over 1 year her

What's more, part of that RealExamFree 300-420 dumps now are free: https://drive.google.com/open?id=1rL891ELkbf9YhpJwCvQ-MBmTCVVmKBB6 Some customers might worry that passing the exam is a time-consuming process. Now our 300-420 actual test guide can make you the whole relax down, with all the troubles left behind. Involving all types of questions in accordance with the real exam content, our 300-420 exam questions are compiled to meet all of your requirements. The comprehensive coverage would be beneficial for you to pass the exam. Only need to spend about 20-30 hours practicing our 300-420 study files can you be fully prepared for the exam. With deeply understand of core knowledge 300-420 actual test guide, you can overcome all the difficulties in the way. So our 300-420 exam questions would be an advisable choice for you. On the final Designing Cisco Enterprise Networks 300-420 exam day, you will feel confident and perform better in the Designing Cisco Enterprise Networks 300-420 certification test. 300-420 authentic dumps come in three formats: Cisco 300-420 pdf questions formats, Web-based and desktop 300-420 practice test software are the three best formats of RealExamFree 300-420 Valid Dumps. 300-420 pdf dumps file is the more effective and fastest way to prepare for the 300-420 exam. Cisco PDF Questions can be used anywhere or at any time. You can download 300-420 dumps pdf files on your laptop, tablet, smartphone, or any other device. >> 300-420 New Learning Materials <<

300-420 Guide Torrent - 300-420 Valid Test Test

As job seekers looking for the turning point of their lives, it is widely known that the workers of recruitment is like choosing apples---viewing resumes is liking picking up apples, employers can decide whether candidates are qualified by the 300-420 appearances, or in other words, candidates’ educational background and relating 300-420 professional skills. The reason why we are so confident lies in the sophisticated expert group and technical team we have, which do duty for our solid support. They develop the 300-420 Exam Guide targeted to real exam. The wide coverage of important knowledge points in our 300-420 latest braindumps would be greatly helpful for you to pass the exam.

Cisco 300-420: Skills outline

Cisco 300-420 is a certification test that evaluates the individuals’ understanding of a wide range of knowledge areas. The skills measured in this exam are combined in various objectives, which are enumerated below:

• WAN for Enterprise Networks (20%)This area evaluates one’s skills and knowledge of building frameworks, which make network communication resources and services available to end-users and systems. The questions under this objective also require that the students be able to compare WAN connectivity options, design site-to-site VPN, and design Cisco SD-WAN architecture. It is also important to know about failover, backup connectivity, multihomed, and single-homed.
• Network Services (20%)To answer the questions in this topic, the individuals should be able to demonstrate that they have the relevant knowledge and are capable of selecting and employing the most appropriate quality strategies, which will help meet the customer’s requirements. Other skills under this section include describing network management techniques, designing multicast services (MSDP, SSM, PIM bidirectional), and describing multicast routing concepts (RPF, source trees, shared trees, and rendezvous points).
• Advanced Addressing and Routing Solutions (25%)Within this topic, the applicants are required to demonstrate their knowledge of advanced addressing & routing solutions. This means that they need to be well conversant with creating stable, scalable, and secure routing designs for different routing protocols, including EIGRP, IS-IS, OSPF, and BGP. They should also be conversant with IPv6 migration strategies that include Boundaries, Native, and Overlay.
• Automation (10%)This domain is all about testing the applicants on their knowledge of various data model sets that enable service providers to effectively and actively manage the networks of their end-users. In the framework of this subject, they need to demonstrate their competency in comparing dial-in and dial-out approaches to model-driven telemetry, describing the effect of model-driven telemetry on the network, differentiating between RESTCONF and NETCONF, choosing the right YANG data model set according to the requirements and choosing the right QoS strategies to meet the requirements of a customer.
• Advanced Enterprise Campus Networks (25%)In the framework of this knowledge area, the learners are expected to show their competency in designing campus networks for high availability, designing campus Layer 2 and multicampus Layer 3 infrastructures. The potential candidates should also know about SD-Access architecture and SD-Access fabric design considerations for both wired and wireless access.

Cisco Designing Cisco Enterprise Networks Sample Questions (Q84-Q89):

NEW QUESTION # 84
Drag and drop the properties from the left onto the Cisco SD-WAN components that perform them on the right.
Answer: ** Explanation:

NEW QUESTION # 85**
Which two border nodes are available in the Cisco SD-Access architecture? (Choose two.)

• A. edge border
• B. anywhere border
• C. intermediate border
• D. internal border
• E. extended border

Answer: B,E Explanation:
Section: Advanced Enterprise Campus Networks
NEW QUESTION # 86
Refer to the exhibit.

An architect must design an IPv6 migration solution for an enterprise customer to support these requirements:
* Clients will transition to the new IPv6 network, which provides NAT64 and IPv6 DNS resolution services, using the same DNS name that points to the IPv4 address.
* The service provider will create a client-facing IPv6 interface with a new IPv6 virtual address that points to the same IPv4 DNS server.
* The service provider will support clients that use global IPv6 addresses and encapsulate IPv4 packets into IPv6 tunnels.
Which two migration solutions must the architect choose? (Choose two.)

• A. Use NAT44/64 from the devices to the core MPLS network.
• B. Use NAT44/64 from the MPLS network to the IGR.
• C. Use dual-stack lite from the MPLS network to the IGR.
• D. Use dual-stack lite from the devices to the core MPLS network.
• E. Use IPv6 tunneling from the devices to the core MPLS network.

