7 Simple Strategies To Completely Rocking Your Nissan Qashqai Key Fob Reasons Why Your Nissan Qashqai Key Fob Won't Work

The Qashqai has a distinctly SUV feel to it thanks to its larger dimensions. Moreover, the 19-inch wheels on Ti and ST-L models can be a bit spongy at times. i lost my car keys nissan of the Qashqai may also lose grip on bumpy surfaces, and its CVT can sometimes show wrist-flexing torque steering.

This is typically caused by a dead coin battery which can be easily replaced in a matter of minutes. Make sure that the replacement battery is of the same voltage, size, and specification.

Water Damage

One of the main reasons that a Nissan key fob gives the "key ID is incorrect" message is due to water damage. The rubber seals on the key fob guard the chip's electronics, but long-term exposure to moisture can cause it not to work effectively. This is typically the case when you drop your key fob in the ocean or a swimming water pool, but it could happen when it's wet from soapy hands or rain.


If your key fob has been exposed to water for a prolonged duration, it might have to be cleaned using isopropyl ethanol or electronic cleaner. It may also require a visit to a specialist to repair or replace it.

If your key fob does need to be replaced the process is simple. First, ensure you have a multipack of the right battery (CR2032 3V). Then, you can open the front and back cases with an abrasive screwdriver. Remove the metal clips, then remove the old battery and replace it. Reassemble the fob and replace the mechanical key. Check to see if it functions correctly. If it does not, you'll need to take it to a Nissan dealer or professional auto locksmith for replacement of the chip. The chip is not usually damaged by water, so it should not be too expensive.

Dead Coin Battery

Another reason that the reason your Nissan Qashqai key fob might not function is that the battery in the coin has gone dead. The batteries typically last between 3-5 years, but they can become depleted over time, especially if the fob is dropped frequently. You can replace the battery with a new one, but make sure that it's the same size and voltage as the original. If you choose to use a brand new battery, it may cause the key to be assigned an incorrect key ID. This can prevent it from being paired with your vehicle.

The best method to replace the battery of a coin on a Nissan Qashqai key fob is by removing the fob with a small flat head screwdriver. The screwdriver needs to be inserted into a small cut on the bottom of the key fob. The screwdriver should be gently twisted to divide the two halves. Remove the old CR2025 battery and replace it with a brand new one, making note of the position of the old one in the fob.

Examine the terminals for water damage or dirt before installing the new battery. If so clean the terminals with small amounts of isopropyl alcohol. You should also ensure that the pole cables are plugged in correctly. They should be connected to the negative and positive poles of the battery, respectively.

Diagnostics of a fault

If your Nissan Qashqai's keys fob stops functioning after exposure to clean water from the tap or rain, this could be a sign there's a problem with the internal chip. You'll require a new keyfob if you are unable to fix the issue by replacing the battery. If the key fob stopped working after dropping it, it's likely that the chip inside was damaged. You can usually get the key fob to work once again if it is removed and clean the chip with alcohol and paper towels and then put it back into.

Key ID Incorrect is a common error that can be seen on the dashboard of your car. The vehicle is unable to recognize the key fob, and therefore will not allow the vehicle to start. The problem can be caused by many things, including water damage, undetectable problems in the circuitry of the key fob, or RFID interference.

The key fob will cease to function in the event that the 12 volt batteries are dead or fail to provide enough electrical current. This could affect your Nissan Qashqai's keyless system, central locking and the ability to start the engine with the key fob. Check the battery in the key fob if you're unable to lock or unlock your door manually. You can also try installing the battery again to reset your transmitter.

Reprogramming

Unless the key fob has been submerged in salt water the device should be able to return to life after a quick wash with clean water. You can also clean the electronic chip using isopropyl or electronic cleaner. If none of the above works, you may need to replace the key fob.

If your Nissan Intelligent Key still does not function, there could be a connection issue between it and the vehicle. Start by pressing the ignition key, but without starting the vehicle. Repeat this process until the hazard lights flash twice. After that, turn the car off and take the keys out.

Open the fob compartment in your vehicle. This is usually located in a door jamb, on the handle of the driver's side, or under an armrest. Find the small "program" button and press it. You will hear a chime after the process has been completed.

Now that your Intelligent Key is relinked to the car It's time to test it out. Make sure you press all the buttons on the key while standing at a distance from the vehicle. If the lights flash or the horn sounds, then the key is successfully connected to the Nissan. You can also test it near the Nissan.