elected.
For more information on the DR election process, refer to DR Election.
Note: Receiving a Database Descriptor (DBD) packet from a neighbor in the init state will also a cause a transition to 2-way state.
ExstartOnce the DR and BDR are elected, the actual process of exchanging link state information can start between the routers and their DR and BDR. (ie. Shared or NBMA networks).
In this state, the routers and their DR and BDR establish a master-slave relationship and choose the initial sequence number for adjacency formation. The router with the higher router ID becomes the master and starts the exchange, and as such, is the only router that can increment the sequence number. Note that one would logically conclude that the DR/BDR with the highest router ID will become the master during this process of master-slave relation. Remember that the DR/BDR election might be purely by virtue of a higher priority configured on the router instead of highest router ID. Thus, it is possible that a DR plays the role of slave. And also note that master/slave election is on a per-neighbor basis.
ExchangeIn the exchange state, OSPF routers exchange database descriptor (DBD) packets. Database descriptors contain link-state advertisement (LSA) headers only and describe the contents of the entire link-state database. Each DBD packet has a sequence number which can be incremented only by master which is explicitly acknowledged by slave. Routers also send link-state request packets and link-state update packets (which contain the entire LSA) in this state. The contents of the DBD received are compared to the information contained in the routers link-state database to check if new or more current link-state information is available with the neighbor.
LoadingIn this state, the actual exchange of link state information occurs. Based on the information provided by the DBDs, routers send link-state request packets. The neighbor then provides the requested link-state information in link-state update packets. During the adjacency, if a router receives an outdated or missing LSA, it requests that LSA by sending a link-state request packet. All link-state update packets are acknowledged.
FullIn this state, routers are fully adjacent with each other. All the router and network LSAs are exchanged and the routers' databases are fully synchronized.
Full is the normal state for an OSPF router. If a router is stuck in another state, it is an indication that there are problems in forming adjacencies. The only exception to this is the 2-way state, which is normal in a broadcast network. Routers achieve the FULL state with their DR and BDR in NBMA/broadcast media and FULL state with every neighbor in the remaining media such as point-to-point and point-to-multipoint.
Note: The DR and BDR that achieve FULL state with every router on the segment will display FULL/DROTHER when you enter the show ip ospf neighbor command on either a DR or BDR. This simply means that the neighbor is not a DR or BDR, but since the router on which the command was entered is either a DR or BDR, this shows the neighbor as FULL/DROTHER.
NEW QUESTION # 43
...... The reason behind our confidence is the hard work of our professionals. We have hired a team who analyze past papers, Cisco Implementing Cisco Enterprise Advanced Routing and Services Exam examination syllabus and add the most probable Cisco 300-410 exam questions in three easy-to-use formats. These formats include 300-410 Pdf Dumps file, web-based Implementing Cisco Enterprise Advanced Routing and Services practice test, and desktop practice exam software. Keep reading to find the specifications of our 300-410 exam practice material's three formats. **Sample 300-410 Questions Answers: https://www.itpassleader.com/Cisco/300-410-dumps-pass-exam.html P.S. Free 2023 Cisco 300-410 dumps are available on Google Drive shared by ITPassLeader: https://drive.google.com/open?id=1qBJGKYvQA9QvjYSI_-ySc3rtdFjvDJaJ