10 Best Facebook Pages Of All Time About Peugeot 208 Key Replacement Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot key fob suddenly stopped working, it could be because of a dead battery in the coin-cell unit, water damage, receiver module issues, or a defective chip. These are all easy solutions and you'll be able to restore your car to speed in a matter of minutes!

Car keys can also be damaged due to the fact that the blade on the key gets worn. You can easily fix this issue by visiting your local Car Key Man Auto Locksmith to install a new blade.

Battery

The key fob battery in your Peugeot 308 can sometimes die or become too weak to send an intense signal to your car. The key fob may be inoperable and prevent you from locking or unlocking your doors, or even starting your engine. To fix this, you'll need to replace the battery in your key fob.

You'll need the replacement battery from an auto parts store or at your local hardware store. Make sure the battery is brand new and has not stored on the shelf for too long. A brand new battery is more capacity and can transmit a stronger signal to your car.

After replacing the battery, try unlocking and locking the doors of your Peugeot with the key fob. If the doors aren't unlocking the issue is likely in the car's receiver module which can be changed by your local Peugeot dealer.

The chip inside the key fob could also be damaged. This could happen if you drop your key fob on the ground or expose it to water. The rubber seals that protect the chip from moisture might wear down over time, particularly if the key fob is exposed to water for extended periods of time like submerging it in the ocean at the beach. To prevent this from happening, you should keep your key fob free of the reach of moisture and away from water.

Water Damage

If your key fob becomes soaked in water, regardless of whether you dropped it in the pool or threw it into a puddle, don't assume it's a loss. Although the key fob is equipped with rubber seals that protect it from water, long-term exposure to water could lead to damage to its electronic chip. Since water is an excellent conductor so any water that gets inside the key fob will result in a series of short circuits which will eventually ruin the chip. After removing the batteries, clean its contacts with isopropyl, and then dry them completely before putting them back into.


A dead battery could be the reason your Peugeot 308 won't start. If you have an extra vehicle, jumper cables can be used to get the engine going again. If you suspect that the battery is at fault, it will need to be replaced.

Another possible cause is a malfunctioning receiver in the vehicle, which could block the signal from the key fob. The key fob might be damaged or there could be an issue with the antenna, wiring or the key fob itself. It could be necessary to program a new keyfob for your vehicle if you are using one. If you are unable solve the issue, contact a professional technician. peugeot car key who is trained in the field will be able to diagnose the problem quickly, and fix the issue immediately.

Radio Interference

Signs like key fobs that are not recognized or having a restricted range typically indicate that there is interference in the system. The interference can be radiated or transmitted, which is caused by speaker and power cables passing too close to electrical parts. Generally, rerouting the cables or moving them away from these components can solve the issue.

It's unlikely that anyone is listening in on your key fob signals to take your car away, but it's possible that the signal has been masked by radio frequency interference. Fortunately, this issue is simple to fix.

If your key fob is not being recognized by the system, try a new battery. Also, ensure that the battery is the right size and type. Incorrectly sized batteries can damage the fob.

Some alarm systems that are sold on the market and radar detectors operate on the same radio frequency as your key fob, and they can cause them to interfere with your key signals. Do not connect these devices to your key fob.

Pairing Issues

A car's remote keyless entry system includes a receiver that receives radio frequency signals from the key fob. If this receiver develops a problem, you won't be in a position to start your car regardless of whether the key fob is functional and is reset. The issue can be caused by a variety of ways, including by an inoperative battery on the coin-cell or water damage. The receiver could also be malfunctioning because of a software bug or internal damage in the key.

One of the most frequent reasons why your Peugeot 308 key fob isn't working is that the battery inside has failed. You can easily replace this with a brand new battery however, it is essential to get the right battery for your key fob. If you use a battery that is not correct, it could lead to further problems with the key fob, so it's best to use the original or the replacement that is identical in size, voltage and specifications.

Another reason that your Peugeot 308 key fob might not work is because it is paired with an unrelated vehicle. This could happen if you have given your key fob to a person you know or if the key has been used to unlock and start other vehicles. This issue can be solved by reprogramming the key fob using an OBDII scan. This tool typically asks you for specific details about your vehicle, like the VIN or engine type, so it's essential to enter it correctly.