Ten Common Misconceptions About Subaru Xv Replacement Key That Aren't Always True How to Change a Subaru Spare Key

Contact a locksmith if lose your Subaru key. Locksmiths usually can cut keys for you at a lower cost than the dealer.

Subaru car keys are usually either intelligent "push-to-start" fob remote keys or basic keys made of metal. The Fob key has to be changed.

Keyless Entry System

The key fob can be used to lock and unlock your Subaru remotely. It can also open the trunk of your vehicle or the lift gate. These remotes use the keypad inside your car to communicate with the computer in your vehicle.

Subaru models include a less well-known feature called PIN Code Access. You can utilize a personalized number sequence to open and start your car. If you have a model newer than Subaru Forester, Outback, Crosstrek, WRX, WRX STI, or Impreza which came with this feature, refer to the owner's manual for instructions on how to make use of it.

It's possible that the battery inside the key fob has gone out. The first thing you'll want to ensure is that the key fob has new batteries You can do this with a portable remote tester or a basic multimeter in your garage at home.

The next step is to take the key fob out of its case and examine the circuit board that controls the transmitter. The board will contain one or two sets of 8-digit numbers, so jot down the first set so you can remember it later. Once you've finished take the key fob back together and you'll be ready to program it at home. The procedure to do this is different based on the model and year of your vehicle however it's generally easy enough to complete on your own.

Key Fobs

Subaru's most recent models include key fobs which not only unlock doors but also activate lights, lock the gas cap, and even start the car. This is especially useful if you have ever encountered yourself at a gas station and your car won't even start because the battery in the key fob has failed.

Whether your Subaru is new or old it's likely that your key fob can be replaced without difficulty. Remember that some of the most modern models, with their advanced technology, may require an appointment with a dealer. With just a bit of effort and time, you can design your own replacement key fob.

Start by opening the case and examining the circuit board of the transmitter. (Instructions on opening the case are usually given in the owner's manual). There should be two or more serial numbers with 8 digits each. Write down the number that is the first in the series and keep it in a safe place to refer to in the future.

Then, get into the driver's seat, and close all of the doors. Turn the key 10 times to start your car, and then switch it off. Press the lock button of your key fob, and then open the door. This will verify whether your doors are operating correctly. Close the door, then remove the key. The chime should be heard from your vehicle and indicate that the key fob has been programmed.

Ignition System


If your Subaru keys aren't functioning as they ought to it could be because the key battery is dead. You can replace the battery in your key fob by yourself if know how. The battery replacement is cheap and easy to locate. If the key fob you have doesn't respond to your commands, it may be a problem with it. It's recommended that you visit a dealer for an extra key. They will guarantee that the key is genuine Subaru key that's covered by warranty. They'll also program it to your vehicle. This is far safer and easier than buying an aftermarket key from an organization on the internet.

The dealer is also able to cut a key for you if you give them your VIN number and as proof of ownership. The information provided will be used to identify the new key so that it can be recognized by your immobilizer. This process is more involved than cutting a key, and dealers will typically charge a higher price for this service.

Once the new key has been programmed, you can switch it with your working key. It takes just five seconds to insert the new key, so be sure to keep your working key close to your side. You can take the key off when the security light has stopped flashing and you can test it.

Battery Replacement

One of the main advantages that make Subaru fobs so beneficial is their ability to switch on your car's power windows and sunroof with a single touch of the button. The battery inside your Subaru fob isn't built to last forever, and will need to be replaced at some point. This short guide from Capitol Subaru will help you to replace the battery yourself.

You'll need to locate the tiny crevice that separates the front from the back of your keyfob. With locked keys in subaru forester , you'll be able to pop the seam to reveal a small area inside that houses the battery. Install the new battery and ensure it is facing the right way. Remove the old one. Once everything is reassembled and you are able to use your new key fob to lock or unlock your vehicle easily!

It's always recommended to have an extra set of keys available especially if you've lost yours or it's not working properly. A new key can be found at your local dealership for cars or you can request one cut by locksmiths. It is crucial that your key fob works efficiently as soon as you can so you can drive safely.