10 Wrong Answers To Common Repairs To Upvc Windows Questions: Do You Know The Right Ones? Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They do not rot or rust like aluminum or timber.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to ensure that you're doing all you can to ensure that your windows are in good repair.

For single pane windows it can be relatively simple to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. However when you have double pane windows that are held in place by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this instance you'll need to locate some plastic spacers that assist the new pane to fit properly into the frame of the window.

Wearing eye protection and thick gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor, where they could be trampled under.

It's a great idea to seal the gap after the glass has been removed. This will keep water and drafts from entering your home until a professional comes out to fix the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the gap between the window and the door is significant, you may need to consider a security screen that also includes windows. This will give you the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. As time passes, they may develop a variety of issues that include sagging. A sagging window in uPVC can cause issues with light, draughts, and even security. It's crucial to act immediately if you discover that your uPVC windows are sliding.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to open the windows to access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they stay in position.

If you are unable to move the hinges, you could have to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to lose tightness. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. This is usually due to screws that have loosened over time, but it could also be caused by the handle mechanism getting worn out. It's relatively simple to fix a loose uPVC handle. You'll first need to close the window and do an initial fitting. The corner joints of the sash need to be aligned with the casing joint. If it does not you can use a screwdriver to loosen the handle. Then, you can turn the mechanism to position.


3. Water Leaks

It is important to take action if awake each day to discover mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the issue the caulking that was used up may need to be removed before a new layer of caulk can be put on. It is crucial to remember that when it comes to uPVC window repair s you should not be tempted to 'over-caulk and then make the area harder to clean and reduce your energy efficiency.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is more with the seal rather than the frame. This can be easily repaired by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open in a breeze It could be hinges at the fault. They can be easily repaired by any skilled DIYer and can be completed in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that have hinges and like any mechanical part they can wear down over time. Changing a window hinge is essentially a very simple process, but it's easier to do when you have a person to assist in holding the frame in place.

Check that the uPVC hinges are closed and open in the right direction. You can check this by looking for the arrows on each hinge, this indicates which way the window should be opened.

The problem can be caused by opening the window incorrectly or by a poor installation in the factory. This can often be resolved by sending us a picture on our website. We will be pleased to offer you suggestions.

It is also essential to lubricate the hinges on a regular basis. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It can also stop corrosion and decrease the chance of sticking. This must be done at a minimum once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. The hinges may also become unbalanced due to wear, causing a gap where the sash meets frame. If they are beyond repair, it may be necessary to get them re-aligned. Second, the interlock can be disaligned. This happens on the hinge's side and could require to be cleaned. In certain instances it might be necessary to replace the hinges.

The next most common cause of draughts is the window seals, these can become worn down or damaged over time, and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help regulate indoor temperatures and lessen the possibility of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They can help stop cold air from entering and keep your home warm and cosy!

With a bit of regular maintenance and repairs, your upvc windows will continue to provide a great level of insulation and security for your home. However, it is important to recognise that all windows have a life span and eventually, they will reach the point when it's more economical to replace them than repair them. If you encounter any issues with your upvc window, it's best to consult an expert as soon as you can.