"Ask Me Anything:10 Answers To Your Questions About Repair A Window How to Repair a Window

Whether from kids playing baseball or the wind blowing through the night, windows are broken due to a variety. You can often get your window working again by following a couple of simple steps.

The simplest solution is to apply tape to cover any cracks. You can also purchase glass repair films that are similar to tape, but more durable.

Broken or cracked Panes

A cracked or broken glass window can result in more than simply a sloppy appearance. It could also allow rain, wind and insects to get into your home. Double-paned windows are especially vulnerable to damage because they can degrade the insulation created by the glass, and make your furnace or air conditioner have to work harder to maintain the temperature of your home.

Cracks can develop in your windows due to a range of factors including weather conditions and impact. A fall from an object hitting the glass or even just pressure changes in your home could cause the outer layer of the window to break while the inside pane is left intact. This type of crack, also known as a pressure fracture, can be recognized by its curving form that looks like an hourglass.

Stress cracks may also form between the outside and inside layers of a double-pane window. These kinds of cracks can be caused by extreme temperature fluctuations particularly in winter months, or when the glass is under excessive pressure.

If you have a window pane that is cracked or broken, there are some short-term solutions to keep water, wind and insects out while you plan a more permanent solution. You can cut a piece to the size of a plastic shower curtain to cover the crack. This isn't very attractive, but will keep your home warm until you are able to afford an even more permanent fix.

To make a long-lasting choice you can opt for glass adhesive, which is usually used for vehicle windows but will also work at home. You can purchase this adhesive online or at the majority of auto repair stores. Follow the instructions to apply it to your window. This type of fix is more labor intensive, but it can last for many years and can keep the crack from getting worse. You might want to consult with a professional depending on the severity of the crack in your window.

Water Infiltration

If a window is damaged, it could ruin the appearance of your home, and also cause water stains, mold and other damage. If you notice water spots or stains on the wall near windows, it's likely that you should call a professional to inspect and fix the issue. In some cases it may be required that the window be replaced.

Leaks around windows are often caused by improper installation or the use of inferior materials, such as housewrap or building paper instead of properly designed flashing. It is also possible that the sill at the bottom of the frame is not pitched downward to drain water away from the house.

If you do spot leaks, it is essential to examine both the interior and exterior of your home. Look for areas of rot in the wood surrounding the window as well as damp walls and sills, and paint that is peeling or bubbling. If you find any of these problems it's likely that the leak has been emanating from outside your window for some time.

A well-executed caulking job will aid in repairing minor leaks that occur around windows. You can apply a new layer of caulking by yourself, but you will need to thoroughly clean the area to ensure that the caulking is properly sealed. In some cases it might not suffice to stop a leak especially if it's a long-term issue.

Contact a reliable Dearborn company for window repair if find that your window is leaky. They will be able to complete a full evaluation and let you know whether the leak is due to the window itself or whether it's an issue with the siding, roof or gutters or the wall itself. They can also help you determine if it is worth attempting to repair the window or whether it's better to replace it. Once the experts have completed the repairs and evaluated the damage, they can provide advice on how to keep your windows in good condition.

Fogged Up Windows

Foggy windows aren't just ugly, they can be a serious energy efficiency problem. The cause of fog is water vapor condensing on a cold surface, like glass. This happens naturally when cold air collides with warm, moist indoor air, especially in a house where humidity is high. If windows become cloudy, they lose their hermetically sealed gas insulation (often Argon or Krypton) and are less efficient. Foggy windows can also lead to streaks and calcium deposits on the glass.

Install a dehumidifier near the window. This will help to remove some of that moisture from the air. This does not solve the underlying problem of a damaged window seal and won't prevent further fogging.


Another option is to make holes in the window and use a drain snake encased in pantyhoses to clear the trapped condensation. It is an expensive cosmetic fix that is effective. It won't replace the inert gas between the panes, and it will leave behind deposits and stains on the window.

There are several reasons why double-pane windows can begin to get a little cloudy. Damage to the seal caused by sanding around the frames or pressure washing could cause the crack, and it is possible that the gas/air hermetically sealed has degraded over time, particularly in older homes.

Many manufacturers offer a guarantee to fix or replace damaged windows. However the window that you have been in use for more than ten years and has become hazy, it may be too late to make claims.

The best way to fix windows that are foggy is to replace them with a brand new, high-quality window that will not have any problems with an ineffective seal. This will give clean windows with clear glass, greater energy efficiency, as well as other benefits such as a warmer home and lower utility bills. Employing a window installer who is experienced will ensure that you get the best window. The right contractor will ensure the proper measurements and will install for a long-lasting and reliable window.

Drafty Windows

Windows that are drafty can cause serious problems, such as increased heating costs in winter and increased cooling costs in the summer. They can also cause discomfort and health issues within your home. The cracks or gaps that surround the window frame as well as panes can create drafts. These gaps let cold air in and warm air to exit your home, which increases the need to run your air conditioner or furnace to keep the temperature comfortable.

Problems with the weather stripping or seals around the frame can also create drafts. This is most common with older windows that have wooden casings. As time passes, wood will expand and shrink and cause seals to fail. This can often be repaired by re-caulking the seals or re-caulking them.

A common cause of drafty windows in double or triple-paned windows is a broken seal between the layers. This allows argon to escape. This can be a costly issue to fix and may require the services of an experienced window replacement company in Glenview or other areas in the area.

The flame of a candle can be used to identify the cold or drafty windows. Move the flame around the perimeter of the window frame and note any places where the flame flickers or bends. This will help you determine the source of the draft.

Certain drafts in windows could be addressed by re-caulking the window or adding weather stripping. If your window seals are damaged or the panes are cracked, you'll require replacement. It is essential to consult an expert window replacement service to make sure that your new windows are energy efficient and have been installed properly. You can only save money on your energy bill if consult with an expert window replacement company. Contact Arch Design to learn more about our window replacement and installation services. We're happy to give you an estimate for you at no cost! We're looking forward hearing from you!