The Most Popular Kia Picanto Key Fob Replacement Gurus Are Doing Three Things How to Replace a Kia Sportage Replacement Key

The key in many Kia models comes with an electronic keyless entry system built into. The key is usually akin to an remote control, and can be exchanged with a new one from a Kia dealer or locksmith.

Key fobs can stop working due to a variety of reasons, including the battery being dead, worn-out buttons, signal interference or water damage. Here are some tips to assist you in getting your Kia sportage replacement key working for good.

How to replace the remote key or smart key


If your Kia comes with an intelligent key, remote key push-to-start key, or a standard non-transponder key made of metal The battery inside these keys will eventually require replacement. This is especially when your car displays a message telling you that the smart or remote keys aren't powered.

This is a relatively simple process. To replace the battery on the keyfob take out your mechanical key from the slit at the back of the fob. Then, push the cover open. A small screw will be inside the key fob to hold the battery in the correct position. Using a small screwdriver, unscrew the screw and remove the old battery. Then, kia sportage key fob can insert the new battery and close the slit inside the key fob.

Once the key fob has a fresh battery Test it by pressing the locks and unlock buttons. If the doors unlock and lock according to your expectations, then you're set! You can now use the hands-free feature to lock and unlock your Kia when your fingers get cold or you need to complete errands in Brandon.

Note: Some key fobs (transponder chip or smart keys) might require their programming completed. This requires a programming machine, which is only available to the locksmith for cars or dealer. Other keys (non-transponder metal keys) do not require programming. If you're looking to reprogramme your key, you'll need note the key code's number on the key code tag.

How to replace a battery

If your Kia key fob isn't responding when you press the lock or unlock button on the fob, this is a clear indication that the battery should be replaced. A battery that is not functioning properly can cause other issues, such as the check engine light flashing or the engine not turning correctly. It is fairly easy to replace key fob batteries by using only a few simple tools.

Before beginning the process, make sure that your vehicle is turned off and that all doors are closed. Find the small, metal or plastic piece at the bottom of your key fob and move it until a metal key slides out. Then, you can insert the key in the handle on the door of your driver to open your car.

To replace the battery on the key fob remove the rear cover. Use a pry tool to remove the latch that holds the black negative cable. Remove the old battery and then orient the new one to ensure that the "+" positive side faces you, while the "-" negative side is facing the fob's metallic electrical contacts. Push the new CR2032 battery straight into position with care to avoid using too much force to avoid bending or damaging the contacts made of metal.

Once the new battery has been installed, turn the key fob off and on in the ignition repeatedly until the door locks cycle. Then you can test your Kia key fob and see whether it's working again.

How do I replace a smart keys

You may have either the standard keyfob or Smart Key, based on the model of Kia Sportage. The smart key features an embedded mechanical key blade, while the standard keyfob does not. Both key fobs have a battery that will eventually require replacing. It is a simple process that takes only two minutes.

Be sure to switch off your Kia and sit on a level and well-lit surface prior to you begin. Also, remember that there are tiny parts inside the fob which could be removed if not cautious.

The small release button is located on the lower backside. This will either be an oval silver button or a rectangular slot. You can open the key fob by pressing the button.

Once you have the key fob open, you can simply take out the old battery and replace it. The new battery is one called CR-2032 and can be purchased through the internet or at a local auto parts shop. Once you're done with the battery, you should be able to lock, unlock and start your car using your key fob even if the engine isn't running!

How do you replace the mechanical key

The Kia keyfob can be a fantastic convenience, allowing us to lock or unlock our car with just pressing a button. Like any other device it is possible that the Kia key fob can have issues at times. Luckily, there are ways to troubleshoot these issues and keep our key fobs in good working condition for the long term.

One of the most common problems is a weak or dead battery. This can cause your device to stop working or operate intermittently. If this is the case you should replace the battery an entirely new battery.

If this doesn't solve the issue, you can use a standard flathead screwdriver to wedge the fob's casing made of plastic open. Be sure not to damage any internal components, or scratch the plastic. Once the battery is opened, carefully remove the old battery and replace it with a brand new one.

Close and open the door using the mechanical key. (Every kia fob comes with an emergency mechanical key that fits into the slot). Test the key fob and make sure it is working correctly. Contact a dealer, or a locksmith to solve the issue in the event that the fob is not working. To avoid future lockouts, ensure you have an emergency key that will work in all of the door and trunk cylinders.