10 Things We Do Not Like About Sliding Patio Doors Repair Sliding Patio Doors Repair

It is possible for sliding patio doors to be difficult to open and close. This can be due to a range of issues, such as dirty tracks or improperly aligned rollers.

Start by cleaning and lubricating your rollers. patio door lock repairs near me can also re-align the rollers using the adjustment holes located on the bottom side of the door panel that can be moved.

Dirty or Damaged Track

A sliding door that doesn't slide as it should can result from a dirty or damaged track. Over time, dirt, grit and even rust can accumulate, preventing the track from moving smoothly. The solution is to thoroughly clean with the use of a brush and mild detergent. This task should be performed regularly to ensure smooth operation and avoid costly repairs in the future.

A door that is leaking can be a common issue. It needs immediate attention to avoid structural damage, water damage and mold growth. The problem is usually caused by worn weather strips and misaligned door. This can be corrected by replacing the weather stripping and aligning the doors.

Rollers that bounce off the track are another common issue that can be fixed with some simple DIY work. This can be a difficult task so you should ask a trusted friend to assist you. Stand inside the house, and lean a panel toward you to move the rollers. To stop the panel from falling, place it on sawhorses when it's been removed from the bottom track. Then, loosen the roller's screws and then pry them out with a screwdriver. You can now clean any dirt that has accumulated between the wheel and the tracks. Then, clean each wheel with denatured alcohol and an rag, and then reposition the wheels and reconnect them to their tracks.

It is possible to straighten bent sections of track with a rubber mallet, and a block of wood. However when the bent section is located near the hinges and has the potential to cause more damage, you'll be better off calling an expert for safety reasons.

Misaligned Rollers

If your sliding door is sliding poorly it's most likely due to the roller wheels are misaligned with the track. The wheels may be dirty, rusted, or their bearings are worn out. This creates friction between the bottom of the door and the track, which causes it to snag or grind when it's opened or closed. It also makes squeaking noises.

Fortunately it's a simple fix. It is not necessary to take off the door to get at the wheels since they are on a bracket that is adjustable. Find the holes for adjustment (usually on the opposite side of the frame) and use a screwdriver to rotate the screws that control the wheels. Turning the screw clockwise will raise the wheel while turning it counterclockwise lowers it. Continue to adjust the door until it is open and shuts effortlessly.

It is important to adjust the wheel prior adjusting your latch. To ensure that the lock functions properly the latch hooks need to be aligned with the strike plate. If you don't do this the latch could open or close accidentally while you are out of the room.

Sliding patio doors are a major investment, and keeping them functioning correctly helps keep your family safe and secure. By fixing common issues such as faulty tracks, rollers and handles, you can prevent expensive repairs in the future. Contact us to learn more about patio doors. We can assess your needs for repair of your sliding patio door and help you keep it in good shape. Our professionals can also assist with any replacement parts you may need.

The door frame is sagging or damaged

Doors for sliding patios are a great option for any home. They provide a convenient and attractive alternative to swing-open hinged or hinged doors for patios. Like any other hardware item sliding patio doors are prone to develop problems with time. Fortunately, many of these issues are easy to fix using a bit of DIY know-how.

A gap in the frame is a frequent issue with sliding patio doors. It can be caused by various reasons, including misaligned track or rollers, a damaged door or track or bent door frame. In most instances, the issue can be fixed by removing the doors and reattaching the track. It is crucial to be very careful not to harm either the frame or the track.

In certain situations it is necessary to replace the entire track, which can be easily accomplished using an universal replacement kit that is available at all major hardware stores. These kits are easy to install and will have your door back to normal in a matter of minutes.

It is crucial to inspect your sliding door frame and hardware for signs of wear and tear, such as loose bolts or screws. They can usually be tightened using a screwdriver or wrench which makes this a simple and efficient DIY patio door maintenance step. Additionally, it is important to lubricate your tracks and rollers to ensure smooth operation and prevent premature wear.

For many homeowners who live in the city, their patio doors are the main entrance to their backyard and outdoor living space. To ensure comfort and security in the home, it is crucial that they work properly. By following these simple DIY maintenance techniques, homeowners can prolong the life of their sliding patio door and cut down on costly repairs or replacements.

Handle is not working properly

Sliding patio doors are a great way to access your backyard and also enter your home, however they can be difficult to operate if damaged or misaligned. A damaged handle could cause the door not to open or close correctly. Fixing a loose handle can be done at home.


In many cases, a handle that is loose is the result of screws that have worked their way out of the backplate. To remedy the issue, tighten the screws on the inside handle with the help of a screwdriver. If the handle is loose it could be an indication that the threads have worn out and need to be replaced.

Or, a damaged latch might be the culprit. It is more likely the latch will break if it is made of metal instead of plastic. If the latch is not catching or turning it, try oiling it first to see if this helps. If not, you may need to replace the lock completely.

If the handle is damaged or broken, it could be difficult to use. If this is the case it is essential to replace it with a new handle that matches the style of your sliding patio door.

Feldco can help you restore your patio doors to their former splendor, whether they're brand new or outdated. We offer a broad selection of high-quality patio doors in different sizes and styles. To find out more about our doors, contact us now! We provide homeowners with our services in Southern California, including Ventura County, Orange County & San Diego County.

Afflicted Weatherstripping

It's time to upgrade your weather stripping if you see light in the doors and windows, or notice a draft pushing at the door or window. The strips form an airtight seal, which stops unwanted water, air and pests from entering the home. This helps keep your heated and conditioned air in, thereby saving money on energy bills.

It could have lost its positive seal, bouncy, due to age. You can easily diagnose this by running a dollar bill under the seal on the top and bottom of the jamb as well as door frame where they overlap. If the dollar bill slides between the seal and the door easily, it is time to replace the weatherstripping.

If you replace only the worn-out part of the weather stripping, this could cause problems in the future with the seal. It's far more effective to replace the entire stripping, so that you can rest assured knowing your door is properly sealed once more.

For an easy DIY project, follow our guide to weather stripping to remove old weather stripping and then apply the correct material on your sliding patio door and frame to create a durable and secure seal. This is a great opportunity for you to save money on your energy bills and repair your sliding patio door. Don't wait until its too late. Your wallet and home will thank you.