How Upvc Door Lock Replacement Changed My Life For The Better Upvc Door Lock Replacement

Change the lock on your uPVC door is an easy DIY job. It's cheaper than contacting a locksmith to do it for you, and will protect your door from serious damage should you attempt to open the cylinder with having a key.

Most domestic doors, including French and patio doors, are fitted with Upvc locks. Everest is the most common manufacturer of lock cylinders.

Fixing the Cylinder

The cylinder is the part of the lock that accepts and turns the keys. It has tumblers inside that align when the correct key is placed. The cylinder's replacement is an easy way to improve the security of your uPVC doors.

However, it is a job best left to an expert. Attempting to change the lock on your own could damage your door and cause you more issues in the long run.


A locksmith can assist by taking the old cylinder out and replacing it with a new one. They can also provide suggestions on which cylinder is best for your door. They will also ensure that the lock is correctly fitted and secure.

There are a variety of reasons why you may want to change your cylinder, such as following a break-in or moving home. You may want to improve the security of your home or comply with insurance requirements. A professional locksmith will be able to offer you a range of uPVC lock options that suit your needs.

In order to replace your cylinder, require a screwdriver and an assortment of screw extractors. You can purchase these tools in most hardware stores and on the internet. Start by slackening the screws that secure the door handle and the face plate. Next, you'll need to open the door so that you can reach the side of the faceplate of the lock and the frame's edging. The screws can be removed and stored in a safe place.

After you have removed the faceplate, you can take off the cylinder. Insert the key into the hole and turn it to the right or left about 10 degrees. This will loosen the cylinder and allow you to take it out of the hole. You'll need to test the key to be sure it's working correctly.

If your key won't turn, you may require lubricating the key using grease or oil. The majority of hardware stores offer lubricant and many locksmiths also carry it. This will help you unlock your door without a lot of fuss.

Fixing the Mechanism for Sticking

The door lock mechanism made of upvc could become stuck or a difficult to close and lock. double glazing window lock repair may aid in fixing the issue without having to replace the entire mechanism. Start by looking at the mechanism and determining what is causing it not to work. It could be as simple as hinges inside being unlubricated or more serious, like a damaged gearbox.

You can also try to lubricate the locks in your home using common household items like WD40. This will help keep the locks in good condition and can extend their lifespan. Use a soft-bristled toothbrush to remove any dirt and debris that may have accumulated inside the lock. Maintaining your Upvc locks oily and tightened will help them last longer and decrease the amount of force needed to open and close them.

When you have a lock problem, it's advisable to contact an expert rather than trying to fix the issue yourself. It's not worth the risk of damaging your uPVC or causing future issues with the locking mechanism. It's also preferential to pay some extra and feel secure knowing that the job is performed professionally by a professional with years of experience.

If you're planning to try to change the lock of a uPVC lock by yourself you should follow a manual or watch a tutorial video to ensure that you know what you're doing. You're more likely to cause harm if you don't. You may even damage the cylinder or the door handle.

Repairing the door handle that is floppy

Many people choose to change their uPVC door handles for a number of reasons, including seeking to improve security or meet insurance requirements. It is important to ensure that the replacement handles you select are of top quality to avoid problems such as the handle becoming loose.

If the uPVC handle is loose, it's likely that the mechanism has to be tightened. It's usually a simple process that you can do yourself. However, if aren't confident in DIY projects, you should employ a professional locksmith.

The first step is to take off the handle, then locate the screw that holds it in the first place. Once you've located it, tighten it with a screwdriver. It might require a few times to get the screw to line up correctly, but you must be careful not to over-tighten it, or cross-thread it. After the screw is secured, you can put it back on the handle to ensure that it is working properly.

You can also replace the whole handle plate instead of only the screw. Depending on the type of lock you may need to make use of different screws. Once you have replaced the handle, ensure that it is aligned with the keyhole and it isn't slipping or moving when you turn it.

You could also grease the mechanism to make sure that it's not in a faulty position. If the problem persists then it's best to seek out a professional double-glazing repair service.

If you're replacing your old or broken locks on your own or in the event of necessity the process can be a stressful time. It is worth hiring a locksmith to complete the task to avoid any other issues and make sure that the work is done in a professional manner. They will be able to guide you on the best locks that suit your home. They can assist you in locating a Sold Secure SS301-approved set, or 2* Kitemark.

Repairing a damaged Gearbox

If you're experiencing issues with your uPVC doors, it may be time to change the lock. Fortunately, the problem is usually not as severe as one would think and can be fixed by a locksmith. It is important to know that replacing the entire mechanism could be costly, and it is not something you'd want to do at home.

To begin, it is important to determine what kind of door you have so you can buy the correct parts for a upvc door lock replacement. In order to get a replacement lock you'll need to take a measurement of your lock to determine the manufacturer. It will make the process much easier if you can reference the lock originally fitted to your door.

It is also important to ensure that you have the right tools to replace a upvc lock. These include screwdrivers as well as a drill. The right tools will help you avoid damaging your door when trying to repair it. Once you have the correct tools, be sure to follow the instructions from the manufacturer to install your new lock correctly.

Once you have the replacement, you'll have to test it and then make any necessary adjustments. This will ensure that the replacement is functioning properly and functions as intended. If you're unsure how to proceed it is recommended to seek out an expert.

You may be noticing that your upvc door handle is a bit loose or floppy. If this is the case, the issue is likely in the 'barrel' section of your lock. This is where the indent for the key is located. If this section of your lock is loosened, it will affect how well your door handle operates. To tighten the handle, find the screw that holds the barrel of your lock in place and tighten it with an screwdriver. This will tighten the handle and fix the problem of a floppy handle.

The modular design of uPVC doors makes it easy for the majority of people to do it themselves, and for much less money than hiring locksmiths.