Foren » Discussions » 300-620 Aktuelle Prüfung - 300-620 Prüfungsguide & 300-620 Praxisprüfung

gywudosu
Avatar

Machen Sie noch Sorge um die schweren Cisco 300-620 Zertifizierungsprüfungen? Seien Sie nicht mehr besorgt! Unser Pass4Test bietet Ihnen die Testfragen und Antworten von Cisco 300-620 Zertifizierungsprüfung, die von den IT-Experten durch Experimente und Praxis erhalten werden und über IT-Zertifizierungserfahrungen über 10 Jahre verfügt. Die Testaufgaben und Antworten von Cisco 300-620 Zertifizierungsprüfung aus Pass4Test sind zur Zeit das gründlichste, das genauste und das neueste Produkt auf dem Markt. Um unsere Pass4Test eine der zuverlässigen Merken im Gebiet der IT zu werden, bieten wir Sie die vollständigsten und die neusten Prüfungsaufgaben der Cisco 300-620. Mit Hilfe unserer Softwaren bestanden fast alle Käufer Cisco 300-620, die als eine sehr schwere Prüfung gilt, mit Erfolg. Deshalb haben wir Konfidenz, Ihnen unseren Produkten zu empfehlen. Wir können noch garantieren, falls Sie die Cisco 300-620 mit Hilfe unserer Software noch nicht bestehen, geben wir Ihnen die volle Gebühren zurück. Alles in allem hoffen wir, dass Sie sich beruhigt vorbereiten. >> 300-620 Online Test <<

Neuester und gültiger 300-620 Test VCE Motoren-Dumps und 300-620 neueste Testfragen für die IT-Prüfungen

Alle IT-Fachleute sind mit der Cisco 300-620 Zertifizierungsprüfung vertraut. Sie alle träumen davon, ein Zertifikat zu bekommen. Sie können Ihren Traum verwirklichen und eine gute Berufskarriere machen. Durch die Schulungsunterlagen zur Cisco 300-620 Zertifizierungsprüfung von Pass4Test können Sie bekommen, was Sie wollen.

Cisco 300-620 Prüfungsplan:

Thema Einzelheiten
Thema 1
  • Implement Bridge Domain Configuration
  • Describe ACI Object Model

Thema 2
  • Utilize Syslog And Snmp Services
  • Implement ACI Logical Constructs

Thema 3
  • Describe Endpoint Learning
  • Utilize Syslog And Snmp Services

Thema 4
  • Implement Configuration Backup (Snapshot
  • Config Import Export)
  • ACI Packet Forwarding

Thema 5
  • External Network Connectivity
  • Implement ACI Policies

Thema 6
  • Implement Out-Of-Band And In-Band
  • Configure An Upgrade

Thema 7
  • Bridge Domain (Unicast Routing, Layer 2 Unknown Hardware Proxy, ARP Flooding)
  • Implement Layer 2 Out (STP
  • MCP Basics)

Thema 8
  • Implement Vmware Vcenter DVS Integration
  • Describe ACI Fabric Discovery

Thema 9
  • Implement Service Graph (Managed And Unmanaged)
  • Describe ACI Topology And Hardware

Thema 10
  • Describe Resolution Immediacy In VMM
  • Implement Layer 3 Out (Excludes Transit Routing And VRF Route Leaking)


Cisco Implementing Cisco Application Centric Infrastructure 300-620 Prüfungsfragen mit Lösungen (Q129-Q134):

129. Frage
Refer to the exhibit.

When the subnet is configured on a bridge domain, on which physical devices is the gateway IP address configured?

  • A. all leaf switches and all spine nodes
  • B. only leaf switches where the bridge domain of the tenant is present
  • C. only spine switches where the bridge domain of the tenant is present
  • D. all border leaf nodes where the bridge domain of the tenant is present

Antwort: B Begründung:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/OperatingACI/guide/bCiscoOperatingACI/bCiscoOperatingACIchapter_0111.html

130. Frage
An engineer must allow multiple external networks to communicate with internal ACI subnets. Which action should the engineer take to assign the prefix to the class ID of the external Endpoint Group?

  • A. Enable the Export Route Control Subnet for the External Endpoint Group flag.
  • B. Configure subnets with the External Subnets for External EPG flag enabled.
  • C. Configure subnets with the Import Route Control Subnet flag enabled.
  • D. Enable an L30ut with Shared Route Control Subnet.

Antwort: B Begründung:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACIBestPractices/bACIBestPractices/bACIBestPracticeschapter01001.html

131. Frage
The existing network and ACI fabric have been connected to support workload migration. Servers will physically terminate at the Cisco ACI, but their gateway must stay in the existing network. The solution needs to adhere to Cisco's best practices. The engineer started configuring the relevant Bridge Domain and needs to complete the configuration. Which group of settings are required to meet these requirements?

  • A. L2 Unknown Unicast: Flood
    L3 Unknown Multicast Flooding: Flood
    Multi Destination Flooding: Flood in BD
    ARP Flooding: Enable
  • B. L2 Unknown Unicast: Hardware Proxy
    L3 Unknown Multicast Flooding: Optimize Flood
    Multi Destination Flooding: Flood in BD
    ARP Flooding: Disable
  • C. L2 Unknown Unicast: Flood
    L3 Unknown Multicast Flooding: Optimize Flood
    Multi Destination Flooding: Flood in BD
    ARP Flooding: Disable
  • D. L2 Unknown Unicast: Hardware Proxy
    L3 Unknown Multicast Flooding: Flood
    Multi Destination Flooding: Flood in BD
    ARP Flooding: Enable

Antwort: A
132. Frage
An engineer must deploy Cisco ACI across 10 geographically separated data centers. Which ACI site deployment feature enables the engineer to control which bridge domains contain Layer 2 flooding?

  • A. Multi-Pod
  • B. Multi-Site
  • C. GOLF
  • D. Stretched Fabric

Antwort: B Begründung:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/acimulti-site/sw/2x/fundamentals/Cisco-ACI-Multi-Site-Fundamentals-Guide-211/Cisco-ACI-Multi-Site-Fundamentals-Guide-211chapter011.html#id51188 From the web page, we see that multi-site has control over:
Stretched Bridge Domain with Layer 2 Broadcast Extension.
Stretched Bridge Domain with no Layer 2 Broadcast Extension.
133. Frage
An engineer is configuring a VRF for a tenant named Cisco. Drag and drop the child objects on the left onto the correct containers on the right for this configuration.
Antwort: ** Begründung:

134. Frage
...... Wollen Sie an Cisco 300-620 Zertifizierungsprüfung teilnehmen? Sorgen Sie sich um diese Prüfung? Wünschen Sie sich an der 300-620 Prüfung melden aber Fürchten Sie Misserfolg an dieser Prüfung? Das macht nichts, melden Sie getrost an. Wenn Sie Pass4Test Prüfungsunterlagen benutzen, sind keine Probleme in Ihrer Prüfung vorhanden. Obwohl Sie keine Zuversicht dieser Prüfung haben, können Sie einmal diese Prüfung bestehen, wenn Sie 300-620 Dumps von Pass4Test benutzen. Glauben Sie nicht? Kommen Sie bitte zu Pass4Test und Informieren Sie sich. Außerdem können Sie einen Teil der Cisco 300-620 Dumps probieren. Damit können Sie finden, dass die Prüfungsunterlagen die Garantie für den Erfolg der Cisco 300-620 Prüfung sind. **300-620 Ausbildungsressourcen
: https://www.pass4test.de/300-620.html