The Reasons Why Key Repair Is The Most Popular Topic In 2023 How to Do a Broken Car Key Repair

You're heading to work in hurry, and you jam your keys to your car in the ignition. You try to turn the key however it locks. the lock.

There are a few ways you can try to solve the issue before calling a locksmith. Here are a few easy fixes:1. Super Glue.

1. Contact an expert locksmith

One of the worst things that could happen to the owner of a car is a broken key in a lock. This can be even more frustrating if it occurs while the driver is hurrying to get to work or drop off a child. In this situation it is essential to act quickly and attempt to free the stuck key.

It is recommended to call an experienced locksmith for this task as they will have the appropriate tools to remove the broken key without cause damage to the lock. Many people look for something that is thin and rigid like paperclips or toothpicks. But, this is not the best choice since they are too thick to fit inside the lock.

The best solution is to look for a pair of tweezers, as these are quite thin and can easily get into the key hole inside the lock. car key fob repairs near me should be strong enough to grab the broken part of a key and then pull it out. If you don't have tweezers, it might be worth searching for a set that is available at auto parts stores. They are thin and flat with hooks that are small enough to be inserted into the key hole and grip on the broken piece of the key.

A magnetic key hook can be used to stick to the metal inside the lock, and then pull it out. This is not always the best option since it could be caught under the lock and cause further damage. In this case, it's best to call an experienced locksmith.

Some people attempt to glue together the two pieces of a broken car key using superglue order to get it out of the lock. This is a risk since the metal pieces may tangle and break later. It is crucial not to turn the key, as this could cause further damage to your lock or the ignition cylinder. Call a professional locksmith to repair the broken key immediately.

2. Drill a hole

Even with a spare key you may not be able access your vehicle if a key breaks inside the lock. In these situations drilling the lock is the best choice.

It is important to make sure the keyhole is set up for a basic tumbler key. If it's not then you won't have the ability to drill out the pins and cause damage to the lock's door or internal mechanism.

Next, it is important to know that you'll be drilling through the outer plastic layer and the inner metal layer. A small drill bit will suffice to penetrate these layers, but it is important to be sure to not go any deeper than this. If you drill too deeply, it could harm the wiring harness inside or cause the drill bit to get stuck in the hole.

Wearing a mask or protective equipment is recommended when working with drilling. This will stop dust and dirt from entering your lung.

It's also a good idea, when the broken piece of key is sticking out of the lock, to keep pliers and tweezers at hand. If there is enough of the key sticking out to be able to grasp with tweezers or pliers, this could be sufficient to get it out of the lock. If not, you'll have to use a tool such as this to encase it in the lock, and then turn it toward the key to grab and take it out.

3. Drill a nail

You could be left without a home when you cut your key in half. There are a few ways to fix it without paying for a locksmith. The first step is use the screw or nail. You can find them at home or at a hardware store. It is recommended to select a nail as thin and long as possible. This way you can fit it into the hole and then use epoxy to link the two pieces together. It is also important to ensure that the back of the nail is flat. This will help it to fit in the cut slot of the key. This will keep it from moving and possibly breaking again in future.

4. Super Glue

A lot of car owners tend to use DIY techniques like using super glue try and fix a broken car key, however this is not a safe option to make. You could end up damaging the lock, and then have to pay more money to get a new one.


You need to check the broken keys first to ensure they're the same size. This is crucial to ensure that all the pieces that have been glued are aligned correctly and that the key fits in the lock after they have been bonded. After that, use the fine-grit sandpaper or a metal file to smooth the edges on the damaged pieces of the key. This will strengthen the glue's bond and reduce the chance of a loose key.

After finishing the edges after polishing, apply only a small amount (about the size of a pea) of super glue to one end. Only apply tiny amounts of super glue, since too much can make the key too heavy. It will then be difficult to fit into the lock. After lining up the two pieces of the broken key, press them together. After several seconds, the glue will start to set and bond the key pieces together.

A bobby-pin or a paperclip can also be used as a tool to extract a broken key from the lock. They can be cut like a pick and then inserted into the lock. This technique is particularly useful in the event that the broken part is in or near the keyway or ignition hole.

Another important point to keep in mind is that if the broken car key has electronic components that require a new key cut from the dealer or a professional locksmith. This is because the key needs to be programmed with a brand new code and the chip must be replaced. If, however, only the shell or metal portion of the key fails it typically requires a new key cut and doesn't require reprogramming or replacing of the electronics.