10 Startups Set To Change The Replace Door Lock Industry For The Better How to Replace Door Locks

Replacing your door lock can be a challenging task. It is crucial to keep your home secure from intruders, and to change locks if you get a new housemate or let out your home.

The majority of new locks are designed to fit standard door widths. If your door is more thick, you'll need a "thick-door" kit with longer screws and longer tail pieces for deadbolts.

The old lock can be removed

If you're replacing your door lock, you need to take the old lock off the door. You can do this with a few simple tools, but you must be careful not to harm the door or frame. Making use of the right tools can save you from costly repairs in the future.

Take off the screws that are the trim and handle. You can use a screwdriver do this. Once the screws have been removed, you can take off the trim. Then, you will be able to get to the screw that holds the handle and trim to the door. After removing screw then, you can take off the lock cylinder as well as open the handle.

One of the most frequent indications that your lock is failing is when you can no longer turn the key inside. This is due to the tumblers wearing out and then stopping the movement upwards or downwards, causing the lock to stop working. If this happens, you'll need to bring the lock to a locksmith to be reset-keyed.

Start by removing the screws holding the faceplate to its place. If your kit doesn't include new screws, you should purchase them at a hardware store. If you're installing a mortise locking it is also necessary to remove the screws holding the external roseplate to the door. After taking off the screws, you can remove the plate and the dead bolt.

Then, search for a pinhole on the handle's interior trim. If you find a hole, insert a straightened safety-pin into it. You can also use a flat screwdriver to press against the depression. This will release the lock handle and expose screws which can be removed to remove the entire lock from the door.

Installing the new lock

Whether you need to change your lock after a break-in or simply want to update the appearance of your door, installing a new lock is relatively simple. However, it is essential to measure the door to ensure that you purchase an appropriate lock that is the right size for your door. This is especially important for deadbolt locks, as they require a specific size to fit into the strike pocket and bolt plate. Contact your local hardware store for advice if you aren't sure what size to use.


If you're replacing mortice locks, you can make use of the existing centre rail as a reference for the positioning of the new mortise lock. Once you've determined the location of the lock, make holes along the central line of the same size as the lock. Then, chisel the wood until you have an area that is rectangular enough to fit the mortice lock. Then, insert the lock and outline the faceplate using the marking knife. Mark and drill screw holes to secure the faceplate in the correct position.

You can save money when making rekeys on locks by buying an entry-level set that comes with a re-keyable key and an unlocked key. The kits are available at numerous online retailers and also from hardware and home improvement stores. upvc window lock mechanism replacement www.repairmywindowsanddoors.co.uk include instructions to help you complete your task.

Make sure to read your lease agreement if you are renting before changing locks. You may have to give the landlord the key to the new locks. If this is the case, you could be required to take out the old lock and replace it with a standard lock. You can purchase a standard lock at your local hardware store or you can buy an advanced lock that connects with your home's WiFI and lets you to lock and unlock the door remotely. Schlage Smart Lock is compatible with all knobs and levers. This lock can be connected to a security hub for your home so that you can receive notifications whenever your door is unlocked or opened.

Installing the new lock

A broken lock can be an issue for security, so it is essential to replace it as fast as you can. It's a good thing that replacing a door lock is a simple and quick task that anyone can complete. The first step is to disengage the old lock from the door. This is done by unscrewing the screws that hold it in place and then removing it. You may require a screwdriver or an Allen wrench depending on the kind of lock you have. Save all the parts of the lock that were used and keep them in a secure location.

Next, install the new lock onto the door. Most kits include an image of the cardboard template that shows how the lock should be placed on the door. If the template does not match your door, use a pencil to trace around it or use a Chisel to remove extra material. Be sure that the inside latch plate is aligned with the mortise opening once the new lock is installed.

When installing the new lock, be cautious not to over tighten it. This can cause the lock to rattle, or even break. If you have a lock keyed, check that the spindle is aligned with the hole on the knob. If it's not, make use of the screwdriver to drive the lock into the knob.

Install the baseplate with the design that is included with the lock once you've installed it. If the lock isn't equipped with a base plate with a design you can purchase one that is compatible with the hardware.

The final step is to test the new lock to make sure it functions. You can do this by inserting the key into the lock and turning it to make sure that it is able to open. If this doesn't work you need to seek out a locksmith.

You can also prevent break-ins by having an expert reset your locks. This involves changing the internal tumblers of your lock to make it unreceptive to the keys you have previously used. This will allow you to feel safe and secure at home.

Testing the new lock

When you are installing a new lock you want to make sure that it functions as you intended. This is why it's essential to follow the guidelines carefully. You may not be able to open your door if don't. You can contact a locksmith for assistance when you're not sure what to do. A locksmith can also give suggestions on the most suitable locks for your home.

If you are having trouble opening your lock it could be an issue with the latch or handle. Try lubricating the latch with graphite or spraying it with WD-40. This may solve the issue. However, you might need to replace the latch completely if it's not working correctly.

Another possibility is that the lock has been installed incorrectly. The door handle clip can be broken or missing on the new lock. In this instance you must remove the handle from the inside and insert a retainer clip. Then, you can connect the handle to the lock and test its operation.

It is important to test the keypad after replacing your lock to ensure that it is working correctly. You can test it by inserting the key inside and turning it. If the keypad is functioning correctly, your door will be able to open and lock.

Check the deadbolt to make sure it is working properly. If it's not working, remove the latch from the door and undo the Phillips-head screws. Remove the old deadbolt and replace it with the new one. Place the deadbolt in the proper direction and load the lock properly.

Another way to test the new lock is to perform the spindle test. This can be done by putting a screwdriver into the spindle. This test should always be performed before reinstalling the lock in order to avoid any mistakes.