Foren » Discussions » 시험패스가능한350-401퍼펙트공부문제덤프데모다운로드

gywudosu
Avatar

DumpTOP에서 Cisco 350-401 덤프를 다운받아 공부하시면 가장 적은 시간만 투자해도Cisco 350-401시험패스하실수 있습니다. DumpTOP에서Cisco 350-401시험덤프를 구입하시면 퍼펙트한 구매후 서비스를 제공해드립니다. Cisco 350-401덤프가 업데이트되면 업데이트된 최신버전을 무료로 제공해드립니다. 시험에서 불합격성적표를 받으시면 덤프구매시 지불한 덤프비용은 환불해드립니다. Cisco인증 350-401시험패스 공부방법을 찾고 있다면 제일 먼저DumpTOP를 추천해드리고 싶습니다. Cisco인증 350-401시험이 많이 어렵다는것은 모두 알고 있는 것입니다. DumpTOP에서 출시한 Cisco인증 350-401덤프는 실제시험을 대비하여 연구제작된 멋진 작품으로서 Cisco인증 350-401시험적중율이 최고입니다. Cisco인증 350-401시험패스를 원하신다면DumpTOP의 제품이 고객님의 소원을 들어줄것입니다. >> 350-401퍼펙트 공부문제 <<

시험대비 350-401퍼펙트 공부문제 덤프 최신버전

DumpTOP의 Cisco인증 350-401덤프로 시험공부를 하신다면 고객님의 시간은 물론이고 거금을 들여 학원등록하지 않아도 되기에 금전상에서도 많은 절약을 해드리게 됩니다. Cisco인증 350-401덤프 구매의향이 있으시면 무료샘플을 우선 체험해보세요.

Cisco 350-401 시험요강:

주제 소개
주제 1
  • Describe The Components Of Network Security Design
  • Configure And Verify Device Access Control
주제 2
  • Network Access Control With 802.1X, MAB, And Webauth
  • Diagnose Network Problems Using Tools Such As Debugs, Conditional Debugs
주제 3
  • Explain The Working Principles Of The Cisco SD-Access Solution
  • Explain The Different Design Principles Used In An Enterprise Network
주제 4
  • Differentiate Between On-Premises And Cloud Infrastructure Deployments
  • Describe Concepts Of Wired And Wireless Qos
주제 5
  • Configure And Verify Common Spanning Tree Protocols (RSTP And MST)
  • Troubleshoot Static And Dynamic 802.1q Trunking Protocols
주제 6
  • Configure And Verify Infrastructure Security Features
  • Configure And Verify Wireless Security Features
주제 7
  • Configure And Verify Netflow And Flexible Netflow
  • Configure And Verify SPAN
  • RSPAN
  • ERSPAN
주제 8
  • Configure And Verify NETCONF And RESTCONF
  • Configure And Verify Device Monitoring Using Syslog For Remote Logging
주제 9
  • Differentiate Hardware And Software Switching Mechanisms
  • Explain The Working Principles Of The Cisco SD-WAN Solution
주제 10
  • Describe Device Virtualization Technologies
  • Describe Network Virtualization Concepts
  • SD-Access Control And Data Planes Elements
주제 11
  • Authentication And Authorization Using AAA
  • Describe REST API Security
  • Lines And Password Protection
주제 12
  • Configure And Verify NAT
  • PAT
  • Describe Cisco DNA Center Workflows To Apply Network Configuration, Monitoring, And Management
주제 13
  • Enterprise Network Design Such As Tier 2, Tier 3, And Fabric Capacity Planning
  • SD-WAN Control And Data Planes Elements
주제 14
  • Describe Network Time Protocol (NTP)
  • Describe Multicast Protocols, Such As PIM And IGMP V2
  • V3
주제 15
  • Describe The Main Principles And Use Cases For Layer 2 And Layer 3 Roaming
  • Troubleshoot Static And Dynamic Etherchannels

최신 CCNP Enterprise 350-401 무료샘플문제 (Q405-Q410):

질문 # 405
Drag and drop the LISP components on the left to their descriptions on the right. Not all options are used.
정답： 설명：


질문 # 406
Refer to the exhibit.

A network engineer is configuring OSPF between router R1 and router R2. The engineer must ensure that a DR/BDR election does not occur on the Gigabit Ethernet interfaces in area 0. Which configuration set accomplishes this goal?

  • A.
  • B.
  • C.
  • D.

정답：C 설명：
Broadcast and Non-Broadcast networks elect DR/BDR while Point-topoint/
multipoint do not elect DR/BDR. Therefore we have to set the two Gi0/0
interfaces to point-to-point or point-to-multipoint network to ensure that a DR/BDR
election does not occur.
질문 # 407
Which NGFW mode block flows crossing the firewall?

  • A. Passive
  • B. Inline tap
  • C. Inline
  • D. Tap

정답：C 설명：
Explanation:Firepower Threat Defense (FTD) provides six interface modes which are: Routed, Switched, Inline Pair, Inline Pair with Tap, Passive, Passive (ERSPAN). When Inline Pair Mode is in use, packets can be blocked since they are processed inline When you use Inline Pair mode, the packet goes mainly through the FTD Snort engine When Tap Mode is enabled, a copy of the packet is inspected and dropped internally while the actual traffic goes through FTD unmodified
질문 # 408
What is the structure of a JSON web token?

  • A. header and payload
  • B. three parts separated by dots header payload, and signature
  • C. three parts separated by dots version header and signature
  • D. payload and signature

정답：B 설명：
JSON Web Token (JWT) is an open standard (RFC 7519) that defines a compact and self- contained way for securely transmitting information between parties as a JSON object. This information can be verified and trusted because it is digitally signed. JWTs can be signed using a secret (with the HMAC algorithm) or a public/private key pair using RSA or ECDSA.
JSON Web Tokens are composed of three parts, separated by a dot (.): Header, Payload, Signature. Therefore, a JWT typically looks like the following:
xxxxx.yyyyy.zzzzz
The header typically consists of two parts: the type of the token, which is JWT, and the signing algorithm being used, such as HMAC SHA256 or RSA.
The second part of the token is the payload, which contains the claims. Claims are statements about an entity (typically, the user) and additional data.
To create the signature part you have to take the encoded header, the encoded payload, a secret, the algorithm specified in the header, and sign that.
Reference: https://jwt.io/introduction/
질문 # 409
Drag and drop the characteristics from the left onto the orchestration tools they describe on the right.
정답： 설명：


질문 # 410
...... IT업계에 종사하는 분이라면 국제적으로 인정받는 IT인증시험에 도전하여 자격증을 취득하셔야 합니다. DumpTOP의 Cisco인증 350-401덤프는 이 시험에 참가한 IT인사들의 검증을 받은 최신 시험대비 공부자료입니다. DumpTOP의 Cisco인증 350-401덤프로 시험을 쉽게 패스하여 자격증을 취득하면 승진이나 연봉인상에 많은 편리를 가져다드립니다. 저희는 항상 여러분들의 곁을 지켜줄것입니다. 350-401높은 통과율 덤프공부자료: https://www.dumptop.com/Cisco/350-401-dump.html