Answer: B,D
NEW QUESTION # 87
Drag and drop the description from the left onto the corresponding WAN connectivity types and categories on the right.
Answer: ** Explanation:

NEW QUESTION # 88**
Instructions
The main screen consists of two parts; the Main scenario and the Topology tabs. The main scenario describes TSHOOT.com test bed. The Topology tabs allow you to display the appropriate and select the trouble ticket.
To complete the item, you will first need to familiarize yourself with the TSHOOT.com test bed by clicking on the master scenario first and then the topologies tabs. Once you are familiar with the test bed and the topologies, you should start evaluating the trouble ticket. You will be presented with a Trouble Ticket scenario that will describe the fault condition. You will need to determine on which device the fault condition is located, to which technology the fault condition is related, and the solution to each trouble ticket. This will be done by answering three questions.
Ticket Selection
To begin, click on the Ticket on the Topology tabs.
Please note. Some of the questions will require you to use the scroll bar to see all options.
Fault Isolation
Read the ticket scenario to understand the fault condition.
Open the appropriate topology, based upon the ticket scenario.
Open the console of the desired device by clicking on that device in the topology, based upon your troubleshooting methodology.
Use the supported show, ping and trace commands to begin your fault isolation process.
Move to other devices as need by clicking on those devices within the topology.
Fault Identification
The trouble ticket will include three questions that you will need to answer:
1. Which device contains the fault
2. Which technology the fault condition is related to
3. What is the solution to the issue
To advance to the next question within the ticket click on "Next Question".
When you click "DONE", the trouble ticket will turn RED and will no longer be accessible.
You may also use the "Previous Question" button to review questions within that specific ticket.
To complete a trouble ticket, answer all three questions and click "DONE". This will store your response to the questions. Do not click on "DONE" unless you have answered all questions within the ticket.
Item Completion
Click the NEXT button on the bottom of the screen once a ticket is RED. This action moves you to the next item.
Scenario
The company has created the test bed network shown in the layer 2 and layer 3 topology exhibits.
This network consists of four routers, two layer 3 switches and two layer 2 switches.
In the IPv4 layer 3 topology, R1, R2, R3, and R4 are running OSPF with an OSPF process number 1.
DSW1, DSW2 and R4 are running EIGRP with an AS of 10. Redistribution is enabled where necessary.
R1 is running a BGP AS with a number of 65001. This AS has an eBGP connection to AS 65002 in the ISP's network. Because the company's address space is in the private range, R1 is also providing NAT translations between the inside (10.1.0.0/16 & 10.2.0.0/16) networks and the outside (209.65.200.0/24) network.
ASW1 and ASW2 are layer 2 switches.
NTP is enabled on all devices with 209.65.200.226 serving as the master clock source.
The client workstations receive their IP address and default gateway via R4's DHCP server. The default gateway address of 10.2.1.254 is the IP address of HSRP group 10 which is running on DSW1 and DSW2.
In the IPv6 layer 3 topology R1, R2, and R3 are running OSPFv3 with an OSPF process number 6. DSW1, DSW2 and R4 are running RIPng process name RIP_ZONE. The two IPv6 routing domains, OSPF 6 and RIPng are connected via GRE tunnel running over the underlying IPv4 OSPF domain. Redistribution is enabled where necessary.
Recently the implementation group has been using the test bed to do a 'proof-of-concept' on several implementations. This involved changing the configuration on one or more of the devices. You will be presented with a series of trouble tickets related to issues introduced during these configurations.

The implementation group has been using the test bed to do a 'proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing schemes, DHCP services, NTP services, and FHRP services, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolate the cause of this fault and answer the following questions.
The fault condition is related to which technology?

• A. NTP
• B. Switch Virtual Interface
• C. Access Vlans
• D. Switch-to-Switch Connectivity
• E. Port Security
• F. Loop Prevention
• G. VLAN ACL / Port ACL

Answer: D Explanation:
Steps need to follow as below:-1.When we check on client 1 & Client 2 desktop we are not receiving DHCP address from R4Ipconfig ----- Client will be getting 169.X.X.X2.On ASW1 port Fa1/0/ 1 & Fa1/0/2 access port VLAN 10 was assigned which is using IPaddress 10.2.1.0/24Sh run ------- & check for running config of int fa1/0/1 & fa1/0/2====================================================interface FastEthernet1/0/1switchport mode accessswitchport access vlan 10interface FastEthernet1/0/2switchport mode accessswitchport access vlan 10
3.We need to check on ASW 1 trunk port the trunk Po13 & Po23 were receiving VLAN 20 &200 but not VLAN
10 so that switch could not get DHCP IP address and was failing to reach IPaddress of Internet4.
Change required:
On ASW1 below change is required for switch-to-switch connectivity..int range portchannel13,portchannel23switchport trunk allowed vlan noneswitchport trunk allowed vlan 10,200
NEW QUESTION # 89
...... It is known to us that time is money, and all people hope that they can spend less time on the pass. We are happy to tell you that The Designing Cisco Enterprise Networks exam questions from our company will help you save time. With meticulous care design, our study materials will help all customers pass their exam in a shortest time. If you buy the 300-420 Study Materials from our company, you just need to spend less than 30 hours on preparing for your exam, and then you can start to take the exam. We believe that you will pass your exam and get the related certification with 300-420 study dump. 300-420 Guide Torrent: https://www.realexamfree.com/300-420-real-exam-dumps.html BONUS!!! Download part of RealExamFree 300-420 dumps for free: https://drive.google.com/open?id=1rL891ELkbf9YhpJwCvQ-MBmTCVVmKBB6